As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best FEP Films for Resin 3D Printers: 7 Spec-Based Picks

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

FEP film is the clear, non-stick sheet at the bottom of a resin vat; it lets UV light through and lets each layer peel away, and it wears out with use. Our top pick is ELEGOO's 5-pack for the Mars 4, Mars 5 and Mars 5 Ultra: 206x146mm, 0.15mm thick, 95% transmittance. KOYOFEI's 6-pack for older 6-inch printers is the cheapest pick. The others cover the Photon Mono 2 and 4 (ring-mounted), A4-size printers, the Saturn 4 line and 13-inch machines, plus an ELEGOO Saturn vat with FEP already fitted. We compared 7 products by published size, thickness and printer list.

Our top pick: ELEGOO Mars 4/5 FEP Release Film 5-Pack.

Quick picks

#ProductBest forPrice
1 ELEGOO Mars 4/5 FEP Release Film 5-Pack Best overall Best overall Check price of ELEGOO Mars 4/5 FEP Release Film 5-Pack on Amazon
2 KOYOFEI 200x140mm FEP Release Film 6-Pack Best budget Best budget Check price of KOYOFEI 200x140mm FEP Release Film 6-Pack on Amazon
3 ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack Best for Photon Mono Best for Photon Mono Check price of ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack on Amazon
4 Aorita3D FEP Film 290x210mm Best A4 size Best A4 size Check price of Aorita3D FEP Film 290x210mm on Amazon
5 UniTak3D 5-Pack FEP Film 273x176mm Best for Saturn 4 Best for Saturn 4 Check price of UniTak3D 5-Pack FEP Film 273x176mm on Amazon
6 HIKUDIY 380x260mm FEP Film Best large format Best large format Check price of HIKUDIY 380x260mm FEP Film on Amazon
7 ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP Best ready-to-use vat Best ready-to-use vat Check price of ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP on Amazon

The best fit for you

Our 7 picks

Best overall

ELEGOO Mars 4/5 FEP Release Film 5-Pack

Best for: Best overall

Release Film Type
✓ FEP
Dimensions
206*146mm
Film Thickness
0.15mm

View on Amazon: ELEGOO Mars 4/5 FEP Release Film 5-Pack Affiliate link

Read our full review

ELEGOO 5-pack of FEP release film for Mars 4, Mars 5 and Mars 5 Ultra: 206x146mm, 0.15mm thick, 95% UV transmittance, non-stick and free of wrinkles and bubbles.

Pros

  • Official ELEGOO size
  • Five sheets
  • 95% transmittance

Cons

  • Mars 4 and 5 series only

Good fit if

  • You print on a Mars 5 Ultra and replace film every few months
  • You want factory-cut sheets

Skip if

  • You own a Saturn

Verdict: ELEGOO's own FEP, five at a time.

Best budget

KOYOFEI 200x140mm FEP Release Film 6-Pack

Best for: Best budget

Release Film Type
✓ FEP
Dimensions
140 x 200 x 0.15mm
Film Thickness
0.15mm
Printing Technology
Resin
Resolution
4K
Width
5.51 inches

View on Amazon: KOYOFEI 200x140mm FEP Release Film 6-Pack Affiliate link

Read our full review

KOYOFEI 6-pack of 200x140mm FEP film for older small printers: ELEGOO Mars, Mars 2 and 3 (and Pro), Mars 4 DLP, Photon Mono, Mono 4K, Sonic Mini 4K, Halot One and LD-002; 95% transmission, with fitting steps printed on the pack.

Pros

  • Cheapest pick here
  • Six sheets
  • Long printer list

Cons

  • Older printer sizes only

Good fit if

  • You still run a Mars 2 Pro or Photon Mono
  • You punctured your film and need spares

Skip if

  • Your printer takes a 206x146mm film

Verdict: Cheap FEP for older 6-inch printers.

Best for Photon Mono

ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack

Best for: Best for Photon Mono

Release Film Type
✓ FEP
Dimensions
8.66 × 6.3 × 0.75 inches

View on Amazon: ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack Affiliate link

Read our full review

ANYCUBIC 2-pack of ring-mounted FEP film for Photon Mono 2 and Mono 4: no cutting or ring removal, about 3 minutes to fit. On the Mono 4 and 4 Ultra it does not support fast mode.

Pros

  • Pre-framed, no cutting
  • Official ANYCUBIC film

Cons

  • Only 2 sheets
  • No fast mode on Mono 4

Good fit if

  • You hate cutting and tensioning FEP
  • You print standard mode on a Mono 2

Skip if

  • You print in Mono 4 fast mode

Verdict: Ring-mounted FEP that installs in minutes.

Best A4 size

Aorita3D FEP Film 290x210mm

Best for: Best A4 size

Release Film Type
✓ FEP
Dimensions
290x210x0.15mm
Maximum Temperature
-240°C to 205°C
Film Thickness
0.15mm
Printing Technology
Resin
Resolution
8K, 4K

View on Amazon: Aorita3D FEP Film 290x210mm Affiliate link

Aorita3D 290x210x0.15mm A4 FEP film for Saturn, Saturn 2, 3, 3 Ultra, 4, 4 Ultra and 8K, Mars 4 Max, Photon Mono X and M5 series, Sonic Mighty 4K and more; 95% transmission, 300% ductility. The title says 5 pieces, the spec says 3.

Pros

  • Fits many 9-10 inch printers
  • Ductility and bend figures given

Cons

  • Pack count conflicts on the listing

Good fit if

  • You own several mid-size resin printers
  • You cut your own film to size

Skip if

  • You want pre-framed film

Verdict: An A4 FEP that covers most mid-size printers.

