Phrozen Cure Mega S Curing Station Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Large resin prints are hard to cure evenly in a small lamp box, and wet parts cure badly. Phrozen's Cure Mega S is a big drying and curing station built for that job. You choose dry, cure, or dry followed by cure in a few taps. A 360° light source and a transparent turntable light the model from all sides, two fans at 1700 rpm each dry the parts, an interior light lets you watch the state of the model, and a removable rack lets you cure one tall part or a tray of small ones. Phrozen gives the outer size as 39.5 × 47.5 × 48.6 cm and the weight as 33.1 lb, and the title names 405nm light for LCD, DLP and SLA prints. The listing gives no inner chamber size, lamp power or timer range, so check those with Phrozen before relying on it for a specific model size.
What stands out
- Dry, cure or dry-then-cure modes
- 360° light with a clear turntable
- Two 1700 rpm drying fans
Who it fits
Good fit for
Resin users printing large or many parts, such as Sonic Mega owners, who want drying and curing in one box.
Who should skip it
Anyone with small printers and small parts, and anyone short of bench space for a 33 lb unit.
Verdict: A big, well-equipped curing station for large resin parts; the missing chamber size is the main gap.
Cure Mega S specs
Dry / cure / both
Selected in a few taps.
360° light + clear turntable
Even exposure.
2 fans, 1700 rpm each
Fast drying.
Interior light
See the model inside.
Removable rack
Tall parts or many small ones.
39.5 × 47.5 × 48.6 cm, 33.1 lb
Outer size and weight.
Drying before curing
Curing a part that is still wet with alcohol can leave a cloudy or tacky surface. The Cure Mega S handles this inside one chamber: the two fans dry the part, then the light cures it, and the combined mode runs both in sequence. The clear turntable matters because light also reaches the underside, so you turn the part less often by hand.
Fitting it into a workflow
Wash the part, move it onto the rack or turntable, and pick the combined mode for most jobs. Take out the rack for one tall model; leave it in for a batch of minis. Choose the Cure Mega S if you print large resin parts on a 15-inch class printer; choose a compact wash-and-cure unit if your printer is a small 7-inch model and bench space is tight.
Before you order
Checks for the Phrozen Cure Mega S.
Check before you buy
- Your bench takes a 39.5 × 47.5 cm footprint
- Your largest part fits the chamber (ask Phrozen)
- You wash parts separately first
- You want drying and curing in one unit
The product at a glance
Phrozen Cure Mega S Post-Curing Station
Best for: Large resin parts
- Dimensions
- L39.5 x W47.5 x H48.6 cm
- Printing Technology
- Resin
- Finish
- Transparent
- Curing Wavelength
- 405nm
- Weight
- 33.1 pounds
View on Amazon: Phrozen Cure Mega S Post-Curing Station Affiliate link
Phrozen Cure Mega S: dry, cure or dry-then-cure; 360° light with a clear turntable; two 1700 rpm fans; removable rack; 33.1 lb.
Pros
- Dries and cures in one chamber
- Even all-round light
- Rack comes out for big parts
Cons
- No inner size or lamp power listed
- Heavy, large footprint
Good fit if
- You print large resin parts
- You want drying before curing
Skip if
- You only print small minis
Verdict: A strong pick for large-format resin post-processing.
Specifications side by side
| Spec | Phrozen Cure Mega S Post-Curing Station |
|---|---|
| Dimensions | L39.5 x W47.5 x H48.6 cm |
| Printing Technology | Resin |
| Finish | Transparent |
| Curing Wavelength | 405nm |
| Weight | 33.1 pounds |
| Size | L39.5 x W47.5 x H48.6 cm |
| Color | Cure Mega S |
| Model | CUREMEGAS00US |
Frequently asked questions
What modes does the Phrozen Cure Mega S have?
Dry, cure, or dry followed by cure.
How fast are the Cure Mega S fans?
Two fans at 1700 rpm each.
Does the Cure Mega S light the underside of a part?
Yes, a 360° light and a transparent turntable light the model from all sides.
How heavy is the Phrozen Cure Mega S?
33.1 lb, with an outer size of 39.5 × 47.5 × 48.6 cm.
Can I cure tall parts in the Cure Mega S?
The rack is removable to make room for big models; Phrozen lists no inner chamber size.
See also
- phrozen 15 inch build platform sonic mega 8k review
- phrozen 15 inch build plate sonic mega 8k s review
- phrozen foldable enclosure mega review
- phrozen 3pcs acf film high review
- phrozen wash cure kit review
- Phrozen Hands-Free Resin Bottle Mixer and Heater Review: Specs, Pros and Cons
- Phrozen 16K Upgrade Kit for Sonic Mighty 14K Review: Who It Fits
- Phrozen 15-Inch Resin Vat for Sonic Mega 8K S Review: Who It Fits
- phrozen sonic mega 8k s resin 3d printer review
- unxuey 50pcs 3d printer heatsink review
