As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ANYCUBIC Photon Mono 4 / 4 Ultra Resin Tank Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This is a replacement resin tank, not resin or a printer: ANYCUBIC's vat for the Photon Mono 4 and Photon Mono 4 Ultra, shipped with an ACF release film already in place. The feature we like most is how the film is changed later: it is an integrated film that screws on, so you unscrew the bottom screws, line the new film up with the holes and tighten, with no cutting or drilling. That makes it easier to keep running than vats that need a sheet trimmed to fit. Like ANYCUBIC's other tanks, it has a maximum fill mark and an angled corner for pouring resin back into the bottle, and it works well as a second tank for quick color changes. The listing gives no material, capacity or film life, and says nothing about fast-mode limits either way. We wrote this from ANYCUBIC's listing, not from a tank in hand.

What stands out

  • Fits Photon Mono 4 and Mono 4 Ultra
  • ACF film pre-installed
  • Screw-on film, no cutting
  • Max mark and angled pour corner

Who it fits

Good fit for

Photon Mono 4 and Mono 4 Ultra owners who want a spare tank for a second resin, or a fresh vat after a damaged one.

Who should skip it

Owners of other Photon models; this tank is listed for the Mono 4 series only.

Verdict: An easy-to-maintain spare tank for the Mono 4 series; light on figures.

ANYCUBIC Mono 4 resin tank, at a glance

Mono 4 / Mono 4 Ultra fit

The only printers ANYCUBIC lists.

ACF film pre-installed

Ready to print on arrival.

Screw-on replacement film

Change the film without cutting or drilling.

Max fill mark

Guards against overflow.

Angled pour corner

Cleaner resin return to the bottle.

Easy film changes

Release films wear out and puncture, so the film is the part of a vat you replace most. ANYCUBIC's Mono 4 tank uses a pre-shaped film that aligns to the screw holes, which keeps the job to a screwdriver and a few minutes. Keep a spare Mono 4 film on hand if you print a lot.

Using a second Mono 4 tank

Keep one tank for your everyday grey and one for clear or specialty resin, and swap them rather than cleaning between jobs. Stay under the fill mark and pour back through the angled corner. Store a filled tank covered and away from light.

Before buying the ANYCUBIC Mono 4 tank

Checks.

Check before you buy

  • Your printer is a Photon Mono 4 or Photon Mono 4 Ultra
  • You want a spare ANYCUBIC Mono 4 tank for a second resin
  • You can do without a capacity figure for the Mono 4 tank

The product at a glance

ANYCUBIC Photon Mono 4 Resin Tank with ACF Film

Best for: Mono 4 series upkeep

Release Film Type
ACF
Printing Technology
Resin

View on Amazon: ANYCUBIC Photon Mono 4 Resin Tank with ACF Film Affiliate link

ANYCUBIC Photon Mono 4 / 4 Ultra resin tank: a spare vat with ACF film fitted, a screw-on film system that needs no cutting, a fill mark and a pour corner.

Pros

  • Tool-light film changes
  • Film ready on arrival
  • Spare tank for color swaps

Cons

  • Mono 4 series only
  • No capacity or material listed
  • No film life data

Good fit if

  • You own a Mono 4 or Mono 4 Ultra

Skip if

  • You own another Photon model

Verdict: A sensible spare for Mono 4 owners.

Specifications side by side

Spec ANYCUBIC Photon Mono 4 Resin Tank with ACF Film
Release Film Type ACF
Printing Technology Resin

Frequently asked questions

Which printers fit this ANYCUBIC resin tank?

The Photon Mono 4 and Photon Mono 4 Ultra.

How do I change the film on the Mono 4 tank?

Unscrew the bottom screws, align the new film with the holes and tighten; no cutting or drilling.

Does the Mono 4 tank come with ACF film?

Yes, the ACF film is pre-installed.

What capacity is the ANYCUBIC Mono 4 resin tank?

ANYCUBIC does not state it; follow the max mark inside.

See also