JAYO ABS Filament Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
JAYO ABS in grey is a 1kg, 1.75mm spool for functional parts that need more heat tolerance and toughness than PLA, at under $15. JAYO quotes a heat deformation temperature of "90", most likely °C though the unit is missing, and holds diameter to ±0.03mm across the spool. The neutral grey is meant to look finished straight off the bed while taking sanding, paint or acetone smoothing well, which is ABS's main trick over PETG. Suggested uses include car interior parts, household items and mechanical prototypes. JAYO lists no nozzle, bed or enclosure advice. We are going on the listing alone here.
What stands out
- Heat deformation figure of 90 (unit missing)
- ±0.03mm tolerance
- Acetone smoothable
- Neutral grey
Who it fits
Good fit for
Makers with an enclosed printer who want cheap, heat-tolerant parts such as car interior clips, fan ducts or housings, and who like to sand, paint or vapor-smooth.
Who should skip it
Open-frame printers in a draughty room will see warping and cracked layers with ABS. Anyone sensitive to fumes or without ventilation should choose PETG.
Verdict: Basic, cheap ABS for enclosed printers, with settings you supply yourself.
ABS specs, translated
Heat deformation 90
Likely 90°C, enough for parts in a hot car or near warm electronics.
±0.03mm
Standard tolerance for steady extrusion on most printers.
Acetone smoothing
Vapor can melt away layer lines for a glossy finish.
Grey finish
Hides minor flaws and is a good base for primer and paint.
Listing gaps
The heat figure has no unit and no test method. There are no temperatures, no enclosure recommendation and no drying advice, all of which matter more for ABS than for PLA. The spec model is simply JAYO-ABS. Weight is given as 1kg (2.2lb), consistent with the title.
Printing ABS well
Use an enclosure, turn part cooling low or off, and let the bed preheat fully. A brim helps hold corners down on large parts. Print in a ventilated room, as hot ABS gives off a noticeable smell and fumes. For a smooth finish, sand first and then use acetone vapor carefully.
Before ordering JAYO ABS
Check your setup.
Check before you buy
- Your printer has an enclosure
- Bed reaches ABS temperatures
- Good ventilation
- You will tune your own profile
The product at a glance
JAYO ABS 1.75mm Grey Filament 1kg
Best for: Heat-exposed functional parts
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.03mm
- Printing Technology
- FDM
- Weight
- 2.2 pounds
View on Amazon: JAYO ABS 1.75mm Grey Filament 1kg Affiliate link
JAYO grey ABS, 1.75mm on a 1kg spool, ±0.03mm, heat deformation figure of 90, sandable and acetone smoothable.
Pros
- Low price
- Heat-tolerant parts
- Takes paint and acetone
Cons
- Heat figure has no unit
- No print settings
- Needs an enclosure
Good fit if
- You print car interior parts
- You vapor-smooth prints
Skip if
- Your printer is open-frame
- You cannot ventilate
Verdict: Cheap grey ABS for enclosed printers.
Specifications side by side
| Spec | JAYO ABS 1.75mm Grey Filament 1kg |
|---|---|
| Material Type | ABS |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.03mm |
| Printing Technology | FDM |
| Compatible Material | ABS |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Abs Grey |
| Model | JAYO-ABS |
Frequently asked questions
What heat can JAYO ABS parts handle?
JAYO lists a heat deformation temperature of 90, presumably °C.
Can JAYO grey ABS be smoothed with acetone?
Yes, the listing names acetone smoothing along with sanding and painting.
Does JAYO ABS need an enclosure?
JAYO does not say, but ABS generally warps without one.
What print temperature does JAYO ABS use?
None is listed; start from your printer's ABS profile.
