Siraya Tech Fast ABS-Like Resin 1kg Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Siraya Tech Fast in grey is a 1kg ABS-like resin that aims to sit between hobby and functional printing: it flows easily for quicker prints, cures non-brittle enough to survive the odd fall, and is billed as 8K capable on most LCD and DLP printers. It costs under $30. Siraya Tech also stresses low odor and easy cleanup, saying an air gun and an alcohol spray are enough to rinse prints. Grey shows detail well for painting tabletop pieces, and the listing singles out small and half-length models. No exposure times or mechanical figures are given. We have only the listing to go on, not our own prints.
What stands out
- Non-brittle ABS-like cure
- Low odor
- Fast, low-viscosity flow
- 8K LCD and DLP ready
Who it fits
Good fit for
Resin hobbyists printing busts, tabletop minis and small parts who want a grey everyday resin that is tougher than basic standard resin and quick to wash.
Who should skip it
Parts that must flex or take real load need a dedicated tough resin such as Siraya Tech's Blu. A larger bottle of the same grey is sold separately if you print a lot.
Verdict: An affordable, forgiving everyday resin with a little extra toughness.
Fast ABS-Like resin in practice
ABS-like, non-brittle
Thin parts are less likely to snap during support removal or a drop.
Good fluidity
Low viscosity lets layers recoat quickly, which helps speed and print success.
8K capable
Holds detail on high-resolution mono LCD printers.
Grey
A neutral color that shows surface detail and takes primer and paint well.
Listing notes
One bullet says the resin has volume shrinkage while its heading promises low shrinkage, and another misspells odor as "order". There are no exposure, hardness or viscosity figures, and the shipping weight of 2.2 lb is the only quantity in the spec table besides the 1kg size.
Printing and cleanup
Shake the bottle, run a calibration print, and keep the room near normal temperature for consistent flow. Siraya Tech says alcohol spray and an air gun clean prints; a quick dip wash still helps with recesses. Post-cure lightly so the parts keep their non-brittle feel.
Before buying
A short list.
Check before you buy
- Printer cures at 405nm
- You can run your own exposure test
- Grey suits painting
- Gloves and ventilation ready
The product at a glance
Siraya Tech Fast ABS-Like Resin 1kg
Best for: Painted tabletop models
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Speed, High Precision, Non-Brittle
- Size
- 1KG
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
View on Amazon: Siraya Tech Fast ABS-Like Resin 1kg Affiliate link
Siraya Tech Fast grey ABS-like 1kg resin: non-brittle, low odor, quick-flowing and 8K capable on LCD and DLP printers.
Pros
- Tougher than basic resin
- Low odor, easy rinse
- Good detail for minis
Cons
- No exposure settings
- Shrinkage claims contradict
- Not for flexing parts
Good fit if
- You print minis and busts in grey
- You want easy cleanup
Skip if
- You need flexible functional parts
- You need datasheet values
Verdict: Forgiving grey resin for everyday prints.
Specifications side by side
| Spec | Siraya Tech Fast ABS-Like Resin 1kg |
|---|---|
| Printing Technology | Resin |
| Compatible Material | ABS |
| Features | High Speed, High Precision, Non-Brittle |
| Size | 1KG |
| Resin Type | ABS-Like |
| Curing Wavelength | 405nm |
| Dimensions | 5.12 × 5.94 × 8.46 inches |
| Weight | 2.2 pounds |
| Color | Grey 1kg |
Frequently asked questions
Is Siraya Tech Fast ABS-Like resin brittle?
Siraya Tech says it is not fragile and survives the occasional fall.
How do you clean Siraya Tech Fast prints?
The listing suggests an air gun and alcohol spray.
Does Siraya Tech Fast work on 8K printers?
Yes, it is listed as 8K capable on most LCD and DLP printers.
Does Siraya Tech list exposure times for Fast grey?
Not on this page, so calibrate on your printer.
Featured in
See also
- siraya tech cast castable resin review
- siraya tech blu tough resin review
- jayo petg filament review
- siraya tech fibreheart pet cf filament review
- siraya tech fibreheart ppa filament review
- Siraya Tech Fast Mecha ABS-Like Resin (White, 1kg) Review
- fungdo LCD 3d printer review
- easycargo 30pcs 3d printer heatsink review
