As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

CHINDRAG Photon Mono X 6Ks Screen Protector 2-Pack Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

CHINDRAG makes this 9.1-inch screen protector pack for a single printer: the ANYCUBIC Photon Mono X 6Ks. That matters because the older Mono X 6K uses a different 9.25-inch panel, so the two films are not interchangeable even though the names differ by one letter. Each film is 0.1mm PET with light transmittance above 95%, thin enough that UV passes through and resin cures as normal. The film's job is to sit between the LCD and any resin that escapes a torn release film, and to take scratches from cleaning tools; a replacement screen costs far more than a film. The box has two films, two tool kits, one plastic scraper and a manual, and the listing gives a clear four-step fit: clean, peel the backing and stick, push out bubbles with the scraper, then peel the front film. The size fields list 6.77x9.37 inches. Everything here reflects CHINDRAG's listing and published specs, with no film fitted by us.

What stands out

  • Two 9.1in PET films
  • Photon Mono X 6Ks only
  • 0.1mm, over 95% transmittance
  • Four-step install on the listing
  • Tool kits, scraper and manual included

Who it fits

Good fit for

Photon Mono X 6Ks owners who want a cheap barrier against resin leaks and scraper marks, and a spare film for the next incident.

Who should skip it

Mono X 6K (no s) and M3 Plus owners, who need a 9.25-inch film, and anyone with a different resin printer.

Verdict: Low-cost screen protection sized for the Mono X 6Ks alone.

CHINDRAG 9.1in film specs

9.1 inch

Matches the Mono X 6Ks screen; not the Mono X 6K.

0.1mm PET

Thin film that leaves curing unchanged.

Over 95% transmittance

Little loss of UV light.

2 films + 2 tool kits

One fitted, one spare.

Model 9.1-2

CHINDRAG's part code.

Why a screen film on the Mono X 6Ks

A release film can tear without warning, and resin that reaches a bare LCD can seep under the bezel. With a PET protector in place you peel the contaminated film off and fit the spare. It also protects the glass from a plastic scraper during vat cleaning.

Fitting the CHINDRAG film to a Mono X 6Ks

Follow the four steps on the listing: clean the screen with the kit's wipes, peel the backing and lay the film from one edge, chase bubbles out with the scraper, then peel the top layer. Fit it in a dust-free spot; a trapped speck shows up as a spot in every exposure.

Before buying the CHINDRAG Mono X 6Ks 2-pack

Checks.

Check before you buy

  • Your printer is the Photon Mono X 6Ks, not the 6K
  • Two Mono X 6Ks films are enough spares
  • You can fit a screen film without bubbles

The product at a glance

CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks

Best for: Mono X 6Ks screen care

Primary Material
PET
Film Thickness
0.1 mm
Printing Technology
LCD
Dimensions
9.37 × 6.77 × 0.5 inches

View on Amazon: CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks Affiliate link

CHINDRAG 2-pack of 9.1in 0.1mm PET screen films for the Photon Mono X 6Ks only, over 95% transmittance, with tool kits and a scraper.

Pros

  • Exact Mono X 6Ks fit
  • Clear install steps
  • Low cost per film

Cons

  • One printer only
  • Only two films
  • Easy to confuse with Mono X 6K

Good fit if

  • You own a Photon Mono X 6Ks

Skip if

  • Your ANYCUBIC takes a 9.25-inch film instead

Verdict: A cheap screen guard for the Mono X 6Ks.

Specifications side by side

Spec CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks
Primary Material PET
Film Thickness 0.1 mm
Printing Technology LCD
Dimensions 9.37 × 6.77 × 0.5 inches
Size For Mono X 6Ks
Model 9.1-2

Frequently asked questions

Does the CHINDRAG 9.1-inch film fit the Photon Mono X 6K?

No, it is listed only for the Mono X 6Ks.

How thick is the CHINDRAG Mono X 6Ks screen film?

0.1mm PET.

What comes in the CHINDRAG 9.1-inch pack?

Two films, two tool kits, one plastic scraper and a manual.

Does the CHINDRAG Mono X 6Ks film affect curing?

CHINDRAG gives over 95% transmittance, so UV passes through.

See also