As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

GIANTARM Silk PLA Filament (Dark Green, 1kg) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

GIANTARM Silk PLA in dark green is a 1kg spool of 1.75mm silk filament, and unlike many silk listings it gives settings: 190-215°C at the nozzle and 40-60°C on the bed. A deep green silk suits plant pots, leaf and dragon models, holiday decor and anything meant to look like green enamel or jade, without painting. GIANTARM says the filament is dried for 24 hours before it is vacuum sealed with desiccant in a resealable nylon bag, and gives the spool size: 7.8in across, 2.5in wide, with a 2.30in hub hole, which helps check fit on a spool holder or dryer. Two slips on the page: the title claims ±0.02mm while a bullet says ±0.03mm, and that bullet calls the filament "Burlywood", copied from another GIANTARM color. Everything here comes from GIANTARM's listing and specs, not from our own prints.

What stands out

  • Silk PLA, dark green, 1kg, 1.75mm
  • Nozzle 190-215°C, bed 40-60°C
  • Dried 24 h, vacuum sealed in resealable bag
  • Spool 7.8in x 2.5in, 2.30in hub
  • Tolerance stated as ±0.02 and ±0.03mm

Who it fits

Good fit for

Makers of green decor (planters, foliage, dragons, Christmas pieces) who want a silk shine plus printed temperatures to start from.

Who should skip it

Anyone who needs one confirmed tolerance figure, and buyers wanting a matte or opaque green rather than a shiny one.

Verdict: A dark green silk spool with useful settings and spool sizes; ignore the copied Burlywood line.

GIANTARM dark green silk: the numbers

190-215°C

GIANTARM's nozzle range for this silk PLA.

40-60°C bed

A typical PLA bed window.

24 h drying

Dried before the vacuum seal, then packed with desiccant.

2.30in hub

Hub hole size for spool holders and dryers.

±0.02 or ±0.03mm

Title and bullet disagree on tolerance.

How dark green silk reads on a print

Silk PLA catches light along each layer, so a dark green shows a bright sheen on curves and a deeper tone in recesses. That suits organic shapes like leaves, scales and vases, where highlight and shadow add depth. Flat, wide faces show less of the effect. GIANTARM says the finish needs no polishing, and the color is described as consistent without traces of other colors.

Printing GIANTARM silk PLA in green

Start in the middle of the listed 190-215°C window and adjust: silk usually looks glossier a bit hotter and slower on outer walls. Keep the bed within 40-60°C. GIANTARM asks you to return the spool to its resealable bag after each use, which matters more for silk, as damp silk loses its shine and strings.

Before buying GIANTARM dark green silk

Checks for this spool.

Check before you buy

  • A shiny dark green suits your GIANTARM silk prints
  • Your holder fits GIANTARM's 2.30in hub hole
  • You can print GIANTARM silk at 190-215°C
  • You are fine with GIANTARM's unclear tolerance figure

The product at a glance

GIANTARM 1kg Silk PLA Filament

Best for: Green silk decor

Material Type
PLA
Filament Diameter
1.75mm
Net Weight
1kg
Dimensional Accuracy
+/- 0.02mm
Surface Finish
Silk
Printing Technology
FDM

View on Amazon: GIANTARM 1kg Silk PLA Filament Affiliate link

GIANTARM Silk PLA, dark green 1kg: 190-215°C nozzle, 40-60°C bed, dried 24 h, 2.30in hub; tolerance stated two ways.

Pros

  • Printed temperature range
  • Spool sizes given
  • Resealable bag

Cons

  • Tolerance conflict
  • Bullet copied from a Burlywood listing
  • Silk shine weak on flat faces

Good fit if

  • You print green silk decor with GIANTARM settings

Skip if

  • You need a matte GIANTARM green

Verdict: A dark green silk with real settings.

Specifications side by side

Spec GIANTARM 1kg Silk PLA Filament
Material Type PLA
Filament Diameter 1.75mm
Net Weight 1kg
Dimensional Accuracy +/- 0.02mm
Surface Finish Silk
Printing Technology FDM
Compatible Material PLA
Size 1KG
Finish Silk
Weight 2.2 pounds
Color Silk Dark Green
Model 700-001-1228

Frequently asked questions

What temperature should I print GIANTARM silk dark green at?

GIANTARM lists 190-215°C for the nozzle and 40-60°C for the bed.

What is the tolerance of GIANTARM dark green silk PLA?

The title says ±0.02mm, a bullet says ±0.03mm; the page does not settle it.

What size is the GIANTARM silk spool?

7.8in diameter, 2.5in wide, with a 2.30in hub hole.

Why does the GIANTARM green silk page mention Burlywood?

That bullet appears copied from another GIANTARM color; the listing's color field says Silk Dark Green.

Does GIANTARM dark green silk need polishing?

GIANTARM says no: the silk shine comes straight off the printer.

See also