As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

TMYPN 10.1-Inch Screen Protector 8-Pack for ELEGOO Saturn Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Eight films with an install kit for each is what sets this pack apart from most screen protector packs. TMYPN's 10.1-inch protectors fit the ELEGOO Saturn 3 Ultra, Saturn 3, Saturn 2 and Saturn 8K only, and the box holds 8 films, 8 tool kits and one plastic scraper. Each film is 0.1mm PET with over 95% light transmittance, and TMYPN says the 405nm UV that cures resin still passes through normally. The film keeps resin off the LCD when a release film fails and takes the scratches instead of the screen. TMYPN says print volume is unchanged. One fitting note: if the shading tape around your screen is too wide, it has to come off before the film goes on and then be stuck back. The details here are TMYPN's.

What stands out

  • 8 films with 8 tool kits
  • 0.1mm PET, over 95% transmittance
  • For Saturn 3 Ultra, 3, 2 and 8K

Who it fits

Good fit for

ELEGOO Saturn owners who want a long supply of screen films and the tools to fit them cleanly.

Who should skip it

Owners of other 10.1-inch printers not on TMYPN's list, and anyone wanting a tempered glass protector.

Verdict: A generous, well-equipped film pack for ELEGOO Saturn printers.

TMYPN Saturn film specs

10.1-inch

Saturn screen size.

8 films + 8 tool kits

Plus one scraper.

0.1mm PET

Thin film.

Over 95% transmittance

405nm UV passes.

Saturn 3 Ultra / 3 / 2 / 8K

Listed fit only.

Model TN0053

TMYPN part code.

Why the tool kits matter

Dust under a screen film shows up as a spot on every layer of the print. Each TMYPN film comes with its own tool kit, so every fit starts with fresh tools. With eight films you can change one whenever it scratches instead of stretching its life.

Fitting it

Clean the screen, check whether the shading tape around the LCD overlaps the active area, peel it back if needed, lay the film and stick the tape back down. Level the platform afterwards. Choose the TMYPN pack for a Saturn 2, 3, 3 Ultra or 8K; choose a pack cut for your exact printer if you own another 10.1-inch model.

Before you order

Checks for TMYPN Saturn films.

Check before you buy

  • Your printer is a Saturn 3 Ultra, 3, 2 or 8K
  • You can lift and re-stick the shading tape
  • You want several spare films
  • You will level after fitting

The product at a glance

TMYPN 10.1" Screen Protector for Elegoo Saturn

Best for: ELEGOO Saturn printers

Primary Material
PET
Printing Technology
Resin
Resolution
8K

View on Amazon: TMYPN 10.1" Screen Protector for Elegoo Saturn Affiliate link

TMYPN 8-pack 10.1-inch 0.1mm PET protectors with tool kits for ELEGOO Saturn 3 Ultra, Saturn 3, Saturn 2 and Saturn 8K.

Pros

  • Eight films with tool kits
  • High transmittance
  • Scraper included

Cons

  • Saturn models only
  • Shading tape may need lifting

Good fit if

  • You own an ELEGOO Saturn
  • You want a long film supply

Skip if

  • Your printer is not on the list

Verdict: Good value for Saturn owners.

Specifications side by side

Spec TMYPN 10.1" Screen Protector for Elegoo Saturn
Primary Material PET
Printing Technology Resin
Resolution 8K
Size Saturn 3 / 3 Ultra, Saturn 2, Saturn 8K
Model TN0053

Frequently asked questions

Which printers do TMYPN 10.1-inch films fit?

The ELEGOO Saturn 3 Ultra, Saturn 3, Saturn 2 and Saturn 8K only.

What comes in the TMYPN pack?

8 films, 8 tool kits and one plastic scraper.

How thick is the TMYPN screen protector?

0.1mm PET.

Does the TMYPN film block curing light?

TMYPN lists over 95% transmittance and says 405nm UV passes.

Do I need to remove the shading tape for the TMYPN film?

Only if it is too wide; remove it, fit the film and re-attach it.

See also