HysiPrui Flashforge Creator 5 Smooth/Textured PEI Plate Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
HysiPrui's black plate is a flexible spring steel sheet for the FLASHFORGE Creator 5 and Creator 5 Pro with a different PEI finish on each face: smooth on one side, textured on the other. That split is the reason to choose it over HysiPrui's gold sheet for the same printers, which is textured on both faces. Smooth PEI gives a flat, glossy underside on PLA and PETG and suits flat parts with a lot of contact area; textured PEI hides small first-layer marks, grips small footprints and releases PETG more easily. HysiPrui lists PLA, PETG, ABS and TPU, says no glue is needed, and says parts come off by flexing the cooled sheet. The page gives no plate dimensions, steel thickness, PEI coating thickness or maximum bed temperature, so the fit claim rests on the printer names alone. As a spare it also covers the day one face gets gouged: flip it and keep printing. Our assessment works from HysiPrui's listing and published specs alone; we did not print on this plate.
What stands out
- Smooth PEI one side, textured the other
- For Creator 5 and Creator 5 Pro
- PLA, PETG, ABS and TPU listed
- Flex the cooled sheet to release
- No size or temperature specs given
Who it fits
Good fit for
Creator 5 or Creator 5 Pro owners who want both a glossy-bottom surface and a textured one on a single spare sheet.
Who should skip it
Owners of the AD5M, AD5X or other FLASHFORGE models, and buyers who want a documented size and temperature limit before ordering.
Verdict: A practical two-finish spare for the Creator 5 family, thin on specs.
HysiPrui Creator 5 plate details
Smooth PEI side
Glossy, flat bottoms; best for PLA on clean plates.
Textured PEI side
Grips small parts and hides first-layer marks.
Spring steel
Flex to release once cool.
Creator 5 / 5 Pro
HysiPrui names no other FLASHFORGE model for this sheet.
PLA, PETG, ABS, TPU
The filament range HysiPrui gives.
Choosing a side on the Creator 5
Use the smooth face for flat parts where the bottom shows, such as panels, signs and lids, and keep it very clean, since smooth PEI loses grip from fingerprints faster. Use the textured face for PETG, which can bond too strongly to smooth PEI, and for small or tall parts that need more grip. With four toolheads on the Creator 5, a multi-color print that spans the bed benefits from whichever side gives the most even first layer.
Living with the HysiPrui PEI sheet
Place it on the Creator 5 magnetic bed, print, then let it cool and bend it to pop parts off; no glue is needed, per HysiPrui. Wipe with isopropyl alcohol between prints and wash with dish soap when adhesion fades. If one face gets a gouge, flip the sheet and carry on.
Before buying the HysiPrui Creator 5 PEI sheet
Checks.
Check before you buy
- You print on a Creator 5 or Creator 5 Pro and want a spare
- You want one smooth and one textured face, not two textured
- You accept the HysiPrui listing has no size or temperature figure
The product at a glance
HysiPrui Creator 5 Smooth and Textured Black PEI Sheet
Best for: Creator 5 glossy bottoms
- Primary Material
- Spring steel
- Build Surface Type
- Textured and smooth PEI
- Color
- Black
- Build Plate Material
- PEI, Spring Steel
View on Amazon: HysiPrui Creator 5 Smooth and Textured Black PEI Sheet Affiliate link
HysiPrui black spring steel plate for the Creator 5/5 Pro with smooth PEI on one face and textured PEI on the other; no size or temp limit listed.
Pros
- Two finishes on one sheet
- Flex release, no glue
- Flip if one face is damaged
Cons
- No dimensions or thickness
- No temperature rating
- Creator 5 family only
Good fit if
- You want glossy bottoms on Creator 5 prints
Skip if
- You print on an AD5M or AD5X
Verdict: A smooth-plus-textured spare for the Creator 5.
Specifications side by side
| Spec | HysiPrui Creator 5 Smooth and Textured Black PEI Sheet |
|---|---|
| Primary Material | Spring steel |
| Build Surface Type | Textured and smooth PEI |
| Color | Black |
| Build Plate Material | PEI, Spring Steel |
| Surface Finish | Smooth, Textured |
| Size | For Creator 5/Creator 5 Pro |
Frequently asked questions
Does the HysiPrui smooth/textured plate fit the Creator 5 Pro?
Yes, the listing names the Creator 5 and Creator 5 Pro.
Which filaments does HysiPrui list for the Creator 5 PEI sheet?
PLA, PETG, ABS and TPU.
Do I need glue on the HysiPrui Creator 5 sheet?
HysiPrui says no glue is needed.
Does the black HysiPrui listing give plate dimensions?
No, it names the printers but states no size.
See also
- hemulac bambu lab p2s extruder gear kit review
- elegoo 8k standard resin space grey 2kg review
- sunlu fast curing standard resin grey 3kg review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- flashforge creator 5 multi toolhead 3d printer review
- insta360 x4 creator bundle review
