ANYCUBIC Photon Mono M7 / M7 Pro Resin Vat Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is a spare resin vat, not a printer: ANYCUBIC's black metal tank for the 10.1-inch Photon Mono M7 and M7 Pro, sold with an ACF release film already fitted. The best reason to own one is fast color or resin changes: keep grey in one vat and clear or tough resin in the other, and swap tanks instead of draining and cleaning. The tank has a maximum fill mark and an angled pouring corner to get leftover resin back into the bottle without drips. One line in the listing deserves attention before buying: ANYCUBIC says the pre-installed ACF film does not support fast printing, so if you rely on the M7 Pro's high-speed mode, expect to print at normal speed in this vat or fit a film that supports it. Capacity in milliliters and film thickness are not given. Our view rests on ANYCUBIC's short listing; we did not fit the vat.
What stands out
- Made for the 10.1-inch M7 and M7 Pro
- ACF film pre-installed
- Max fill mark and angled pour corner
- Spare tank for quick resin swaps
Who it fits
Good fit for
M7 and M7 Pro owners who switch between resins or colors and want a second ready-to-go tank.
Who should skip it
Users who print mostly in fast mode; ANYCUBIC says this vat's ACF film does not support it.
Verdict: A handy second vat for resin swaps on the M7 line, at normal speeds.
ANYCUBIC M7 vat, key facts
10.1-inch metal tank
Matches the M7 and M7 Pro screen size.
ACF film fitted
Ready to print out of the box.
No fast-mode support
Stated by ANYCUBIC for the fitted film.
Max fill mark
Helps avoid overflow during printing.
Angled pour corner
Less spillage when returning resin.
A spare vat for resin swaps
A second vat removes the slowest part of changing resin: emptying, filtering and cleaning the tank. With two, you lift one out with its resin still inside, cover it, and drop in the other. The fitted ACF film saves the fiddly film installation, though the listing does not say how many prints it lasts.
Using the M7 vat
Fill no higher than the marked maximum, and pour back through the angled corner after printing. Since the fitted film is not rated for fast printing, select the normal print mode when this vat is in. Cover a vat stored with resin to keep light and dust out.
Before buying the ANYCUBIC M7 vat
Checks.
Check before you buy
- Your resin printer is an ANYCUBIC M7 or M7 Pro
- You print in normal mode when using this ANYCUBIC vat
- You want a second M7 tank for a different resin
The product at a glance
ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat
Best for: Resin swaps on the M7 line
- Primary Material
- Metal
- Release Film Type
- ACF
- Printing Technology
- Resin
View on Amazon: ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat Affiliate link
ANYCUBIC Photon Mono M7 / M7 Pro resin vat: a 10.1-inch metal spare tank with ACF film fitted, a fill mark and an angled pour corner; not for fast mode.
Pros
- Quick resin or color swaps
- Film already installed
- Drip-reducing pour corner
Cons
- Fitted ACF not for fast printing
- No capacity figure
- No film life data
Good fit if
- You swap resins often on an M7
Skip if
- You print in fast mode most of the time
Verdict: A useful spare vat for normal-speed M7 printing.
Specifications side by side
| Spec | ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat |
|---|---|
| Primary Material | Metal |
| Release Film Type | ACF |
| Printing Technology | Resin |
Frequently asked questions
Does the ANYCUBIC M7 vat fit the M7 Pro?
Yes, ANYCUBIC lists it for the Photon Mono M7 and M7 Pro.
Can I use fast printing with this ANYCUBIC vat?
ANYCUBIC says the pre-installed ACF film does not support fast printing.
Does the M7 resin vat come with film?
Yes, an ACF film is already installed.
How much resin does the M7 vat hold?
The listing gives no capacity, only a max fill mark on the tank.
See also
- anycubic photon mono 4 resin tank review
- anycubic abs like resin 2 0 grey 1kg review
- elegoo abs like 3 0 pro black 2000g resin review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic photon mono m7 pro review
- venluna 10 1 inch 4k touch review
