YOUSU Transparent PETG Filament (1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
YOUSU's Transparent PETG is a 1kg spool of clear PETG, and its use is light: lampshades, display boxes, light diffusers and glowing crafts, plus outdoor parts that need PETG's toughness. YOUSU claims high light transmittance with no haze or bubbles; real clarity still depends on settings, since printed PETG turns frosted when layers trap air. YOUSU gives full guidance: 220-240°C at the nozzle, a 60-70°C bed and 100-300mm/s, and it suggests drying the spool at 60°C for 5-8 hours first, which matters for clear filament because moisture shows as bubbles. Tolerance is ±0.02mm. PETG resists water, UV and heat better than PLA, so YOUSU names flower pots, bird feeders and car parts as uses. It also claims the prints will not yellow with age. This summary is drawn from YOUSU's listing and its settings, not from a print run.
What stands out
- Clear PETG, 1kg 1.75mm
- ±0.02mm
- 220-240°C, 60-70°C bed
- 100-300mm/s
- Dry 60°C for 5-8h first
Who it fits
Good fit for
Makers of lampshades, light boxes and display cases, and anyone wanting clear, tough outdoor parts.
Who should skip it
Buyers expecting glass-clear prints with no tuning; printed PETG usually comes out frosted unless walls are thick and slow.
Verdict: A clear, tough PETG with full settings, best for light-diffusing parts.
YOUSU transparent PETG specs
Transparent
Light passes through for lamps and displays.
220-240°C / 60-70°C bed
YOUSU's settings.
100-300mm/s
Mid to fast speed range.
Dry 60°C, 5-8h
Moisture causes bubbles in clear prints.
UV, water, heat resistant
Suited to outdoor parts.
Where YOUSU clear PETG fits
YOUSU aims it at structural and decorative parts: mechanical pieces and jigs that need impact resistance, and lampshades or display boxes where light should pass. It claims low warp and strong layer bonding for large clear models, and an anti-tangle wind.
Getting clearer prints from YOUSU PETG
Dry the spool as YOUSU suggests before the first print. For the clearest results, slow down within the 100-300mm/s range, raise flow slightly so layers fuse, and print solid or single-wall parts. PETG sticks firmly to smooth PEI, so use a release layer such as glue stick.
Before buying YOUSU transparent PETG
Checks.
Check before you buy
- You can dry the YOUSU spool at 60°C
- Your YOUSU PETG parts are lamps, displays or outdoor pieces
- You accept a frosted look from YOUSU PETG at speed
The product at a glance
Yousu Transparent PETG Filament 1.75mm
Best for: Clear PETG parts
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 300 mm/s
- Printing Technology
- FDM
- Finish
- Transparent
View on Amazon: Yousu Transparent PETG Filament 1.75mm Affiliate link
YOUSU transparent PETG 1kg: clear, ±0.02mm, 220-240°C, 60-70°C bed, 100-300mm/s, dry at 60°C for 5-8h; UV and water resistant.
Pros
- Clear for light-diffusing parts
- Full settings plus drying
- Tough and outdoor-ready
Cons
- Needs drying first
- Frosted at high speed
- Sticks hard to smooth PEI
Good fit if
- You print lampshades or display boxes
Skip if
- You expect glass-clear YOUSU prints without tuning
Verdict: A clear PETG for lamps, displays and outdoor parts.
Specifications side by side
| Spec | Yousu Transparent PETG Filament 1.75mm |
|---|---|
| Material Type | PETG |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 300 mm/s |
| Printing Technology | FDM |
| Compatible Material | PETG |
| Finish | Transparent |
| Dimensional Accuracy | +/- 0.02mm |
| Weight | 2.2 pounds |
| Size | PETG |
| Color | 03-transparent-1kg |
Frequently asked questions
What temperature does YOUSU transparent PETG need?
220-240°C at the nozzle and a 60-70°C bed.
Should YOUSU clear PETG be dried?
Yes, YOUSU suggests 60°C for 5-8 hours.
Is YOUSU transparent PETG good for lampshades?
YOUSU names lampshades, display boxes and luminous crafts.
What tolerance does YOUSU state for its clear PETG?
±0.02mm.
See also
- siraya tech fibreheart ppa filament review
- siraya tech fast mecha abs like resin review
- flashforge asa filament 1 75mm natural review
- yousu 3d printer filament review
- yousu silk pla filament 1 75mm review
- Yousu PETG 1.75mm 5kg Filament Review: Specs, Pros and Cons
- Yousu PEBA-Like 95A Super TPU Review: Who It Fits and Who Should Skip It
- YOUSU Glow in the Dark PLA 4x250g Pack Review
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
