YOOPAI Vented Resin 3D Printer Enclosure Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is not a printer: it is a $54.99 tent that goes over one LCD resin printer to contain fumes. YOOPAI fits a carbon filter sheet, an exhaust fan and an expandable hose so you can push air out of a window, and the six closed sides keep dust off the vat. A large clear PVC front lets you watch the build plate without unzipping. The interior is 28×18×17in, so any resin machine smaller than that should fit. Insulation is said to hold a steadier temperature, which helps resin flow in a cool room. The listing does not say how the fan is powered or how loud it is. Details come from the product page.
What stands out
- Carbon filter plus exhaust hose
- Clear front panel for watching prints
- Closed on all six sides
- Room for most single resin machines
Who it fits
Good fit for
Resin hobbyists printing in a spare room or apartment who want to vent fumes outdoors and keep dust off the vat, without building a cabinet.
Who should skip it
Skip it if you run two printers side by side, own a large-format machine near 28in tall, or need to know fan power and noise up front.
Verdict: A simple, affordable way to vent and protect one resin printer.
Enclosure specs in plain terms
28×18×17in single space
Measure your printer with the lid raised; it must clear all three sides.
Carbon filter sheet + exhaust fan
The filter soaks up some odour; the fan and hose move the rest outside.
Transparent PVC window
Check progress without opening the tent and releasing fumes.
Insulated walls
Helps keep resin warmer and more consistent during cold months.
Build and fit
The tent uses lightweight PVC for the window and a fully closed six-sided body to stop resin splashes and dust. It weighs 4.6 pounds per the listing. The compatibility line mixes up brands, naming ELEGOO Photon Mono, Saturn, Mars and Halot series, while the title mentions Anycubic and ELEGOO; in practice Photon is Anycubic and Halot is Creality, so treat size, not brand, as the real test. The spec table lists 18in wide, 28in high and 17in long.
Living with it
Run the hose to a window or vent so the fan has somewhere to send air; the carbon sheet alone will not remove all odour. Keep gloves and IPA outside the tent to avoid knocking things over when you reach in. Since the listing gives no replacement schedule for the carbon sheet, swap it when smells return. Wipe the PVC window with a soft cloth to keep it clear.
Measure first
Size and ventilation route matter more than brand lists.
Check before you buy
- Printer plus open lid fits inside 28×18×17in
- A window or vent is close enough for the hose
- You have a power outlet for the fan
- One printer per tent is enough
The product at a glance
YOOPAI Ventilated Resin 3D Printer Enclosure
Best for: Venting one LCD resin printer at home
- Primary Material
- PVC
- Printing Technology
- Resin
- Color
- Black
- Dimensions
- 17 × 18 × 28 inches
- Weight
- 4.6 pounds
View on Amazon: YOOPAI Ventilated Resin 3D Printer Enclosure Affiliate link
Single-printer resin enclosure, 28×18×17in, with carbon filter sheet, exhaust fan, expandable hose, clear PVC front and insulated six-sided body, $54.99.
Pros
- Vents fumes outdoors via hose
- Window lets you watch without opening
- Keeps dust and splashes contained
Cons
- Fan power and noise unstated
- Brand compatibility list is muddled
- Fits only one printer
Good fit if
- You resin print in a living space
- You have a window for the exhaust hose
Skip if
- Your printer is taller than 28in with the lid up
- You want a two-printer tent
Verdict: Good-value fume tent for one resin machine.
Specifications side by side
| Spec | YOOPAI Ventilated Resin 3D Printer Enclosure |
|---|---|
| Primary Material | PVC |
| Printing Technology | Resin |
| Color | Black |
| Dimensions | 17 × 18 × 28 inches |
| Weight | 4.6 pounds |
| Size | Single Space |
| Model | Vent Resin Enclosure |
Frequently asked questions
Is this a resin 3D printer?
No. It is an enclosure that sits over an existing LCD resin printer.
Which printers fit?
Any resin printer smaller than 28×18×17in; the listing names Saturn, Mars, Photon Mono and Halot series.
Does it remove resin smell completely?
It combines a carbon filter with a fan and hose to vent outside; the listing gives no filtration rating.
How is the fan powered?
The listing does not say, so confirm the plug type and cable length after delivery.
Featured in
See also
- entina tina2c mini 3d printer review
- entina 4 color pla filament review
- entina mini 3d printers review
- yoopai dual resin printer enclosure review
- yoopai medium printer enclosure vent kit review
- YOOPAI Pro Resin 3D Printer Enclosure (L2) Review
- anycubic resin 3d printer review
- unxuey 50pcs 3d printer heatsink review
