TYJAN3D 64-Piece Bambu P1S/X1 Tool Kit Pro Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is the Pro version of TYJAN3D's tool kit for Bambu Lab's P1 and X1 printers, listed as 64 pieces and compatible with the P1S, P1P, X1, X1C and X1E. TYJAN3D also sells a smaller P1/X1 kit built around nozzle wipers, silicone socks and fastening tools; the Pro adds the clog-clearing and finishing side: cleaning needles, a long clog poke, nozzle brushes, PTFE tube, scrapers, metal files and cutters. Fastening tools are in both: Allen wrenches, screwdrivers, open-end and multi-function wrenches, and tweezers. Choose the Pro if you have no hobby tools yet and want one box for hotend care, jams and support cleanup; the smaller kit is enough if you only need the Bambu wear spares. TYJAN3D gives no count per item, no PTFE length or diameter, and no wrench sizes on this listing, so the 64 figure is the only quantity you can rely on. Our verdict comes from TYJAN3D's listing and published specs, with no hands-on use of the kit.
What stands out
- 64 pieces for P1S/P1P/X1/X1C/X1E
- Wipers and silicone socks for the hotend
- Needles, clog poke and brushes
- PTFE tube, scrapers, files, cutters
- No per-item counts or sizes
Who it fits
Good fit for
P1S, P1P or X1-series owners starting from scratch who want Bambu wear spares plus jam-clearing and finishing tools in one kit.
Who should skip it
A1 or A1 Mini owners (different parts), and P1/X1 owners who already own hand tools and need only wipers and socks.
Verdict: A broad one-box kit for Bambu P1/X1 printers, short on specifics.
TYJAN3D P1/X1 Pro kit contents
64 pieces
The only quantity the listing gives.
Wipers and silicone socks
Wear spares for the P1/X1 hotend area.
Needles and clog poke
Clear partial and full nozzle jams.
PTFE tube
Replace worn tubing; no length or ID listed.
Scrapers, files, cutters
Remove prints and trim supports.
What the Pro kit adds for P1/X1 owners
The difference from TYJAN3D's base P1/X1 kit is the jam and finishing tools. A clog poke long enough to reach through the hotend and fine needles let you clear a blocked nozzle without removing it, and the scrapers and files cover what happens after the print. If you print often with supports, those tools get more use than the spares.
Routine P1S care with the TYJAN3D Pro set
Brush the nozzle before a long print, change the silicone sock when it splits, and replace the wiper when it stops cleaning the tip. When the extruder clicks or under-extrudes, try the needles and clog poke before ordering a new hotend. Keep the cutters and files for support cleanup.
Before buying the TYJAN3D P1/X1 Pro kit
Checks.
Check before you buy
- Your printer is a Bambu P1S, P1P, X1, X1C or X1E
- You want TYJAN3D's finishing tools, not only P1/X1 spares
- You do not need exact PTFE or wrench sizes from the P1/X1 listing
The product at a glance
TYJAN3D 64-Piece P1S Printer Tool Kit
Best for: P1S and X1C upkeep
View on Amazon: TYJAN3D 64-Piece P1S Printer Tool Kit Affiliate link
TYJAN3D 64-piece Pro kit for Bambu P1S/P1P/X1/X1C/X1E: wipers, socks, clog poke, needles, PTFE, scrapers, files, cutters and wrenches.
Pros
- Spares plus jam and finishing tools
- Wide P1/X1 fit list
- One box for most upkeep
Cons
- No per-item counts
- No PTFE or wrench sizes
- Not for the A1 series
Good fit if
- You own a P1S or X1C and few tools
Skip if
- You need only replacement wipers and socks
Verdict: A complete starter tool box for Bambu P1/X1.
Frequently asked questions
Which Bambu printers does the TYJAN3D 64-piece kit fit?
The P1S, P1P, X1, X1C and X1E.
How is the TYJAN3D Pro kit different from the smaller P1/X1 kit?
The Pro adds needles, a clog poke, PTFE tube, scrapers, files and cutters.
Does the TYJAN3D P1S 64PCS kit fit the Bambu A1?
No, it is listed for the P1 and X1 series.
What PTFE size comes in the TYJAN3D P1/X1 Pro set?
The listing does not give the length or diameter.
Featured in
See also
- hysiprui creator 5 smooth textured pei plate review
- hemulac bambu lab p2s extruder gear kit review
- elegoo 8k standard resin space grey 2kg review
- tyjan3d 61 piece bambu a1 tool kit review
- tyjan3d bambu p1 x1 maintenance tool kit review
- TYJAN3D Bambu A1 Mini Maintenance Tool Kit Review (2026)
- bambu lab p1s enclosed 3d printer review
- unxuey 50pcs 3d printer heatsink review
