As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

JAMG HE Gingiva Mask Flexible Resin (Red) Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

JAMG HE's Gingiva Mask resin is a soft, flexible material for printing the removable gum part of a dental implant model, the piece a technician lifts off to check how an abutment or crown margin sits below the tissue line. That makes it a lab material, not a general flexible resin for hobby parts. The 500g bottle is sold in red and pink; this is the red one, although its color bullet describes a natural pink, so expect a gum tone rather than a bright red. JAMG HE says the cured mask is tear resistant and can be trimmed by hand, and it pairs the resin with rigid model resins such as Liqcreate Dental Model Pro for the arch underneath. Hardness is given as "Shore A 6062", most likely a Shore A range of about 60 to 62, which sits around a pencil eraser. The page gives no exposure times and cites no biocompatibility standard, so treat it as a model material only. We read the listing and did not print with it.

What stands out

  • Flexible, tear-resistant gum material
  • Shore A hardness around 60-62
  • Open SLA, MSLA and DLP printers at 385-420nm
  • 500g bottle, red or pink

Who it fits

Good fit for

Dental labs that print implant models and want a soft gum mask that lifts off and trims easily, on an open resin printer.

Who should skip it

Anyone looking for a general flexible resin for gaskets or cosplay, labs that need a certified intraoral material, or users who want printed exposure settings.

Verdict: A focused gum-mask resin for implant models; plan to dial in exposure yourself and read "red" as a gum shade.

Gingiva Mask red, in plain terms

Shore A about 60-62 (listed as "6062")

Soft and bendable, firm enough to keep its shape on the model.

385-420nm, open SLA/MSLA/DLP

Fits most open dental and hobby resin printers; closed-cartridge systems are not named.

Tear resistant, trims by hand

The mask can be cut back around an implant site without splitting.

No added pigment solution

JAMG HE says this makes shade matching with the model easier.

500g bottle

Gum masks are thin, so a bottle covers many cases.

How a gum mask fits the model

On an implant case the arch is printed in a rigid model resin and the soft tissue around the analogs is printed separately in this gingiva resin. Because it flexes, the mask can be pulled off to see the implant platform and pressed back on to judge emergence profile. JAMG HE names Liqcreate Dental Model Pro in beige or grey as a partner model resin, which helps if your lab already runs those. The color bullet and the title disagree (pink vs red), and pink is sold as its own listing, so compare photos if the shade matters for case presentation.

Printing JAMG HE gingiva resin

With no layer times on the page, start from your printer's soft or flexible resin profile and run a small calibration print before a real case. Soft resins need support placement that does not tear the thin margins, and flexible prints can be sticky until fully washed and cured, so give the mask a careful rinse and a full post-cure. Keep the bottle out of light and shake it before each use.

Before ordering this gingiva resin

A short check for JAMG HE's red gum mask resin.

Check before you buy

  • Your printer is an open 385-420nm machine for JAMG HE gingiva resin
  • You print implant models that need a removable JAMG HE gum mask
  • You can calibrate exposure without listed JAMG HE settings
  • A gum shade works for you even though the JAMG HE listing says red

The product at a glance

JH JAMG HE Flexible Gingiva Mask Resin 500g

Best for: Removable gum masks on implant models

Resin Type
Flexible
Curing Wavelength
385 420nm
Compatible Technology
SLA, MSLA, DLP
Net Weight
500g
Application
Gingiva masks, dental implants
Shore Hardness
Shore A 6062

View on Amazon: JH JAMG HE Flexible Gingiva Mask Resin 500g Affiliate link

JAMG HE Gingiva Mask resin, 500g red: a soft, tear-resistant gum material for removable masks on implant models.

Pros

  • Flexible and tear resistant
  • Trims by hand for a close fit
  • Works on open 385-420nm printers

Cons

  • No exposure settings listed
  • Red title vs pink color bullet
  • No biocompatibility standard cited

Good fit if

  • You make implant models with soft tissue
  • You already run a rigid dental model resin

Skip if

  • You need a general-purpose flexible resin

Verdict: A specialist gum-mask resin for implant model work.

Specifications side by side

Spec JH JAMG HE Flexible Gingiva Mask Resin 500g
Resin Type Flexible
Curing Wavelength 385 420nm
Compatible Technology SLA, MSLA, DLP
Net Weight 500g
Application Gingiva masks, dental implants
Shore Hardness Shore A 6062
Printing Technology Resin
Color Red
Model DN

Frequently asked questions

Is JAMG HE Gingiva Mask resin red or pink?

The title says red while the color bullet describes a natural pink; a separate pink listing also exists.

How soft is JAMG HE gingiva resin when cured?

The listing gives Shore A "6062", which reads as roughly Shore A 60-62.

Can the JAMG HE gum mask resin go in the mouth?

The listing cites no biocompatibility standard, so use it on models only.

What printers does JAMG HE gingiva resin work with?

Open SLA, MSLA and DLP printers in the 385-420nm range.

See also