As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

TopHomer Dual Drive BMG Extruder Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

A stated gear ratio and E-step value is what makes TopHomer's BMG-style extruder easy to set up. Its two drive gears grip the filament from both sides, through a 3:1 reduction, and TopHomer recommends 385 steps per mm as a starting point, with a thumb screw to adjust grip. TopHomer says it handles all 1.75mm filaments including TPU and TPE. A groove under the body takes an E3D-style hotend for direct drive, or a Bowden fitting for a remote setup, and the light body keeps a direct drive toolhead fast. Listed printers are the Ender 3 V2 and Pro, Ender 5 Pro, CR-10S Pro and Prusa i3 DIY builds. The title names both left- and right-hand versions without saying which one ships or whether you choose; the page also lists no motor, so plan to reuse yours. Specs come from TopHomer's listing.

What stands out

  • 3:1 dual drive, 385 E-steps
  • Direct drive or Bowden mounting
  • TPU and TPE capable

Who it fits

Good fit for

Ender 3 V2, Ender 5 Pro or CR-10S Pro owners converting to direct drive or replacing a slipping stock extruder, especially for TPU.

Who should skip it

Anyone wanting a complete kit with motor and bracket, and buyers unsure which hand they need.

Verdict: A capable BMG-style upgrade with the numbers you need to tune it.

TopHomer BMG extruder specs

3:1 gear ratio

More torque, finer control.

385 E-steps

Suggested starting value.

Dual drive gears

Grip from both sides.

E3D hotend or Bowden groove

Either setup.

1.75mm incl. TPU/TPE

Listed filaments.

Motor

Not listed.

What 3:1 and dual drive do

A 3:1 reduction lets a small motor push filament with more force and finer steps than a direct gear, which helps retraction and flow control. The two gears grip from both sides, so soft TPU is less likely to buckle or be chewed flat. The thumb screw sets the pressure: tighter for hard filaments, looser for flexibles.

Fitting and tuning

Mount it on your bracket, attach your existing motor, fit the hotend or Bowden tube in the groove and set E-steps to 385, then fine-tune by extruding a measured length. Choose the TopHomer if you want a BMG-style unit with a published ratio and direct drive mounting; choose a clear-body Bowden-only extruder if you are not moving to direct drive.

Before you order

Checks for the TopHomer dual drive extruder.

Check before you buy

  • You know whether you need a left- or right-hand unit
  • You have a motor and bracket to reuse
  • You can set E-steps in firmware
  • Your printer is on TopHomer's list or similar

The product at a glance

TopHomer Dual Drive BMG Extruder

Best for: Direct drive conversions

Extruder Type
Dual Drive Extruder

View on Amazon: TopHomer Dual Drive BMG Extruder Affiliate link

TopHomer BMG-style dual drive extruder: 3:1 ratio, 385 E-steps suggested, TPU capable, direct drive or Bowden mounting; hand version unclear.

Pros

  • Published ratio and E-steps
  • Light for direct drive
  • Handles flexible filament

Cons

  • Left/right hand unclear
  • No motor listed

Good fit if

  • You are converting to direct drive
  • You print TPU

Skip if

  • You want a full kit with motor

Verdict: A solid BMG-style choice for Ender and CR-10 upgrades.

Specifications side by side

Spec TopHomer Dual Drive BMG Extruder
Extruder Type Dual Drive Extruder

Frequently asked questions

What gear ratio does the TopHomer extruder use?

3:1.

What E-step value does TopHomer suggest?

385 steps per mm as a starting point.

Can the TopHomer BMG extruder print TPU?

Yes, TopHomer lists TPU and TPE.

Is the TopHomer extruder direct drive or Bowden?

Either; a groove takes an E3D-style hotend or a Bowden fitting.

Does the TopHomer extruder come with a motor?

The listing does not mention one.

See also