Best for Saturn 4

UniTak3D 5-Pack FEP Film 273x176mm

Best for: Best for Saturn 4

Release Film Type
✓ FEP
Primary Material
FEP
Dimensions
273x176mm
Maximum Temperature
205°C
Film Thickness
0.15mm
Printing Technology
Resin

View on Amazon: UniTak3D 5-Pack FEP Film 273x176mm Affiliate link

UniTak3D 5-pack of 273x176x0.15mm FEP liner for ELEGOO Saturn 2, 3, 4, 4 Ultra and 4 Ultra 16K: over 95% transmittance, low release force and resistance to strong acids and alkalis.

Pros

  • Exact Saturn 4 size
  • Five sheets
  • Chemical resistance stated

Cons

  • Saturn only

Good fit if

  • You run a Saturn 4 Ultra 16K and want FEP rather than PFA
  • You print daily and wear through film

Skip if

  • You own an ANYCUBIC printer

Verdict: A low-cost five-pack for the Saturn line.

Best large format

HIKUDIY 380x260mm FEP Film

Best for: Best large format

Release Film Type
✓ FEP
Primary Material
FEP
Dimensions
380x260mm
Maximum Temperature
205 °C
Film Thickness
0.15mm
Printing Technology
Resin

View on Amazon: HIKUDIY 380x260mm FEP Film Affiliate link

HIKUDIY 6-pack of 380x260mm FEP for 12.8-13.6 inch printers: Photon Mono M7 Max, M3 Max, M3 Premium, Jupiter 6K and SE, Sonic Mighty 8K and Peopoly Phenom; 0.15mm, over 95% transmittance, -240 to 205°C working range.

Pros

  • Big enough for 13-inch screens
  • Six sheets
  • Temperature range listed

Cons

  • Must be cut and tensioned

Good fit if

  • You print on an M7 Max or Jupiter
  • You want spare film for big vats

Skip if

  • Your printer is a 6-inch Mars

Verdict: FEP for the big resin printers.

Best ready-to-use vat

ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP

Best for: Best ready-to-use vat

Release Film Type
✓ FEP
Primary Material
Anodized aluminum
Dimensions
292.8*172.4*33mm
Printing Technology
LCD
Color
Black
Weight
2.2 pounds

View on Amazon: ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP Affiliate link

Read our full review

ELEGOO metal resin tank for Saturn 2 and Saturn 3 with FEP pre-installed: anodized aluminum, 292.8x172.4x33mm, a dust lid, and feet that keep the film off the bench; works with all resin types.

Pros

  • FEP already tensioned
  • Second vat for color changes
  • Dust lid included

Cons

  • Costs more than film alone
  • Saturn 2 and 3 only

Good fit if

  • You switch resin colors on a Saturn 3
  • You want a spare vat ready

Skip if

  • You only need film

Verdict: A complete FEP vat for the Saturn 2 and 3.

Specifications side by side

Spec ELEGOO Mars 4/5 FEP Release Film 5-Pack KOYOFEI 200x140mm FEP Release Film 6-Pack ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack Aorita3D FEP Film 290x210mm UniTak3D 5-Pack FEP Film 273x176mm HIKUDIY 380x260mm FEP Film ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP
Primary Material not stated not stated not stated not stated FEP FEP Anodized aluminum
Dimensions 206*146mm 140 x 200 x 0.15mm not stated 290x210x0.15mm 273x176mm 380x260mm 292.8*172.4*33mm
Maximum Temperature not stated not stated not stated -240°C to 205°C 205°C 205 °C not stated
Release Film Type FEP FEP FEP FEP FEP FEP FEP
Film Thickness 0.15mm 0.15mm not stated 0.15mm 0.15mm 0.15mm not stated
Printing Technology not stated Resin not stated Resin Resin Resin LCD
Color Clear Clear not stated not stated 5PCS FEP Release Liner Film not stated Black
Resolution not stated 4K not stated 8K, 4K 16K 8K not stated
Width not stated 5.51 inches not stated not stated not stated not stated not stated
Weight not stated 2.82 ounces not stated not stated not stated not stated 2.2 pounds
Size S-5PCS for Mars 4/5/5 Ultra 200x140mm not stated 3PCS FEP 290*210mm 5Pcs(273*176mm) 380x260mm S-for Saturn 2/3
Model not stated KYF-3D-030 not stated not stated Uni085FEP-5 HKD-0154 not stated

How to choose FEP film

  1. Replace FEP when it clouds or dents

    FEP is a consumable; ANYCUBIC recommends regular replacement for better prints.

  2. Check fast mode support

    ANYCUBIC's FEP fits the Mono 4 and 4 Ultra but not their fast printing mode; that mode needs ACF film.

  3. 0.15mm is the common thickness

    ELEGOO, Aorita3D, UniTak3D and HIKUDIY all list 0.15mm.

  4. Keep spare film sealed

    Unopened sheets stay scratch-free; KOYOFEI prints fitting steps on the pack.

Frequently asked questions

What size FEP does the ELEGOO Mars 5 Ultra use?

ELEGOO lists 206x146mm at 0.15mm thick.

Can ANYCUBIC FEP film be used in Photon Mono 4 fast mode?

No, ANYCUBIC says its FEP does not support the fast printing mode.

What size FEP fits the Saturn 4 Ultra?

273x176mm, as in the UniTak3D 5-pack.

How many sheets are in the Aorita3D A4 FEP pack?

The title says 5 and the spec says 3, so check before ordering.

Does the ELEGOO Saturn 2 and 3 metal tank include FEP?

Yes, the film is pre-installed.

See also