ANYCUBIC Kobra 3 Printhead Assembly Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC's printhead assembly (part S010240) is the complete factory print head for the Kobra 3, Kobra 3 Combo, Kobra 3 V2 and Kobra 3 V2 Combo, and the listing warns in capitals that it does not fit the Kobra 3 Max. It is the part to buy when a head has a failed heater, thermistor, fan or board connection and you would rather swap the whole unit than chase the fault. ANYCUBIC promises a few-minute install with video guides and support. The catch is a thin listing: no parts breakdown, nozzle size or temperature rating. It costs under $50 and showed low stock at our check. Our notes come from the listing only.
What stands out
- Complete factory head, part S010240
- Fits Kobra 3 and Kobra 3 V2, with or without Combo
- Install videos and support offered
- Swaps in minutes, per ANYCUBIC
Who it fits
Good fit for
Kobra 3 and Kobra 3 V2 owners (including Combo versions) with a dead or damaged print head who want the fastest fix with an original part.
Who should skip it
Kobra 3 Max owners, who need ANYCUBIC's separate Max head, and anyone with a simple clog or worn nozzle, which a nozzle swap may solve for less.
Verdict: The quickest way to revive a Kobra 3 with a failed head, despite the sparse listing.
What the listing does and does not say
Part S010240
ANYCUBIC's model number; quote it when contacting support.
Kobra 3 / 3 Combo / 3 V2 / V2 Combo
The only printers named; the Kobra 3 Max is excluded.
1.1 lb, 7.48 x 5.63 x 5.12 in
Package size and weight from the spec block.
Contents not listed
No word on whether nozzle, fans or cutter come fitted.
Build information
ANYCUBIC says only that the head uses special materials and that original parts match better than market alternatives. There is no nozzle diameter, heater wattage or hot end temperature, so check your printer's spec sheet for those.
Swapping the head
Power off and let the head cool, unplug its cable, remove the mounting screws, fit the new unit and reconnect. Re-run auto leveling and a flow test afterwards. ANYCUBIC offers installation videos and consultants if you get stuck.
Before ordering
Checks.
Check before you buy
- Your printer is a Kobra 3 or Kobra 3 V2
- The fault is in the head, not the mainboard
- You accept the low-stock wait
- You will re-level after fitting
The product at a glance
ANYCUBIC Kobra 3 Printhead Assembly
Best for: Kobra 3 head replacement
- Color
- Black
- Resin Type
- Tough
- Dimensions
- 5.12 × 7.48 × 5.63 inches
- Weight
- 1.1 pounds
View on Amazon: ANYCUBIC Kobra 3 Printhead Assembly Affiliate link
ANYCUBIC original printhead assembly S010240 for Kobra 3, Kobra 3 Combo, Kobra 3 V2 and V2 Combo (not Kobra 3 Max); quick install with video guides.
Pros
- Original part
- Whole-head swap
- Support and videos
Cons
- No contents or temperature data
- Low stock at our check
Good fit if
- Your Kobra 3 head has a heater or sensor fault
- You want an original replacement
Skip if
- You own a Kobra 3 Max
- Only the nozzle is clogged
Verdict: A fast whole-head fix for Kobra 3 owners.
Specifications side by side
| Spec | ANYCUBIC Kobra 3 Printhead Assembly |
|---|---|
| Color | Black |
| Resin Type | Tough |
| Dimensions | 5.12 × 7.48 × 5.63 inches |
| Weight | 1.1 pounds |
| Model | S010240 |
Frequently asked questions
Does this ANYCUBIC printhead fit the Kobra 3 Max?
No. The listing states it is not compatible with the Kobra 3 Max.
Will the S010240 head fit a Kobra 3 V2 Combo?
Yes, the Kobra 3 V2 and V2 Combo are both listed.
What comes in the ANYCUBIC Kobra 3 head assembly?
The listing does not give a parts list; ask ANYCUBIC support with part number S010240.
Is the Kobra 3 printhead hard to install?
ANYCUBIC says it takes a few minutes and provides videos.
Featured in
See also
- anycubic kobra 3 max printhead assembly review
- anycubic fep film 2pcs photon review
- anycubic kobra 3 USB monitoring camera review
- anycubic 5pcs 10 1 inch acf high review
- ANYCUBIC 4-in-1 Filament Hub for Kobra Review (2026)
- ANYCUBIC Mini Purifier & Heater Review (2026)
- ANYCUBIC Photon Mono 4 LCD Screen Replacement Review (2026)
- ANYCUBIC Photon P1 Heated Resin Vat Review (2026)
- anycubic resin 3d printer review
- easycargo 30pcs 3d printer heatsink review
