JAYO Wood Fiber PLA Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
JAYO Wood PLA blends 15% real wood fiber into PLA, giving prints a matte, wood-like look that can be stained or polished afterward. It comes as 1.1kg net on one spool, 100g over a standard roll, for under $20, though stock was low at our check. JAYO aims it at architectural models, home decor and game pieces. Tolerance is ±0.02mm, rolls are pre-dried and vacuum packed, and filament clips are included. The wood share is stated, which many wood filaments skip, but there are no temperature or nozzle recommendations. This is a reading of JAYO's product page, with no prints of our own.
What stands out
- 15% real wood fiber
- Stainable and polishable
- 1.1kg net filament
- ±0.02mm tolerance
Who it fits
Good fit for
Hobbyists printing decor, figurines, architectural models or board game pieces who want a warm wood finish they can stain, without paying for premium wood filament.
Who should skip it
Fine-detail prints through a 0.2mm nozzle risk clogs with wood fill. Parts that need strength are better in plain PLA or PETG, as wood fiber weakens layers.
Verdict: A low-cost wood PLA with a stated fiber share and a bonus 100g.
Wood PLA specs explained
15% wood fiber
Enough for a visible grain-like texture and a wood smell when printing.
Stain or polish
Sanded prints take wood stain for a more convincing finish.
1.1kg net
A little more material per roll than a 1kg spool.
±0.02mm
Consistent diameter reduces feed problems with filled filaments.
Listing notes
The spec size field shows 1.75mm, the model code is JWUS-WOOD-WD-1.1KG, and the 2.43 lb weight matches 1.1kg. No print temperatures, minimum nozzle size or speed are listed. JAYO calls it clog-free, a strong claim for any wood-filled filament.
Printing with wood fill
Fit a nozzle of at least 0.4mm and avoid leaving hot filament parked in the nozzle for long, which can char wood particles. Varying temperature a little across layers can create a light-and-dark banding effect. Sand gently before staining to open the surface.
Before buying wood PLA
Quick checks.
Check before you buy
- Nozzle 0.4mm or larger
- Decorative rather than load-bearing parts
- Spool holder takes a 1.1kg roll
- You will test temperatures
The product at a glance
JAYO Wood Fiber PLA 1.1kg
Best for: Wood-look decor prints
- Material Type
- Wood PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1.1kg
- Dimensional Accuracy
- ±0.02mm
- Features
- Wood Filled
- Weight
- 2.43 pounds
View on Amazon: JAYO Wood Fiber PLA 1.1kg Affiliate link
JAYO Wood PLA with 15% real wood fiber, 1.1kg net, ±0.02mm, pre-dried and vacuum sealed, stainable after printing.
Pros
- Stated 15% wood share
- Takes stain and polish
- Extra 100g filament
Cons
- No temperatures given
- Weaker than plain PLA
- Low stock
Good fit if
- You print decor or game pieces
- You want a stainable finish
Skip if
- You print with a 0.2mm nozzle
- You need strong parts
Verdict: Affordable wood PLA for decorative prints.
Specifications side by side
| Spec | JAYO Wood Fiber PLA 1.1kg |
|---|---|
| Material Type | Wood PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1.1kg |
| Dimensional Accuracy | ±0.02mm |
| Compatible Material | PLA |
| Features | Wood Filled |
| Size | 1.75Mm |
| Weight | 2.43 pounds |
| Color | Wood |
| Model | JWUS-WOOD-WD-1.1KG |
Frequently asked questions
How much wood is in JAYO Wood PLA?
JAYO states 15% real wood fiber.
Can JAYO Wood PLA prints be stained?
Yes, the listing says they can be stained or polished.
What nozzle suits JAYO Wood PLA?
JAYO gives none; 0.4mm or larger lowers clog risk with wood fill.
How much does the JAYO Wood PLA spool hold?
1.1kg net.
Featured in
See also
- biqu designer series peo pei build plate review
- biqu panda lux bambu lab p1p review
- bigtreetech s42c v1 1 closed loop driver review
- jayo petg filament review
- jayo tpu 95a filament review
- JAYO ABS Filament Review (2026): A Spec-Based Look
- JAYO Chestnut Brown Wood PLA Filament (1.1kg) Review
- best 3d printers for wood
- fadiadem wood printer stand desktop review
