Siraya Tech Blu Tough Resin 1kg Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Siraya Tech Blu in Clear V2 is a tough 1kg resin for functional parts: brackets, bases and pieces that carry load without deforming, and that should survive a drop rather than shatter. It sells for under $35. Siraya Tech describes a balance of hardness and impact resistance, plus fine detail and a smooth surface. Two practical notes stand out. The resin is very viscous, and Siraya Tech recommends printing at 25°C. It can also be mixed into other resins as an additive to make them tougher. It is listed for most LCD and DLP printers. Exposure and strength figures are absent, and we are working from Siraya Tech's listing only.
What stands out
- Tough, impact-resistant parts
- Clear V2 color
- Toughening additive for other resins
- Print at 25°C
Who it fits
Good fit for
Resin users making functional parts such as brackets, mounts and enclosures, or anyone who wants to blend a tougher resin into a brittle standard one.
Who should skip it
Cold workshops without a heater will fight the high viscosity. For painted display models, Siraya Tech's Fast ABS-Like is cheaper and quicker to work with.
Verdict: A versatile tough resin, best in a warm room and useful as a blend.
Blu Tough features explained
Hardness plus impact resistance
Parts flex a little under shock instead of cracking, unlike brittle standard resin.
High viscosity
Thicker resin needs slower lifts and longer settle times; warmth helps it flow.
25°C printing
Keep the vat warm in winter or prints may fail.
Mixable additive
Adding Blu to other resins raises their toughness, per Siraya Tech.
Listing notes
One bullet calls the resin highly viscous while another says it has good fluidity, so expect it to be on the thick side. The compatibility line says "LCP and DLP", a typo for LCD. No mixing ratio for use as an additive, exposure time or impact number is given.
Printing Blu in practice
Warm the room or vat toward 25°C, stir before printing, and slow the lift speed for large cross-sections. Clear resin shows wash residue, so rinse well and dry before curing. When blending into another resin, start with a small share and test parts before scaling up.
Before ordering Blu
Things to check.
Check before you buy
- You can keep the vat near 25°C
- You print load-bearing parts
- Clear finish suits you
- You will calibrate exposure
The product at a glance
Siraya Tech Blu Tough Resin 1kg
Best for: Functional resin parts and blends
- Resin Type
- Tough
- Curing Wavelength
- 405nm
- Compatible Technology
- LCD, DLP
- Net Weight
- 1kg
- Application
- Functional parts
- Printing Technology
- Resin
View on Amazon: Siraya Tech Blu Tough Resin 1kg Affiliate link
Siraya Tech Blu Clear V2: a 1kg tough resin for brackets and load-bearing parts, high viscosity best printed at 25°C, mixable into other resins.
Pros
- Strong yet not brittle
- Doubles as toughening additive
- Smooth, detailed surface
Cons
- Very viscous
- No mixing ratio or exposure data
- Typo-ridden listing
Good fit if
- You print brackets or mounts in resin
- You want to toughen a brittle resin
Skip if
- Your workshop runs cold
- You only print display minis
Verdict: A tough clear resin for warm workshops.
Specifications side by side
| Spec | Siraya Tech Blu Tough Resin 1kg |
|---|---|
| Resin Type | Tough |
| Curing Wavelength | 405nm |
| Compatible Technology | LCD, DLP |
| Net Weight | 1kg |
| Application | Functional parts |
| Printing Technology | Resin |
| Features | High Speed |
| Size | 1KG |
| Resolution | 8K |
| Dimensions | 5.91 × 5.12 × 8.27 inches |
| Weight | 2.2 pounds |
| Color | Clear V2 1000g |
| Model | Blu Clear V2 |
Frequently asked questions
What temperature should Siraya Tech Blu be printed at?
Siraya Tech recommends 25°C because the resin is very viscous.
Can Siraya Tech Blu be mixed with other resin?
Yes, it is sold as an additive that raises toughness; no ratio is given.
Is Siraya Tech Blu Clear V2 for functional parts?
Yes, brackets, bases and load-carrying parts are the listed uses.
Which printers suit Siraya Tech Blu Tough?
Most LCD and DLP resin printers, per the listing.
