As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

BIGTREETECH S42C V1.1 Closed-Loop Stepper Review: Specs, Pros and Cons

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The S42C V1.1 is a closed-loop driver board sold here with a 42mm stepper motor and a metal protective cover. A magnetic encoder watches the motor shaft, and the STM32G031 Cortex-M0+ controller corrects lost steps as they happen, which BIGTREETECH says lets a printer run faster without skipping. The listing also claims lower heat, less noise and vibration than ordinary drivers, saved settings that reload on startup, and direct control over UART. It is sold assembled, so the board, motor and cover arrive as one unit. Price is under $40. The listing is a BIGTREETECH product filed in the hub under BIQU, BIGTREETECH's sister brand. We have not wired one up; these points come from the listing.

What stands out

  • Magnetic encoder closed loop
  • Motor and metal cover included
  • UART control, saved settings
  • Upgrade over the S42B

Who it fits

Good fit for

Tinkerers who want to stop layer shifts on a fast or heavy axis, such as a bed-slinger Y axis, and are comfortable wiring a driver into their mainboard.

Who should skip it

Owners of sealed, plug-and-play printers like Bambu machines cannot easily swap motors. If your printer does not shift layers, a closed-loop motor adds cost and wiring for little gain.

Verdict: A neat closed-loop add-on for DIY printers, light on electrical specs.

What closed loop adds

Magnetic encoder

Measures actual shaft position so missed steps can be corrected instead of becoming layer shifts.

STM32G031 Cortex-M0+

A faster controller than the S42B's, per BIGTREETECH, for quicker correction.

UART mode

Settings can be changed from the mainboard or a serial connection.

Saved parameters

Tuning stays in memory after power-off.

Missing electrical details

The listing gives no holding torque, rated current, step angle, input voltage or motor length, and no wiring diagram, so check BIGTREETECH's documentation before ordering. The spec weight is 12.3 ounces for the set and the model code is ZZB000577. The title says "Prevent Multi-Step", which reads as a translation slip for lost steps.

Fitting it

The driver takes step and direction signals from your mainboard, so plan the wiring and firmware settings first. Calibrate the encoder after mounting as the board instructions describe, then tune current and speed limits with a few test moves before a long print.

Before ordering the S42C

Things to confirm.

Check before you buy

  • Your axis uses a 42mm stepper
  • You can wire step/dir signals
  • You have checked torque and current in the docs
  • Layer shifts are a real problem for you

The product at a glance

BIQU S42C Closed Loop Stepper Driver

Best for: DIY printers with layer shifts

Features
High Speed
Weight
12.3 ounces

View on Amazon: BIQU S42C Closed Loop Stepper Driver Affiliate link

BIGTREETECH S42C V1.1 closed-loop driver with 42 stepper and metal cover: magnetic encoder, STM32G031 controller, UART control and saved settings.

Pros

  • Corrects lost steps
  • Motor and cover included
  • Quieter, cooler running claimed

Cons

  • No torque or current specs
  • No wiring guide in listing
  • Not for closed printers

Good fit if

  • Your DIY printer shifts layers
  • You want faster moves without skipping

Skip if

  • You own a sealed Bambu-style printer
  • You do not want to rewire axes

Verdict: A closed-loop fix for layer shifts on DIY printers.

Specifications side by side

Spec BIQU S42C Closed Loop Stepper Driver
Features High Speed
Weight 12.3 ounces
Color silver
Model ZZB000577

Frequently asked questions

Does the S42C V1.1 come with a motor?

Yes, this set includes the S42C V1.1 board, a 42 stepper motor and a metal cover.

How does the S42C prevent layer shifts?

A magnetic encoder detects lost steps and the controller compensates.

Can the BIGTREETECH S42C be controlled over UART?

Yes, the listing says it supports direct UART control.

What torque does the S42C motor have?

The listing does not state it.

See also