YOUSU Glow in the Dark PLA 4x250g Pack Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The YOUSU Glow in the Dark PLA pack is a sampler: four 250g spools of 1.75mm glow PLA that glow green, blue, purple and rainbow, 1kg in total. It is the pick for anyone who wants to try several glow colors on small prints (ornaments, glow sticks, kids' figurines) before committing to a full kilo of one. YOUSU says the glow gets stronger after about 30 minutes under sunlight or UV light, and that brighter light gives a brighter result. The spools are small, so on a Bambu AMS or a similar multi-color unit you need to print a 250g spool adapter first, as the listing itself points out. Two details conflict: the title gives ±0.03mm tolerance while a bullet says ±0.02mm. No nozzle or bed temperature appears anywhere. This look at the pack uses YOUSU's own listing and specs only.
What stands out
- Four 250g glow PLA spools, 1kg total
- Glow colors: green, blue, purple, rainbow
- Stronger glow after ~30 min of sun or UV
- Needs a printed adapter for AMS-type units
- Tolerance listed as both ±0.03 and ±0.02mm
Who it fits
Good fit for
Makers who want to sample four glow colors for Halloween, Christmas and kids' gifts without buying four full spools.
Who should skip it
Anyone printing a large glow piece in one color (250g runs out fast), and AMS owners who do not want to print spool adapters.
Verdict: A low-commitment way to try four glow colors; plan around the small spools and missing temperatures.
YOUSU glow sampler in five points
4 x 250g
One spool each of green, blue, purple and rainbow glow.
30-minute charge
Sun or UV for about half an hour gives the strongest glow, YOUSU says.
Light source matters
Brighter light or UV charges prints to a brighter glow.
Spool adapter
Print a 250g adapter to run these in an AMS.
Vacuum packed
Sealed with desiccant against moisture and dust.
What the rainbow spool adds
Three of the spools are single glow colors; the fourth is a rainbow glow, which YOUSU lists without saying how the colors change along the strand. Phosphorescent PLA stores light and fades after the source is removed, so solid, thick-walled prints glow longer than thin shells. A 250g spool covers a handful of ornaments or a set of small figures, not a large lamp shade.
Printing the YOUSU glow spools
YOUSU gives no temperature window, so start from a standard PLA profile and print a small charge test in each color. Glow additives are abrasive in general; YOUSU does not mention nozzle wear, but a hardened nozzle is a safe choice for heavy use. Keep unused spools sealed, since small rolls are easy to leave out and pick up moisture.
Before buying the YOUSU glow 4-pack
Checks for this sampler.
Check before you buy
- You want four YOUSU glow colors rather than one full kilo
- Your YOUSU glow prints are small enough for 250g spools
- You can print an adapter if the YOUSU spools go in an AMS
- You have sunlight or UV to charge YOUSU glow prints
The product at a glance
Yousu Glow in the Dark Multicolor PLA Bundle 4x250g
Best for: Glow sampler
- Material Type
- PLA
- Filament Diameter
- 1.75 mm
- Net Weight
- 250g x 4
- Dimensional Accuracy
- +/- 0.03 mm
- Surface Finish
- Glow in the Dark
- Color Printing
- Multi-Color
View on Amazon: Yousu Glow in the Dark Multicolor PLA Bundle 4x250g Affiliate link
YOUSU Glow in the Dark PLA, 4 x 250g (green, blue, purple, rainbow glow): charge 30 min in sun or UV, AMS needs an adapter, no temperatures listed.
Pros
- Four glow colors to try
- Vacuum sealed with desiccant
- Good size for small gifts and decor
Cons
- 250g each runs out fast
- AMS needs a printed adapter
- Tolerance stated two ways
Good fit if
- You want to sample YOUSU glow colors
Skip if
- You need 1kg of one YOUSU glow color
Verdict: A glow color sampler for small prints.
Specifications side by side
| Spec | Yousu Glow in the Dark Multicolor PLA Bundle 4x250g |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75 mm |
| Net Weight | 250g x 4 |
| Dimensional Accuracy | +/- 0.03 mm |
| Surface Finish | Glow in the Dark |
| Color Printing | Multi-Color |
| Compatible Material | PLA |
| Features | Glow in the Dark |
| Color Effect | Rainbow |
| Dimensions | 9.84 × 8.66 × 2.95 inches |
| Weight | 2.2 pounds |
| Size | A-Glow in dark PLA |
| Color | A1 Blue/Green/Purple/Rainbow |
| Model | YS-Glowdark-1.75MM-4X250G-PACK A |
Frequently asked questions
Which glow colors are in the YOUSU pack?
Green, blue, purple and rainbow, one 250g spool of each.
How long should I charge YOUSU glow PLA prints?
YOUSU says the glow is stronger after about 30 minutes under sunlight or UV light.
Do YOUSU 250g glow spools fit a Bambu AMS?
Only with a 250g spool adapter, which the listing suggests printing yourself.
What tolerance does YOUSU glow PLA have?
The title says ±0.03mm and a bullet says ±0.02mm; the listing does not settle it.
What temperature should I print YOUSU glow PLA at?
YOUSU lists none, so start with normal PLA settings and test.
Featured in
See also
- yousu tpu 95a black filament review
- flashforge silk tri color pla review
- giantarm silk pla dark green filament review
- yousu 3d printer filament review
- yousu silk pla filament 1 75mm review
- Yousu PETG 1.75mm 5kg Filament Review: Specs, Pros and Cons
- Yousu PEBA-Like 95A Super TPU Review: Who It Fits and Who Should Skip It
- YOUSU Transparent PETG Filament (1kg) Review (2026)
- thome glow signature review
- comfort glow space heater review
