As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Siraya Tech Fibreheart PET-CF Filament Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Fibreheart PET-CF is Siraya Tech's carbon fiber reinforced PET filament, sold as a 1kg black spool in a foil-sealed bag for under $50. The pitch is stiffness and shape stability without the moisture fuss of nylon composites: Siraya Tech says the fibers form a skeleton in the PET that boosts strength and heat resistance, that prints do not warp, and that the material absorbs little moisture. Suggested uses are drone frames, mechanical assemblies and sporting gear. The listing gives no fiber percentage, print temperatures or strength figures, so the claims stay qualitative. Our notes come from Siraya Tech's page, not test prints.

What stands out

  • Carbon fiber in a PET base
  • Low warping claimed
  • Low moisture absorption
  • Foil-sealed 1kg spool

Who it fits

Good fit for

Makers who want stiff, dimensionally stable functional parts, like drone arms or fixtures, and prefer a composite that is less moisture-sensitive than PA-CF.

Who should skip it

Anyone printing with a brass nozzle should hold off, since carbon fiber wears it out. Projects that need published tensile or heat numbers are better served by a filament with a datasheet.

Verdict: A promising, easier-going carbon fiber filament, short on hard numbers.

What PET-CF offers

PET + carbon fiber

Adds stiffness and stability to a base polymer related to PETG, which most printers handle.

Low moisture absorption

Less drying hassle than nylon composites, though dry storage still helps.

Low warp

Larger flat parts should hold their shape, per Siraya Tech.

Foil-sealed bag

Keeps the spool dry until you open it.

Listing gaps and errors

Siraya Tech claims less deformation under long-term load than PA and PC materials but cites no test. The spec model reads "3003" and the spec weight is 2.65 lb, likely spool and packaging. One bullet is cut off mid-sentence with garbled characters. No nozzle, bed or speed settings are listed.

Printing Fibreheart PET-CF

Swap to a hardened steel nozzle, preferably 0.4mm or larger to avoid clogs from fibers. Start from a PET or PETG-CF profile and adjust temperature with a tower. A matte, fiber-filled surface hides layer lines well but shows less gloss than plain PETG.

Before ordering PET-CF

Quick check.

Check before you buy

  • Hardened nozzle on hand
  • You can tune a PET-type profile
  • Matte black finish is fine
  • Stiffness matters more than flex

The product at a glance

Siraya Tech Fibreheart PET-CF 1kg

Best for: Stiff parts without nylon fuss

Material Type
PET-CF
Net Weight
1kg
Features
Carbon Fiber
Dimensions
8.27 × 2.91 × 8.27 inches
Weight
2.65 pounds

View on Amazon: Siraya Tech Fibreheart PET-CF 1kg Affiliate link

Siraya Tech Fibreheart PET-CF: carbon fiber reinforced PET, 1kg black, foil sealed, claimed low warp and low moisture uptake.

Pros

  • Stiff and dimensionally stable
  • Less moisture-sensitive than PA-CF
  • Low warp claimed

Cons

  • No fiber percentage or temps
  • No strength data
  • Garbled listing text

Good fit if

  • You print drone frames or fixtures
  • You want carbon fiber without nylon drying

Skip if

  • You only have a brass nozzle
  • You need datasheet numbers

Verdict: Easy-going carbon fiber PET with thin data.

Specifications side by side

Spec Siraya Tech Fibreheart PET-CF 1kg
Material Type PET-CF
Net Weight 1kg
Features Carbon Fiber
Dimensions 8.27 × 2.91 × 8.27 inches
Weight 2.65 pounds
Color Pet-cf Black 1kg
Model 3003

Frequently asked questions

Does Siraya Tech Fibreheart PET-CF need drying?

Siraya Tech claims low moisture absorption; drying a long-open spool still helps.

What fiber content does Fibreheart PET-CF have?

The listing does not give a carbon fiber percentage.

Does Fibreheart PET-CF warp?

Siraya Tech says internal stress release prevents warping.

What is Siraya Tech Fibreheart PET-CF good for?

Stiff, light functional parts such as drone frames and mechanical assemblies.

See also