TYJAN3D Bambu P1/X1 Maintenance Tool Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
TYJAN3D's P1/X1 kit is the smaller sibling of its A1 set, focused on the hotend area of the Bambu Lab P1S, P1P, X1, X1C and X1E. It holds nozzle wiper parts, replacement silicone brushes for the wiper, silicone socks for the heat block, plus Allen keys, screwdrivers and open-end wrenches to fit them. The silicone brush cleans filament off the nozzle during printing, which cuts color bleed on multi-color jobs, and fresh socks keep the block clean and hold its temperature steady. What the page does not say is how many of each part are included, so you cannot tell how many changes it covers. There are no scrapers, needles or finishing tools, unlike TYJAN3D's 61-piece A1 kit. As a cheap restock of the wear parts a P1 or X1 goes through, it does the job. Our summary uses TYJAN3D's listing.
What stands out
- Wiper parts and silicone brushes
- Silicone socks for P1/X1
- Allen keys, screwdrivers, wrenches
Who it fits
Good fit for
P1 and X1 owners due to replace a worn wiper brush or torn sock.
Who should skip it
Anyone wanting clog needles, scrapers or finishing tools in the same box.
Verdict: A cheap hotend-care restock; quantities are unstated.
TYJAN3D P1/X1 kit contents
P1S, P1P, X1, X1C, X1E
Listed printers.
Nozzle wiper parts
Replacement set.
Silicone brushes
For the wiper.
Silicone socks
Heat block covers.
Hand tools
Allen, screwdrivers, wrenches.
Quantities
Not stated.
Why these parts wear
Each print starts with the nozzle wiped across the brush, and hot nozzles slowly cut it down until it stops cleaning. Socks tear when a blob forms on the block. Both are cheap but easy to put off; with spares on the shelf you change them before they cause a failed print.
Fitting them
With the hotend cold, pull the old sock off and slide the new one on until it seats around the nozzle. The wiper brush lifts out of its holder at the back of the bed. Choose the TYJAN3D P1/X1 kit if you only need these wear parts; choose a fuller tool kit if you also want needles and scrapers.
Before you order
Checks for the TYJAN3D P1/X1 kit.
Check before you buy
- Your Bambu is a P1S, P1P, X1, X1C or X1E
- You need wiper brushes or socks
- You accept unknown TYJAN3D part counts
- You have other tools for clogs
The product at a glance
TYJAN3D P1S Maintenance Kit
Best for: P1 and X1 owners
View on Amazon: TYJAN3D P1S Maintenance Kit Affiliate link
TYJAN3D P1/X1 kit: nozzle wiper parts, silicone brushes and socks, Allen keys, screwdrivers and wrenches; counts not given.
Pros
- Covers main wear parts
- Low price
- Tools included
Cons
- No quantities
- No needles or scrapers
Good fit if
- You own a P1 or X1
- Your wiper is worn
Skip if
- You want a full tool kit
Verdict: A handy restock of P1/X1 wear parts.
If you are actually after a document printer rather than a 3D printer, our brother laser printer review covers that category's specs and trade-offs separately.
Frequently asked questions
Which printers does the TYJAN3D P1/X1 kit fit?
Bambu Lab P1S, P1P, X1, X1C and X1E.
What parts come in the TYJAN3D P1/X1 kit?
Nozzle wiper parts, silicone brushes, silicone socks and basic hand tools.
How many socks are in the TYJAN3D P1/X1 kit?
TYJAN3D does not give quantities.
Does the TYJAN3D P1/X1 kit include cleaning needles?
No needles are listed.
Does the TYJAN3D P1/X1 kit fit the A1?
No; TYJAN3D sells a separate A1 kit.
