IEMAI High Speed PETG Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
IEMAI aims this red PETG at fast CoreXY machines, claiming flow good for up to 600mm/s, and names Bambu Lab X1/P1P with AMS, Creality K1 and K1 Max, AnkerMake M5 and Flsun V400 alongside ordinary 1.75mm printers. A 1kg spool costs under $15. IEMAI measures diameter by CCD to keep it within ±0.02mm, dries each roll for a full day, then vacuum-bags it alongside a desiccant pack, and the spool has a window and scale for checking how much is left. What the page leaves out is any nozzle or bed temperature, so plan on your slicer's generic PETG profile. We worked from IEMAI's description and did not print a test roll.
What stands out
- Rated to 600mm/s on fast printers
- 24-hour drying before sealing
- Spool window shows what remains
- Low price for a kilo
Who it fits
Good fit for
Anyone running a fast CoreXY machine who wants an inexpensive, tougher-than-PLA material for brackets, enclosures and outdoor fixtures in a bold red.
Who should skip it
Pass on it if you want the maker's recommended temperatures on the page, or if you need clear PETG for light-transmitting parts; IEMAI sells transparent colors separately.
Verdict: Cheap, fast-flow PETG; bring your own print settings.
Red PETG specs in plain words
Up to 600mm/s
A ceiling for very fast machines; most printers will run well below it.
±0.02mm on 1.75mm
Consistent diameter means steady extrusion and fewer under- or over-filled lines.
Day-long drying, vacuum bag
Arrives low in moisture, which cuts stringing and bubbles with PETG.
1kg spool with window
You can see the remaining length before starting a long job.
Material notes
IEMAI pitches its PETG as PLA-easy to print with ABS-like strength and heat resistance, adding impact resistance, some flexibility and low shrinkage. The winding is machine-done and every spool is hand-checked against tangles. The listing calls it weather resistant for outdoor fixtures, but gives no heat-deflection or UV figures to back that up.
Printing it
Start from a standard PETG profile and tune temperature with a tower, since no range is given. PETG sticks hard to smooth PEI, so a textured plate or glue layer helps parts release. On an AMS-fed printer the 1kg spool format should load like other IEMAI rolls the listing names as compatible.
Before ordering
Check these points first.
Check before you buy
- Your printer runs 1.75mm filament
- You have a PETG profile to start from
- You want opaque red, not clear
- You print functional parts rather than display pieces
The product at a glance
IEMAI High Speed PETG Filament (1 kg, Red)
Best for: Fast, low-cost PETG parts
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 600mm/s
- Dimensional Accuracy
- ±0.02 mm
- Printing Technology
- FDM
View on Amazon: IEMAI High Speed PETG Filament (1 kg, Red) Affiliate link
IEMAI red High Speed PETG: a kilo of 1.75mm held within ±0.02mm, rated to 600mm/s, oven-dried a full day before sealing, plus a spool window.
Pros
- Inexpensive per kilo
- Flow tuned for fast CoreXY machines
- Remaining-filament window
Cons
- No temperature settings listed
- Weather resistance not quantified
- Opaque red only in this listing
Good fit if
- You run a K1, X1 or similar fast printer
- You print tough functional red parts
Skip if
- You need a printed temperature guide
- You want see-through PETG
Verdict: Budget high-speed PETG that needs your own tuning.
Specifications side by side
| Spec | IEMAI High Speed PETG Filament (1 kg, Red) |
|---|---|
| Material Type | PETG |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 600mm/s |
| Dimensional Accuracy | ±0.02 mm |
| Printing Technology | FDM |
| Compatible Material | PETG |
| Print Speed | 600mm/s |
| Features | High Speed |
| Color | Red |
| Size | 1KG |
| Surface Finish | Smooth |
| Weight | 2.2 pounds |
Frequently asked questions
What temperature does IEMAI red PETG need?
The listing gives none; begin with your slicer's PETG preset and adjust.
Can this IEMAI PETG run at 600mm/s?
That is IEMAI's upper rating for high-speed machines; what you actually reach is set by your hotend's melt rate.
Is the red PETG dried before shipping?
Yes: a full day of drying, then a vacuum bag with desiccant, per the listing.
Does it work with the Bambu AMS?
IEMAI lists Bambu Lab X1/P1P with AMS among compatible setups.
Featured in
See also
- iemai petg filament 1 75mm review
- iemai carbon fiber pla filament review
- aoseed pla filament set 1 75mm review
- IEMAI PETG-CF 1.75mm Matte Black Review: Who It Fits and Who Should Skip It
- IEMAI PETG-CF Carbon Fiber Filament (Matte Purple, 1kg) Review
- IEMAI Orange ABS Filament (1.75mm, 1kg) Review
- IEMAI Marble ASA Filament (1.75mm, 1kg) Review
- creality k1 max high speed 3d printer review
- singer singer s0100 high speed review
