Bambu Lab AMS 2 Pro Review (2026): Multi-Material With 65°C Drying
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The AMS 2 Pro is Bambu Lab's second-generation Automatic Material System: a sealed four-spool box that feeds filament to the printer for multi-color or multi-material jobs and, new on this version, dries filament with heated air at up to 65℃. During a drying cycle the spools turn on their own so moisture leaves evenly, and automatic venting lets damp air out before the box seals again. Bambu also moved feeding to a brushless servo motor that it says loads filament 60% faster, and RFID reads Bambu's own spools to set print and drying profiles without typing. Bambu lists X, P, A and H series printers as compatible, with one catch: X1, P1 and A-series owners need a separate switching adapter to power the drying function. On the H2D, up to four AMS 2 Pro units plus eight AMS HT can connect for up to 24 colors. Listed size is 17x12x13 inches at 8.82 pounds. What follows uses Bambu Lab's listing and published specs, without a hands-on test.
What stands out
- Four-spool multi-material feeder
- Active drying up to 65℃, spools rotate
- Brushless motor, 60% faster feed claimed
- RFID sync with Bambu filament
- X1/P1/A need an adapter for drying
Who it fits
Good fit for
Bambu printer owners who print PETG, TPU or nylon blends that pick up moisture and want feeding and drying in one sealed box, especially H2D users planning several units.
Who should skip it
A1 Mini owners happy with AMS lite and PLA, and X1/P1 owners who would not buy the extra adapter, since drying is the main reason to pay for this unit.
Verdict: Bambu's feeder with drying built in; check the adapter need for older printers.
AMS 2 Pro key features
65℃ active drying
Hot enough for PETG and many engineering filaments, per Bambu.
Rotating spools while drying
Even moisture removal across the whole spool.
Brushless servo feed
Bambu claims 60% faster loading.
RFID
Reads Bambu spools and applies settings automatically.
Up to 24 colors on H2D
With 4 AMS 2 Pro and 8 AMS HT connected.
Size and build of the AMS 2 Pro
The unit measures 17x12x13 inches and weighs 8.82 pounds by the listing, so it needs shelf space on top of or beside the printer. It holds four spools in an airtight chamber; Bambu says the sealed design keeps filament dry for weeks between drying runs. The listing does not give power draw or noise figures.
Day-to-day with the AMS 2 Pro
Load four spools, let RFID set the profiles for Bambu filament, and start a drying cycle on damp spools before a long print. Third-party filament works but needs its settings entered by hand. On X1, P1 or A-series printers the box feeds filament without the adapter, but drying needs that extra part, so budget for it.
Before buying the Bambu AMS 2 Pro
Checks.
Check before you buy
- Your printer is a Bambu X, P, A or H series model
- Your X1/P1/A setup will get the AMS 2 Pro drying adapter
- There is shelf space for a 17x12x13in AMS 2 Pro
The product at a glance
Bambu Lab AMS 2 Pro Material System
Best for: Bambu multi-material drying
- Maximum Temperature
- 65°C
- Color
- Black
- Dimensions
- 17 × 12 × 13 inches
- Weight
- 8.82 pounds
View on Amazon: Bambu Lab AMS 2 Pro Material System Affiliate link
Bambu Lab AMS 2 Pro: four-spool feeder with 65℃ rotating-spool drying, brushless feed, RFID sync; X1/P1/A drying needs an adapter.
Pros
- Drying and feeding in one sealed box
- RFID sets Bambu filament profiles
- Scales to 24 colors on H2D
Cons
- Adapter needed for drying on X1/P1/A
- Large and heavy unit
- No power or noise data listed
Good fit if
- You print moisture-sensitive filament on a Bambu
Skip if
- You print only PLA on an A1 Mini
Verdict: Bambu's drying multi-material unit.
Specifications side by side
| Spec | Bambu Lab AMS 2 Pro Material System |
|---|---|
| Maximum Temperature | 65°C |
| Color | Black |
| Dimensions | 17 × 12 × 13 inches |
| Weight | 8.82 pounds |
| Size | AMS 2 Pro |
| Model | AMS 2 PRO |
Frequently asked questions
Does the AMS 2 Pro dry filament on the P1S?
Yes, but X1, P1 and A-series printers need a switching adapter to power the drying.
How hot does the Bambu AMS 2 Pro dry filament?
Up to 65℃.
How many AMS 2 Pro units can an H2D run?
Up to four AMS 2 Pro plus eight AMS HT, for up to 24 colors.
Does the AMS 2 Pro read non-Bambu spools?
RFID detects Bambu filament; other brands need manual settings.
Featured in
See also
- vevor acrylic 3d printer enclosure ventilation review
- tyjan3d bambu a1 mini maintenance tool kit review
- tyjan3d 64 piece bambu p1s x1 tool kit pro review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- bambu lab p1s combo ams review
- ams fireplace elementi review
