As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Phrozen 15-Inch Build Plate for Sonic Mega 8K S Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

On the Sonic Mega 8K S, the build plate's surface is what holds a large, heavy resin print in place for hours. This is Phrozen's 15-inch replacement plate for that printer. Its title describes a frosted, laser-cut aluminum surface, which gives resin more texture to grip than a plain smooth plate, and four-point calibration for leveling. It is listed for the Sonic Mega 8K S only; Phrozen sells a separate 15-inch platform for the original Mega 8K, so check which printer you have before ordering. The page names no plate dimensions or surface roughness, and its 4.3 lb figure looks like a shipping weight rather than the plate itself. Our picture of the part comes from Phrozen's listing.

What stands out

  • Frosted laser-cut surface
  • All-aluminum plate
  • Four-point leveling

Who it fits

Good fit for

Sonic Mega 8K S owners replacing a scratched plate or adding a spare for long runs of large prints.

Who should skip it

Owners of the original Mega 8K, and anyone needing exact plate dimensions on paper first.

Verdict: The matching spare plate for the Mega 8K S, with the frosted finish the S uses.

Phrozen Mega 8K S plate specs

15-inch plate

For Sonic Mega 8K S.

Frosted laser-cut surface

Texture for resin grip.

All aluminum

Rigid, does not rust.

Four-point calibration

Level each corner.

4.3 lb listed

Likely shipping weight.

Original Mega 8K

Not listed for it.

Why the surface texture matters

Large resin prints pull hard on the plate each time a layer peels from the film. A frosted, laser-cut finish gives the first layers more surface to hold, which helps big flat bases stay attached. The trade-off is that very well stuck parts take more care to remove, so a plastic scraper is the safer tool.

Fitting a second plate

Swap the plate, level it on all four points against the screen and save the new Z home. Choose this plate if your printer is the Mega 8K S; choose Phrozen's BP15MEGAUS platform if you own the original Mega 8K.

Before you order

Checks for the Phrozen Mega 8K S plate.

Check before you buy

  • Your printer is the Sonic Mega 8K S
  • You will re-level after fitting it
  • You use a plastic scraper on textured plates
  • You want a spare for long print runs

The product at a glance

Phrozen 15-Inch Sonic Mega 8K S Build Plate

Best for: Sonic Mega 8K S owners

Primary Material
Aluminum
Build Surface Type
Frosted laser cut
Printing Technology
LCD
Resolution
8K
Dimensions
13.9 × 9.57 × 5.87 inches
Weight
4.3 pounds

View on Amazon: Phrozen 15-Inch Sonic Mega 8K S Build Plate Affiliate link

Phrozen 15-inch build plate for the Sonic Mega 8K S: all aluminum, frosted laser-cut surface, four-point leveling.

Pros

  • Frosted grip surface
  • Original fit for the 8K S
  • Simple four-point leveling

Cons

  • Wrong fit for the first Mega 8K
  • No plate dimensions listed

Good fit if

  • You own a Sonic Mega 8K S
  • Your plate is scratched or bent

Skip if

  • Your printer is the first Mega 8K

Verdict: The right spare plate for a Mega 8K S.

Specifications side by side

Spec Phrozen 15-Inch Sonic Mega 8K S Build Plate
Primary Material Aluminum
Build Surface Type Frosted laser cut
Printing Technology LCD
Resolution 8K
Dimensions 13.9 × 9.57 × 5.87 inches
Weight 4.3 pounds
Size Plate 15" - Mega8KS
Color Silver

Frequently asked questions

Does this Phrozen 15-inch plate fit the original Sonic Mega 8K?

No, the listing names the Mega 8K S only.

What surface does the Mega 8K S plate have?

A frosted, laser-cut aluminum surface.

How do I level the Phrozen Mega 8K S plate?

It uses four-point calibration.

How big is the Mega 8K S build plate?

Phrozen gives no plate dimensions beyond the 15-inch class.

Is the Phrozen 8K S plate aluminum?

Yes, aluminum throughout.

See also