YOUSU TPU 95A Filament (Black, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
YOUSU TPU 95A in black is a 1kg spool of 1.75mm flexible filament for parts that need to bend, grip or soak up knocks. Black is the practical color for this job: phone cases, bike and motorcycle bumpers, handlebar grips, shoe soles and feet for equipment get scuffed and dirty, and black hides it. Shore 95A sits in the firm-flexible middle of TPU, so prints flex without tearing yet still feed on most printers. YOUSU says it performs best on direct drive machines and also works on well-adjusted Bowden setups, naming Bambu Lab, Creality Ender-3/K1, Anycubic Kobra, ELEGOO Neptune, Flashforge and Prusa printers. Spools ship vacuum sealed with desiccant, and YOUSU suggests 7 hours at 50°C to dry an opened roll. It does not list nozzle or bed temperatures or a speed range. Our notes come from YOUSU's listing, not from printing a spool.
What stands out
- 95A flexible TPU, black, 1kg, 1.75mm
- Best on direct drive; tuned Bowden can work
- Dry opened spools 7 h at 50°C
- Vacuum sealed with desiccant
- No temperature or speed figures
Who it fits
Good fit for
Makers of hard-wearing flexible parts in black (cases, grips, bumpers, soles, gaskets) with a direct drive printer.
Who should skip it
Owners of loose Bowden setups who do not want to tune retraction, and anyone who needs a softer TPU than 95A.
Verdict: A plain black 95A TPU for functional flexible parts; bring your own temperature and speed settings.
YOUSU black TPU: key numbers
Shore 95A
Firm-flexible: bends and grips, but holds its shape.
1kg black
A color that hides wear on cases, grips and bumpers.
Direct drive first
YOUSU's own advice; Bowden works only when well adjusted.
50°C for 7 hours
YOUSU's drying advice for an opened spool.
1-year shelf life
Sealed spools keep quality for a year, YOUSU says.
What black 95A TPU is good for
At 95A the material is stiff enough for phone cases, cable strain reliefs, drone bumpers and tool grips, and soft enough to stretch over an edge or damp vibration. YOUSU also lists outdoor uses, soles, wearables and car dashboard parts. For anything that touches skin or food, the listing gives no certification, so keep it to mechanical and protective parts.
Printing YOUSU TPU on a direct drive or Bowden printer
TPU likes slow, steady feeding. With no YOUSU speed range, start well below your PLA speed and raise it once walls come out solid. On a Bowden printer, cut retraction short and keep the tube path tight, as YOUSU's "well-tuned Bowden" note implies. TPU picks up moisture quickly, so dry the spool at the listed 50°C for 7 hours before a long print if it has been open.
Before buying YOUSU black TPU 95A
Checks for this flexible spool.
Check before you buy
- Your printer has direct drive or a well-tuned Bowden for YOUSU TPU
- 95A suits the flex you need from YOUSU black TPU
- You can dry YOUSU TPU at 50°C before printing
- You are fine finding YOUSU TPU temperatures by testing
The product at a glance
Yousu TPU 95A 1.75mm Flexible Filament
Best for: Flexible wear parts
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Shore Hardness
- 95A
- Printing Technology
- FDM
- Application
- Functional Parts
View on Amazon: Yousu TPU 95A 1.75mm Flexible Filament Affiliate link
YOUSU TPU 95A black 1kg: firm-flexible TPU for cases, grips and bumpers, direct drive preferred, dry 50°C for 7 h, no print temperatures listed.
Pros
- Black hides scuffs on worn parts
- Works on tuned Bowden too
- Drying advice given
Cons
- No temperature or speed range
- 95A is not soft enough for very squishy parts
- No skin or food certification
Good fit if
- You print black YOUSU TPU grips or bumpers
Skip if
- You need a softer TPU than YOUSU 95A
Verdict: A practical black TPU for wear parts.
Specifications side by side
| Spec | Yousu TPU 95A 1.75mm Flexible Filament |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Application | Functional Parts |
| Weight | 2.2 pounds |
| Size | E- TPU-95A |
| Color | E1-tpu Black 1kg |
| Model | YS-TPU-Black-1.75-1.0 |
Frequently asked questions
What hardness is YOUSU black TPU?
Shore 95A, the common firm-flexible grade.
Can I print YOUSU TPU 95A on a Bowden printer?
YOUSU says it works on well-adjusted Bowden machines but performs best on direct drive.
How do I dry YOUSU black TPU?
YOUSU suggests 50°C for 7 hours for an opened spool.
What temperature does YOUSU TPU 95A need?
No range is listed; begin from a TPU 95A profile in your slicer.
Which printers does YOUSU name for its TPU?
Bambu Lab, Creality Ender-3 and K1, Anycubic Kobra, ELEGOO Neptune, Flashforge and Prusa models.
See also
- flashforge silk tri color pla review
- giantarm silk pla dark green filament review
- stronghero3d pla rainbow silk filament review
- yousu 3d printer filament review
- yousu silk pla filament 1 75mm review
- Yousu PETG 1.75mm 5kg Filament Review: Specs, Pros and Cons
- Yousu PEBA-Like 95A Super TPU Review: Who It Fits and Who Should Skip It
- YOUSU Transparent PETG Filament (1kg) Review (2026)
- geeetech 3d printer kids review
- hyako s1 3d flexible back review
