KOYOFEI 200x140mm FEP Release Film Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
FEP film is the clear, non-stick floor of a resin vat, and it wears out: scratches, dents and punctures all mean a replacement. KOYOFEI's pack gives six sheets of 200×140mm at 0.15mm thick for $9.99, which works out under $2 a sheet. The fit list covers compact LCD printers, including ELEGOO's Mars line from the original through Mars 3 Pro and Mars 4 DLP, Anycubic's Photon Mono and Mono 4K, Phrozen's Sonic Mini 4K, Creality's Halot One and the Creality LD-002. KOYOFEI quotes 95% light transmission and describes a low-friction, non-wettable surface that releases layers cleanly. Change steps are printed on the packaging. Our view is drawn from KOYOFEI's product page.
What stands out
- Six sheets for under $10
- Long list of small-format printers
- 95% light transmission claimed
- Fitting steps printed on the box
Who it fits
Good fit for
Owners of small resin printers in the Mars, Photon Mono, Halot One or similar class who go through FEP sheets and want a stock of cheap spares.
Who should skip it
Skip it if your printer uses a larger vat, nFEP or ACF film, or if you prefer a pre-tensioned vat over re-stretching film yourself.
Verdict: Economical replacement FEP for compact resin printers.
FEP specs decoded
200 × 140 × 0.15mm
Sized for small vats; 0.15mm is a common thickness for these printers.
6 sheets
Several replacements before you need to reorder.
95% light transmission
UV reaches the resin without much loss, keeping exposure settings usable.
Non-stick, low friction
Cured layers peel away from the film on each lift.
Listing details
The film is clear and described as heat-resistant and durable for long use. The title's printer list is shorter than the bullet list, which adds the original Mars, Mars Pro and Sonic Mini 4K, so check the longer list if your model is missing from the title. The pack ships at 2.82oz. Model code is KYF-3D-030.
Swapping FEP
Drain and clean the vat, unscrew the frame, lay the new sheet between the frames and tighten evenly so the film is taut like a drum. Trim the excess, refit the vat and run a short test print. Replace the film as soon as you see punctures or deep scratches to protect the LCD below.
Fit check
Vat size is what matters.
Check before you buy
- Your vat takes a 200×140mm sheet
- Your printer uses FEP rather than ACF
- You can re-tension film yourself
- Your model is on the listing's printer list
The product at a glance
KOYOFEI 200x140mm FEP Release Film 6-Pack
Best for: Replacement FEP for compact LCD printers
- Dimensions
- 140 x 200 x 0.15mm
- Release Film Type
- FEP
- Film Thickness
- 0.15mm
- Printing Technology
- Resin
- Resolution
- 4K
- Width
- 5.51 inches
View on Amazon: KOYOFEI 200x140mm FEP Release Film 6-Pack Affiliate link
KOYOFEI six-pack of 200×140×0.15mm FEP release film for compact resin printers such as ELEGOO Mars, Photon Mono, Sonic Mini 4K, Halot One and LD-002; 95% light transmission, non-stick, $9.99.
Pros
- Under $2 per sheet
- Broad small-printer fit list
- Instructions on pack
Cons
- Title and bullets list different printers
- Needs manual tensioning
- Small vats only
Good fit if
- You run a Mars or Photon Mono
- You replace FEP often
Skip if
- Your vat uses ACF film
- Your vat is bigger than 200×140mm
Verdict: Good-value FEP spares for small resin vats.
Specifications side by side
| Spec | KOYOFEI 200x140mm FEP Release Film 6-Pack |
|---|---|
| Dimensions | 140 x 200 x 0.15mm |
| Release Film Type | FEP |
| Film Thickness | 0.15mm |
| Printing Technology | Resin |
| Resolution | 4K |
| Width | 5.51 inches |
| Weight | 2.82 ounces |
| Size | 200x140mm |
| Color | Clear |
| Model | KYF-3D-030 |
Frequently asked questions
Which printers take this 200×140mm FEP?
The listing names ELEGOO Mars models up to Mars 4 DLP, Photon Mono and Mono 4K, Sonic Mini 4K, Halot One and LD-002.
How thick is the film?
0.15mm.
How many FEP sheets does KOYOFEI include?
Six.
Are instructions included?
Yes, change steps are printed on the packaging.
Featured in
See also
- koyofei cr 10 se belt kit review
- iemai high speed petg filament review
- iemai petg filament 1 75mm review
- koyofei bambu p1 x1 silicone socks review
- koyofei 5pcs screen protector LCD resin 3d printers review
- KOYOFEI 260x200mm FEP Film 6-Pack Review (2026)
- KOYOFEI Ender 3 V3 KE Belt Kit Review (2026)
- geeetech 3d printer kids review
- vesici 6 PCs cast iron review
