Chitu Systems Conjure Sculpt Grey Resin 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Chitu Systems Conjure Sculpt in grey, 1kg, is a miniature and display-piece resin for people chasing surface quality: Chitu promises an extremely smooth finish and very clear detail, and says it is more durable than standard resin, to the point of surviving a fall from a desk. Grey is the usual choice for minis because it shows detail before painting. The trade-off is stated plainly by Chitu: higher viscosity makes it harder to print, and it needs a resin temperature of 25-30°C, so a cold room or an unheated vat will cause trouble. The 1kg bottle is the sensible trial size; if it works on your printer, the same resin comes in a 2kg grey bottle and in beige. The listing is only five short lines: no exposure times, wavelength, shrinkage or hardness figures, just compatibility with most LCD and DLP printers. Our review uses Chitu's listing and published specs.
What stands out
- Grey, 1kg
- Miniatures and display pieces
- Higher viscosity; print at 25-30°C
- More durable than standard resin (Chitu claim)
- No exposure or wavelength data
Who it fits
Good fit for
Miniature printers with a heated vat or a warm room who want a smooth, tougher grey resin and can dial in exposure themselves.
Who should skip it
Beginners, cold-garage printers without vat heating, and anyone who wants published exposure settings.
Verdict: A detail-first grey mini resin; try the 1kg bottle before buying bigger.
Conjure Sculpt grey details
1kg bottle
Trial size; the line also comes in 2kg.
Grey
Shows detail on minis before painting.
High viscosity
Slower to level; Chitu calls it harder to print.
25-30°C
Resin must be warm; heat the vat or room.
LCD / DLP
Chitu claims fit with most such printers.
What makes Conjure Sculpt different
Chitu positions Conjure Sculpt between standard and tough resins: smoother surface, clearer detail and more impact resistance than standard, at the cost of a thick resin that is harder to print. Chitu adds that it machines well, so parts can be sanded or drilled after curing.
Printing Chitu Conjure Sculpt grey
Warm the resin to 25-30°C before and during the print; a vat heater or warm enclosure helps with thick resins. Because no exposure times are given, run an exposure test such as a calibration matrix first. Give the plate more lift time than you would with standard resin so the thick liquid can flow back under the part.
Before buying Conjure Sculpt grey 1kg
Checks.
Check before you buy
- You can keep Conjure Sculpt grey at 25-30°C
- Your LCD or DLP printer suits thick Conjure Sculpt resin
- You can run a Conjure Sculpt exposure test
The product at a glance
Chitu Systems Conjure Sculpt Resin 1000g
Best for: Detailed grey minis
- Printing Technology
- Resin
- Color
- Grey
- Size
- 1KG
- Application
- Miniatures
- Dimensions
- 4.29 × 4.25 × 11.5 inches
- Weight
- 2.2 pounds
View on Amazon: Chitu Systems Conjure Sculpt Resin 1000g Affiliate link
Chitu Systems Conjure Sculpt grey 1kg: smooth, high-detail mini resin, tougher than standard per Chitu, high viscosity, print at 25-30°C; no exposure or wavelength data.
Pros
- Smooth, detailed surface claimed
- Tougher than standard resin
- 1kg trial size
Cons
- High viscosity, harder to print
- Needs 25-30°C resin
- No exposure settings
Good fit if
- You print minis with a heated vat
Skip if
- You print in a cold room without heating
Verdict: A detail-first grey mini resin for warm setups.
Specifications side by side
| Spec | Chitu Systems Conjure Sculpt Resin 1000g |
|---|---|
| Printing Technology | Resin |
| Color | Grey |
| Size | 1KG |
| Application | Miniatures |
| Dimensions | 4.29 × 4.25 × 11.5 inches |
| Weight | 2.2 pounds |
| Model | cinza 1000g |
Frequently asked questions
What is Chitu Conjure Sculpt resin made for?
High-detail miniatures and display pieces.
What temperature does Conjure Sculpt grey need?
Chitu recommends a print temperature of 25-30°C.
Is Conjure Sculpt grey harder to print than standard resin?
Yes, Chitu says its higher viscosity makes it harder to print.
Does Chitu list exposure times for Conjure Sculpt grey 1kg?
No; the listing gives no exposure or wavelength data.
Featured in
See also
- creality hyper abs filament review
- elegoo silk pla silver grey filament review
- filabees rapid pla plus neon yellow filament review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- premier water systems premier review
- besiost closet system review
