VEVOR Acrylic 3D Printer Enclosure with Ventilation Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
VEVOR's model S0007 is a rigid printer enclosure rather than a fabric tent: three clear acrylic panels for viewing and three PVC foam boards for the other faces, with a ventilation system and an LED light. Inside space is listed as 23.6x23.6x31.5 inches, and VEVOR names the Bambu Lab A1, Ender-3 V2, Ender-3 V3, Ender-3 S1 Pro, Neptune 4 Pro and Kobra 2 Pro among fits, while telling buyers to measure first. That size suits bed-slinger printers, whose bed travels front to back and needs depth. The claims are the usual ones for an enclosure: steadier temperature to cut warping and cracking on ABS or ASA, a vent to move fumes and dust out after printing, less noise and less dust. At 33.7 pounds it is far heavier than a cloth tent and needs a solid table. VEVOR gives no fan airflow, duct length, filter type or temperature figure. These notes rest on VEVOR's listing and published specs; we did not assemble the box.
What stands out
- 23.6x23.6x31.5in rigid enclosure
- 3 acrylic panels + 3 PVC foam boards
- Ventilation system and LED light
- Lists A1, Ender-3 V3, Neptune 4 Pro, Kobra 2 Pro
- 33.7 lb; no fan or filter specs
Who it fits
Good fit for
Owners of a bed-slinger printer such as the Bambu A1 or Ender-3 V3 who print ABS/ASA, want fumes vented out, and prefer clear rigid walls to fabric.
Who should skip it
Owners of large CoreXY printers that may not fit, renters without a window for the vent hose, and anyone who needs a carbon filter rather than an exhaust.
Verdict: A sturdy, see-through box for mid-size bed-slingers, light on vent details.
VEVOR S0007 enclosure specs
23.6x23.6x31.5in
Room for most 220-250mm bed-slingers; measure bed travel.
3 acrylic panels
Clear faces for watching prints.
3 PVC foam boards
Opaque walls that help with noise and heat.
Ventilation system
Exhausts fumes and dust; no airflow figure given.
33.7 lb
Heavy; needs a stable surface.
How the VEVOR acrylic enclosure is built
Mixing acrylic and foam board gives three see-through faces and three insulated ones. Compared with an Oxford-cloth tent it holds its shape, keeps dust out better and is easier to wipe clean, at the cost of weight and assembly time. VEVOR does not say which faces are clear or where the vent outlet sits, so check the photos against where your printer's screen faces.
Printing inside the VEVOR S0007
Close the box for ABS, ASA or nylon to hold warmth around the part, and run the vent after printing to clear fumes. For PLA, leave the vent running or a panel open, since trapped heat can soften PLA in the hotend. Use the LED to watch long jobs through the acrylic without opening the box.
Before buying the VEVOR acrylic enclosure
Checks.
Check before you buy
- Your printer and its bed travel fit 23.6x23.6x31.5in
- A table can carry the 33.7 lb VEVOR box plus printer
- There is a window or duct for the VEVOR vent
The product at a glance
VEVOR Transparent Acrylic 3D Printer Enclosure
Best for: Bed-slinger ABS printing
- Primary Material
- Acrylic, PVC foam
- Finish
- Transparent
- Dimensions
- 23.6 × 23.6 × 31.5 inches
- Weight
- 33.7 pounds
View on Amazon: VEVOR Transparent Acrylic 3D Printer Enclosure Affiliate link
VEVOR S0007 rigid enclosure, 23.6x23.6x31.5in, with three acrylic panels, three PVC foam boards, vent system and LED; 33.7 lb.
Pros
- Rigid, clear viewing panels
- Vent and LED included
- Sized for common bed-slingers
Cons
- Heavy at 33.7 lb
- No fan, duct or filter specs
- Too small for big CoreXY machines
Good fit if
- You print ABS on a Bambu A1 or Ender-3 V3
Skip if
- You need a filtered, no-vent setup
Verdict: A rigid see-through enclosure for mid-size printers.
Specifications side by side
| Spec | VEVOR Transparent Acrylic 3D Printer Enclosure |
|---|---|
| Primary Material | Acrylic, PVC foam |
| Finish | Transparent |
| Dimensions | 23.6 × 23.6 × 31.5 inches |
| Weight | 33.7 pounds |
| Size | 23.6 x 23.6 x 31.5 inch |
| Color | Gray |
| Model | S0007 |
Frequently asked questions
Which printers fit the VEVOR S0007 enclosure?
VEVOR names the Bambu A1, Ender-3 V2/V3/S1 Pro, Neptune 4 Pro and Kobra 2 Pro, and says to measure.
How big is the VEVOR acrylic printer enclosure?
23.6x23.6x31.5 inches.
How heavy is the VEVOR S0007?
33.7 pounds.
Does the VEVOR acrylic enclosure have a carbon filter?
The listing describes a ventilation system but no filter.
Featured in
See also
- tyjan3d bambu a1 mini maintenance tool kit review
- tyjan3d 64 piece bambu p1s x1 tool kit pro review
- hysiprui creator 5 smooth textured pei plate review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- vevor acrylic freestanding bathtub review
- fungdo LCD 3d printer review
