As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

CHINDRAG Integrated FEP Film 2-Pack for Photon Mono 2K/4K, Ultra, D2 Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

CHINDRAG's pack holds two FEP release films that come already fixed in a ring, so you swap the whole film without cutting a sheet or taking the vat's clamp ring apart. The listing names the ANYCUBIC Photon Mono 2K, Mono 4K, Photon Ultra and Photon D2, and states clearly that it does not fit the Mono 2 or Mono 4, which use a larger film. Each film is 173x115.4mm at 0.15mm, with transmittance above 95% and a long-term working rating of 204°C. A ring-mounted film is the easy path for someone who has never re-tensioned FEP: tension is set at the factory, so the usual guesswork about the drum sound goes away. The cost is that you replace the ring each time instead of only the film. CHINDRAG says to read the manual in the package before fitting and does not reproduce the steps on the page. Our summary relies on CHINDRAG's listing and published specs only; no film was swapped in for this review.

What stands out

  • Two ring-mounted FEP films
  • 173x115.4x0.15mm
  • Mono 2K, Mono 4K, Photon Ultra, D2
  • Not for Mono 2 or Mono 4
  • Over 95% transmittance, 204°C rating

Who it fits

Good fit for

Owners of a Photon Mono 2K, Mono 4K, Photon Ultra or D2 who want a no-cut, pre-tensioned film change.

Who should skip it

Mono 2 and Mono 4 owners (wrong size), and anyone happy to cut and tension loose FEP sheets for less money per change.

Verdict: A low-effort film swap for older small Photon vats.

CHINDRAG ring FEP specs

173x115.4mm

The film area for the small Photon Mono/Ultra/D2 vats.

0.15mm FEP

Standard FEP gauge.

Integrated ring

Pre-tensioned; no cutting or ring disassembly.

Over 95% transmittance

Little UV loss through the film.

204°C long-term rating

Heat resistance of the FEP, far above vat temperatures.

What the integrated ring changes

On a loose-sheet film you cut, punch holes and set tension yourself. With CHINDRAG's one-piece design the film is already stretched in its ring, so the job is unscrew, swap and re-fit. That removes the most common re-filming mistakes: wrinkles and uneven tension that cause failed layers.

Swapping a CHINDRAG ring film on a Photon Mono 4K

Empty and clean the vat, remove the old film assembly as the package manual shows, set the new ring in place and tighten evenly. Leak-test with a dry paper towel under the vat before pouring resin back. With two films in the box, a punctured film is a short job rather than a wait for an order.

Before buying the CHINDRAG Photon ring FEP 2-pack

Checks.

Check before you buy

  • Your printer is a Photon Mono 2K, Mono 4K, Photon Ultra or D2
  • Your Photon is not a Mono 2 or Mono 4
  • A 173x115.4mm ring film matches your Photon vat

The product at a glance

CHINDRAG 2-Pack FEP Film for Mono/D2

Best for: Photon Mono 4K re-film

Dimensions
173x115.4x0.15mm
Maximum Temperature
204 ° C
Release Film Type
FEP
Film Thickness
0.15mm
Printing Technology
Resin
Resolution
4K

View on Amazon: CHINDRAG 2-Pack FEP Film for Mono/D2 Affiliate link

Two CHINDRAG 173x115.4x0.15mm FEP films pre-fitted in rings for the Photon Mono 2K/4K, Ultra and D2, over 95% transmittance, no cutting.

Pros

  • No cutting or tensioning
  • Clear fit list with exclusions
  • Two films per box

Cons

  • Not for Mono 2 or Mono 4
  • Install steps only in the box
  • Replaces the ring each time

Good fit if

  • You own a Photon Mono 4K or D2

Skip if

  • You own a Photon Mono 4

Verdict: A no-cut film swap for small Photon vats.

Specifications side by side

Spec CHINDRAG 2-Pack FEP Film for Mono/D2
Dimensions 173x115.4x0.15mm
Maximum Temperature 204 ° C
Release Film Type FEP
Film Thickness 0.15mm
Printing Technology Resin
Resolution 4K
Size for Mono/D2

Frequently asked questions

Does the CHINDRAG 173x115.4mm FEP fit the Photon Mono 4?

No, the listing excludes the Mono 2 and Mono 4.

Which printers does the CHINDRAG ring FEP 2-pack fit?

Photon Mono 2K, Mono 4K, Photon Ultra and Photon D2.

Do I need to cut the CHINDRAG integrated FEP?

No, the film comes fixed in its ring.

How many CHINDRAG ring films are in the box?

Two.

See also