ANYCUBIC Kobra 3 Camera (Klipper-Compatible) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC's Kobra 3 camera is a small add-on camera that streams to the Anycubic app, and this listing (code FBA-S010215-NEW-3) is the same S010215 camera sold under a newer item number. What makes it worth a look beyond ANYCUBIC printers is that the listing says it works with Klipper printers and a computer too, so a Kobra owner who later moves to Klipper firmware, or runs a second printer, is not stuck. The other personal touch is the frame: it is designed to be swapped, so you can print your own shell. Supported ANYCUBIC printers are the Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 3 Max Combo and the Kobra 2 series. ANYCUBIC calls the image ultra clear but gives no resolution or frame rate. This short listing has three bullets, so the facts here come from that text only; we had no unit to mount.
What stands out
- Streams to the Anycubic app
- Also lists Klipper and PC use
- Swappable, printable frame
- Fits Kobra 3 and Kobra 2 lines
Who it fits
Good fit for
Kobra 3 and Kobra 2 owners who want to watch prints remotely, especially those who run Klipper or might in future.
Who should skip it
Anyone who needs a stated resolution, night vision or time-lapse settings; this listing lists none of them.
Verdict: A simple remote-view camera for Kobra printers with a Klipper fallback; light on hard specs.
ANYCUBIC Kobra 3 camera, what is known
Anycubic app streaming
Check prints from anywhere.
Klipper and PC compatible
Not locked to Anycubic firmware.
Replaceable frame
Print a custom housing.
FBA-S010215-NEW-3
Newer item code for the S010215 camera.
No resolution stated
'Ultra clear' is the only image claim.
Built to be customized
The removable frame is a small but nice idea for a printer accessory: print one in your filament color or in a shape that fits your enclosure. The camera itself is plain black. ANYCUBIC frames the camera as a way to spot problems such as poor layer adhesion or filament jams before they waste material.
Using it with Klipper
On a Kobra 3 the camera ties into the Anycubic app. On a Klipper printer, a USB camera of this kind would normally be added to the web interface's camera settings; the listing confirms compatibility but gives no setup steps, so check ANYCUBIC's support for a guide before relying on it.
Before buying the ANYCUBIC Kobra 3 camera
Checks.
Check before you buy
- Your printer is a Kobra 3, Kobra 3 Max or Kobra 2 model, or runs Klipper
- You can live without a stated resolution on the ANYCUBIC camera
- You want to print your own frame for the Kobra camera
The product at a glance
ANYCUBIC Kobra 3 Monitoring Camera
Best for: Kobra owners using Klipper
- Features
- Built-in Camera
- Color
- Black
View on Amazon: ANYCUBIC Kobra 3 Monitoring Camera Affiliate link
ANYCUBIC Kobra 3 camera (FBA-S010215-NEW-3): an app-linked monitoring camera for Kobra 3 and Kobra 2 printers that also lists Klipper and PC support and a swappable frame.
Pros
- Klipper and PC support listed
- Custom frame option
- Covers Kobra 3 and 2 lines
Cons
- No resolution or frame rate
- Three-bullet listing
- No Klipper setup guide
Good fit if
- You might move a Kobra to Klipper
Skip if
- You need night vision or set specs
Verdict: A flexible little camera for Kobra and Klipper users.
Specifications side by side
| Spec | ANYCUBIC Kobra 3 Monitoring Camera |
|---|---|
| Features | Built-in Camera |
| Color | Black |
| Model | FBA-S010215-NEW-3 |
Frequently asked questions
Does the ANYCUBIC Kobra 3 camera work with Klipper?
The listing says it is compatible with Klipper printers and a computer.
Which ANYCUBIC printers fit this camera?
Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 3 Max Combo and the Kobra 2 series.
Can I change the ANYCUBIC camera frame?
Yes, the frame is replaceable and can be printed in your own design.
Is FBA-S010215-NEW-3 a different camera from S010215?
Its title and bullets match the S010215 camera; it is a newer item code.
Featured in
See also
- anycubic photon mono m7 resin vat review
- anycubic photon mono 4 resin tank review
- anycubic abs like resin 2 0 grey 1kg review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic kobra 3 max v2 3d printer review
- om system om 3 mirrorless camera review
