As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Siraya Tech Cast 1kg Castable Resin Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Siraya Tech Cast is a purple 405nm castable resin made for jewelry and small metal parts: you print a ring, pendant or component, invest it, burn the resin out and cast metal in its place. Siraya Tech says it was developed as an affordable casting resin with jewelers, and that it contains some wax, which makes burnout easier than with wax-free casting resins. A 1kg bottle is under $65. The listing also says it needs no specially dry room or additive, sticks well to the build plate, and can be dyed. It names LCD printers first and says it has also been used on DLP. There is no burnout schedule or exposure data, and we have not cast with it ourselves.

What stands out

  • Contains wax for easier burnout
  • Rings, pendants and small metal parts
  • No dry room or additive needed
  • Purple for visible detail

Who it fits

Good fit for

Jewelers and small-parts makers with an investment casting setup who want an affordable resin for printed patterns on a 405nm LCD printer.

Who should skip it

Dental labs needing a stated wax share and dental-specific guidance may prefer a dedicated dental castable. Without a kiln and investment process, a castable resin is wasted money.

Verdict: An accessible castable for jewelry patterns, with burnout settings left to you.

Castable resin basics

Wax content

Wax helps the pattern melt and burn out cleanly; Siraya Tech does not give a percentage.

405nm, LCD first

Built for common mono LCD printers; DLP use is mentioned but secondary.

Good plate adhesion

Fewer failed prints on small, delicate jewelry pieces.

Dyeable purple

Color helps check fine detail before investing.

Missing details

The page does not state the wax percentage, ash residue, exposure times or a recommended burnout curve, all of which matter for castable resins. It mentions dentists among users but gives no dental guidance. Expect a few trial castings to settle a burnout cycle with your investment.

Printing for casting

Print thin shanks and prongs with careful supports, wash gently and dry fully before investing. Post-cure only as much as needed to handle the part. Run a test burnout with your investment powder and adjust ramp and hold times until the flask comes out clean.

Before buying Siraya Tech Cast

Confirm the basics.

Check before you buy

  • You have a burnout kiln and investment
  • Your printer is 405nm LCD
  • You can test a burnout cycle
  • Your pieces are small, like rings or charms

The product at a glance

Siraya Tech Cast 1kg Castable Resin

Best for: Ring and pendant patterns

Resin Type
Castable
Curing Wavelength
405nm
Compatible Technology
LCD, DLP
Net Weight
1000g
Application
Jewelry, rings, pendants, metal parts
Printing Technology
Resin

View on Amazon: Siraya Tech Cast 1kg Castable Resin Affiliate link

Siraya Tech Cast: purple 1kg 405nm castable resin with some wax for easier burnout, aimed at rings, pendants and small metal parts.

Pros

  • Wax helps burnout
  • Good plate adhesion
  • No special additive needed

Cons

  • No wax share or burnout curve
  • No exposure data
  • DLP use only mentioned

Good fit if

  • You cast jewelry from printed patterns
  • You print on a 405nm LCD

Skip if

  • You lack a casting setup
  • You want stated dental specs

Verdict: Affordable jewelry castable resin.

Specifications side by side

Spec Siraya Tech Cast 1kg Castable Resin
Resin Type Castable
Curing Wavelength 405nm
Compatible Technology LCD, DLP
Net Weight 1000g
Application Jewelry, rings, pendants, metal parts
Printing Technology Resin
Size 1KG
Dimensions 5.91 × 5.12 × 8.27 inches
Color Purple 1000g

Frequently asked questions

Does Siraya Tech Cast contain wax?

Yes, it contains some wax, though the amount is not stated.

What can Siraya Tech Cast be used for?

Rings, pendants and small metal functional parts made by investment casting.

Does Siraya Tech Cast need a dry environment?

Siraya Tech says it prints and burns well without one or any special additive.

Is a burnout schedule given for Siraya Tech Cast?

Not on the listing, so plan test castings.

See also