BIQU Designer Series PEO/PEI Build Plate Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
BIQU's Designer Series plate is a 257×257mm flexible spring steel sheet with two different print surfaces: smooth PEO on one side and textured PEI on the other, in a black and gold finish. It is sized for Bambu Lab's 257mm beds, and BIQU names the P1P, P1S, P2S, X1C, X1E, X2D and A1. Owners of the P2S or X2D are told to switch off the printer's build plate detection, since the printer will not recognize a third-party sheet. Prints release by flexing the sheet, with no scraper needed. At under $25 it gives two finishes for the price of a spare plate. The details here come straight from BIQU's listing.
What stands out
- Smooth PEO and textured PEI sides
- Fits 257mm Bambu Lab beds
- Flex to release prints
- Under $25 for two surfaces
Who it fits
Good fit for
Bambu Lab P1, X1, A1, P2S and X2D owners who want a glossy smooth bottom on some prints and a textured one on others without buying two plates.
Who should skip it
A1 Mini owners need a smaller plate. If you rely on plate detection on a P2S or X2D, turning it off may not suit your workflow.
Verdict: A cheap way to get both a smooth and a textured surface on a 257mm Bambu bed.
What each side does
Smooth PEO
Gives a glossy, flat bottom face; PEO tends to hold PLA and PETG well.
Textured PEI
Leaves a matte, grippy pattern and usually releases PETG easily once cool.
257×257mm spring steel
Drops onto the magnetic bed of supported Bambu models and bends to pop parts off.
P2S/X2D note
Build plate detection must be turned off for the printer to accept it.
Unclear points
BIQU says the smooth PEO side "can print diamond pattern" without explaining whether the Designer Series surface has a decorative texture. Heat limits, coating thickness and adhesive guidance are not given. The flatness and flame-retardant claims carry no figures.
Using a double-sided plate
Wipe both sides with isopropyl alcohol before use, and wash occasionally with dish soap to restore grip. Let the plate cool before flexing it, and do not bend it sharply or the steel can take a set. Select the matching plate type in your slicer so bed temperatures fit the surface.
Before ordering
Make sure it fits.
Check before you buy
- Your Bambu bed is 257×257mm
- You can disable plate detection on P2S/X2D
- You want both smooth and textured finishes
- You have a slicer plate profile for PEO
The product at a glance
BIQU 257x257mm PEO and PEI Build Plate
Best for: Bambu owners wanting PEO and PEI
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Build Surface Type
- Smooth PEO, textured PEI
- Build Plate Material
- PEI, Spring Steel, PEO
View on Amazon: BIQU 257x257mm PEO and PEI Build Plate Affiliate link
BIQU Designer Series 257×257mm spring steel plate with smooth PEO and textured PEI sides for Bambu Lab P1, P2S, X1, X2D and A1 printers.
Pros
- Two finishes in one plate
- Flexible print release
- Low price
Cons
- Plate detection off on P2S/X2D
- No heat or care specs
- Unclear diamond pattern claim
Good fit if
- You own a 257mm Bambu printer
- You switch between glossy and textured bottoms
Skip if
- You have an A1 Mini
- You depend on plate detection
Verdict: Two surfaces for 257mm Bambu beds at a low price.
Specifications side by side
| Spec | BIQU 257x257mm PEO and PEI Build Plate |
|---|---|
| Primary Material | Spring steel |
| Dimensions | 257x257mm |
| Build Surface Type | Smooth PEO, textured PEI |
| Build Plate Material | PEI, Spring Steel, PEO |
| Build Plate Size | 257x257mm |
| Surface Finish | Smooth, Textured |
| Size | P1/P2/X1/A1/X2D |
| Color | PEO+PEI-Black/Gold |
Frequently asked questions
Which printers fit the BIQU Designer Series plate?
Bambu Lab P1P, P1S, P2S, X1C, X1E, X2D and A1 with 257×257mm beds.
Does the BIQU PEO/PEI plate work with Bambu plate detection?
On the P2S and X2D, BIQU says to turn plate detection off.
What surfaces does the BIQU Designer Series plate have?
Smooth PEO on one side and textured PEI on the other.
Does the BIQU Designer Series plate fit the A1 Mini?
No, it is sized for 257mm beds, not the smaller A1 Mini.
