TYJAN3D Bambu A1 Mini Maintenance Tool Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
TYJAN3D builds this kit around the Bambu Lab A1 Mini and A1 Mini Combo, mixing printer spares with general tools. The A1 Mini parts are the part you cannot get from a hardware store: 10 replacement nozzle wipers and 5 silicone socks for the hotend. Next come cleaning needles, a clog poke and brushes for nozzle care, and 1m of PTFE tube with a 2.5mm inner and 4mm outer diameter for 1.75mm filament, to replace worn tubing in the feed path. The finishing side covers scrapers, spatulas, tweezers, metal files and an engraving knife with spare blades for cleaning supports and edges. TYJAN3D does not state a total piece count, needle diameter or which wrench sizes are included, so check the photos if you need a specific size. The box is listed at 8.27x5.51x1.97 inches, small enough for a drawer beside the printer. Our take is assembled from TYJAN3D's listing and published specs, not from using the tools.
What stands out
- Made for A1 Mini and A1 Mini Combo
- 10 nozzle wipers, 5 silicone socks
- 1m PTFE, 2.5mm ID x 4mm OD
- Needles, clog poke, brushes
- Scrapers, files, knife and blades
Who it fits
Good fit for
New A1 Mini owners who want wear spares (wipers, socks, tubing) and basic finishing tools in one order.
Who should skip it
Owners of the full-size A1, P1 or X1 (wiper and socks differ), and anyone who already has a hobby tool set and needs only spares.
Verdict: A sensible first maintenance set for an A1 Mini, vague on sizes.
TYJAN3D A1 Mini kit contents
10 nozzle wipers
Spares for the A1 Mini's wiper as it wears.
5 silicone socks
Keep heat in and filament off the A1 Mini heater block.
1m PTFE tube
2.5mm ID x 4mm OD for 1.75mm filament.
Needles and clog poke
Clear a partial nozzle jam.
Files, knife, scrapers
Remove prints and clean up supports.
What the A1 Mini spares are for
The wiper and silicone sock are the parts on an A1 Mini that wear out with normal use: the wiper strip loses its edge after many prints, and the sock tears or gets coated in filament after a blob. With ten wipers and five socks you can change them as soon as they look worn instead of waiting for a print defect.
Using the TYJAN3D kit day to day
Swap the sock when it tears, replace the wiper when the nozzle comes out of a wipe still dirty, and cut PTFE to length when the old tube shows wear at the ends. The files, knife and tweezers handle support removal and edge cleanup; keep the knife blades covered, since they are sharp spares.
Before buying the TYJAN3D A1 Mini kit
Checks.
Check before you buy
- Your printer is an A1 Mini or A1 Mini Combo
- You want A1 Mini wear spares as well as hand tools
- You can work out A1 Mini wrench sizes from the photos
The product at a glance
TYJAN3D Bambu A1 Mini Maintenance Kit
Best for: A1 Mini upkeep
- Dimensions
- 8.27 × 5.51 × 1.97 inches
View on Amazon: TYJAN3D Bambu A1 Mini Maintenance Kit Affiliate link
TYJAN3D A1 Mini kit: 10 wipers, 5 silicone socks, 1m 2.5mm-ID PTFE, needles, clog poke, scrapers, files and a knife; no piece count given.
Pros
- A1 Mini wear spares included
- Covers cleaning and finishing
- Compact box
Cons
- A1 Mini only
- No piece count or wrench sizes
- Basic hand tools
Good fit if
- You own an A1 Mini and have no spares yet
Skip if
- You print on a full-size A1 or P1S
Verdict: A starter care kit for the A1 Mini.
Specifications side by side
| Spec | TYJAN3D Bambu A1 Mini Maintenance Kit |
|---|---|
| Dimensions | 8.27 × 5.51 × 1.97 inches |
Frequently asked questions
Does the TYJAN3D A1 Mini kit fit the full-size Bambu A1?
It is listed for the A1 Mini and A1 Mini Combo only.
What size is the PTFE tube in the TYJAN3D A1 Mini kit?
1m long, 2.5mm inner and 4mm outer diameter.
How many silicone socks come with the TYJAN3D A1 Mini set?
Five, plus ten nozzle wipers.
Does the TYJAN3D A1 Mini kit include finishing tools?
Yes: scrapers, spatulas, tweezers, metal files and an engraving knife with blades.
