JAYO TPU 95A Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
JAYO's grey TPU 95A is a firm flexible filament on a 1kg reusable spool, priced under $20, and unlike many budget TPUs it lists its settings: 190-230°C at the nozzle, 50-60°C on the bed, and print speeds below 60mm/s. JAYO also asks you to print and store it below 20% relative humidity, which is sound advice for TPU. Tolerance is ±0.03mm, and JAYO dries each roll for a day before vacuum packing it. Suggested uses are everyday items that need some give, like phone cases, grips and bumpers. One oddity: JAYO says it suits high-speed printers, yet caps speed at 60mm/s. All of this is drawn from JAYO's listing.
What stands out
- Listed temps: 190-230°C nozzle, 50-60°C bed
- Under 60mm/s print speed
- Store below 20% RH
- Grey 1kg reusable spool
Who it fits
Good fit for
Beginners to flexible filament who want a cheap 95A TPU with real starting settings, for phone cases, grips, feet and bumpers on a direct-drive printer.
Who should skip it
Speed printers will find the 60mm/s cap slow. Bowden-tube machines may still struggle even with 95A, and soft-touch parts need a lower Shore grade.
Verdict: Inexpensive TPU with usable settings, as long as you print it slowly and dry.
JAYO TPU settings explained
Shore 95A
The firmest common TPU grade: flexible but easiest to feed.
190-230°C, bed 50-60°C
A clear starting window; most printers land in the middle.
Below 60mm/s
Slow feeding avoids buckling and jams in the extruder.
Under 20% RH
TPU absorbs moisture fast; damp spools string and bubble.
Small listing conflicts
The bullets call the material both hard yet flexible and soft, which fits a 95A grade but says little about feel. The spec weight is 2.43 lb, more than the 1kg title, probably including the spool. The high-speed printer claim sits awkwardly with the sub-60mm/s limit; follow the limit.
Printing JAYO TPU
Print from a dry box if your room is humid, set speed around 25-40mm/s to start, and cut retraction short. Begin near the middle of the 190-230°C range and raise it if layers look weak. Keep the filament clips on the spool so loose ends do not tangle.
Before buying JAYO TPU
Check these.
Check before you buy
- Direct-drive extruder
- Dry box or humidity under 20%
- Patience for slow prints
- Grey works for your parts
The product at a glance
JAYO 95A TPU Filament 1.75mm
Best for: First flexible prints
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- <60mm/s
- Dimensional Accuracy
- ±0.03mm
- Shore Hardness
- 95A
View on Amazon: JAYO 95A TPU Filament 1.75mm Affiliate link
JAYO grey TPU 95A, 1kg reusable spool, ±0.03mm, with listed settings of 190-230°C nozzle, 50-60°C bed and under 60mm/s.
Pros
- Print settings provided
- Low price
- Dried and vacuum packed
Cons
- Speed capped at 60mm/s
- Needs dry storage
- Spec weight above 1kg
Good fit if
- You are new to TPU and want settings
- You print phone cases or grips
Skip if
- You want fast flexible prints
- You need a softer Shore grade
Verdict: Budget 95A TPU with real starting settings.
Specifications side by side
| Spec | JAYO 95A TPU Filament 1.75mm |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | <60mm/s |
| Dimensional Accuracy | ±0.03mm |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Color | Grey |
| Weight | 2.43 pounds |
| Size | 95A |
Frequently asked questions
What temperature does JAYO TPU 95A print at?
JAYO lists 190-230°C nozzle and 50-60°C bed.
How fast can JAYO TPU 95A be printed?
Below 60mm/s, per the listing.
How should JAYO TPU be stored?
JAYO advises keeping humidity below 20% RH while printing and storing.
What tolerance does JAYO TPU 95A have?
±0.03mm.
