As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

CHINDRAG Integrated FEP Film 5-Pack for Photon Mono 2/4 Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Replacing FEP the old way means unscrewing the vat frame, stretching a sheet and trimming it, and a slack film ruins prints. CHINDRAG's films for the Anycubic Photon Mono 2 and Mono 4 skip that: each one comes already fixed to its own ring, so you swap the whole film without cutting it or taking the vat's ring apart. The pack holds five films of 197 x 131 x 0.15mm. CHINDRAG states over 95% light transmittance and long-term stability at 204°C, and asks you to read the included manual before installing. The listing does not mention a screen protector or tools. For Mono 2 and Mono 4 owners who print often, five ring-mounted films mean a fast change whenever one clouds or tears. The details are CHINDRAG's.

What stands out

  • 5 ring-mounted FEP films
  • 197 x 131 x 0.15mm
  • Photon Mono 2 and Mono 4

Who it fits

Good fit for

Anycubic Photon Mono 2 and Mono 4 owners who want quick, no-trim FEP changes.

Who should skip it

Owners of other Photon models, and anyone who prefers cutting cheaper loose sheets.

Verdict: The easy way to change FEP on a Mono 2 or Mono 4.

CHINDRAG integrated FEP specs

5 films

Each on its own ring.

197 x 131 x 0.15mm

Film size and thickness.

Over 95% transmittance

Little effect on exposure.

204°C

Rated long-term temperature.

Mono 2 / Mono 4

Listed printers.

No cutting

Ring stays assembled.

Why ring-mounted film helps

Tension is the hard part of FEP replacement. A pre-mounted film arrives at a set tension, so there is no guessing with screws and no wrinkles at the corners. It also cuts the time the vat sits empty, which matters when you print every day.

Changing a film

Drain and clean the vat, remove the old ring film as the manual shows, fit the new one and check for leaks with a little alcohol before adding resin. Choose the CHINDRAG integrated films if you own a Mono 2 or Mono 4 and value a fast change; choose loose FEP sheets if you are happy to tension film yourself and want the lowest cost per sheet.

Before you order

Checks for CHINDRAG Mono 2/4 FEP films.

Check before you buy

  • Your printer is a Photon Mono 2 or Mono 4
  • You want films pre-mounted on rings
  • You will read the manual first
  • Five films suit how often you print

The product at a glance

CHINDRAG Mono 2 and 4 Integrated FEP Film

Best for: Photon Mono 2 and Mono 4

Dimensions
197x131x0.15mm
Maximum Temperature
204°C
Release Film Type
FEP
Film Thickness
0.15mm
Printing Technology
Resin

View on Amazon: CHINDRAG Mono 2 and 4 Integrated FEP Film Affiliate link

CHINDRAG 5-pack of ring-mounted FEP films for the Photon Mono 2/Mono 4: 197 x 131 x 0.15mm, over 95% transmittance.

Pros

  • No cutting or tensioning
  • Five films
  • High transmittance

Cons

  • Mono 2 and Mono 4 only
  • Costs more than loose sheets

Good fit if

  • You own a Mono 2 or Mono 4
  • You print often

Skip if

  • You prefer cutting loose sheets

Verdict: Saves time on every FEP change.

Specifications side by side

Spec CHINDRAG Mono 2 and 4 Integrated FEP Film
Dimensions 197x131x0.15mm
Maximum Temperature 204°C
Release Film Type FEP
Film Thickness 0.15mm
Printing Technology Resin
Size for Mono 2/Mono 4

Frequently asked questions

Which printers fit the CHINDRAG integrated FEP film?

The Anycubic Photon Mono 2 and Mono 4.

Do I need to cut the CHINDRAG FEP film?

No, each film comes fixed to its own ring.

How thick is the CHINDRAG FEP film?

0.15mm, at 197 x 131mm.

What light transmittance does CHINDRAG state?

More than 95%.

How many films are in the CHINDRAG pack?

Five.

See also