KOYOFEI 260x200mm FEP Film 6-Pack Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The KOYOFEI 6-pack gives you six 260x200mm FEP release sheets, 0.15mm thick, for resin printers with 7.1 to 9.25 inch screens, and six sheets at this size is the reason to buy: one pack covers a long run of vat repairs. KOYOFEI lists 95% light transmission and a heat range of -240°C to 205°C, and names a long fit list: ELEGOO Mars 4, Mars 4 Ultra, Mars 4 Max, Saturn and Saturn S, Anycubic Photon Mono 2, Mono X, X 6K, X 6KS and X2, Phrozen Sonic Mini 8K and Mighty 4K, Creality Halot Lite and Halot Ray, plus M3, M3 Plus and LD-006. Replacement steps are printed on the packaging. The sheet count, sizes and fit list are as published on the listing.
What stands out
- 6 sheets, 260 x 200mm
- 0.15mm thick, 95% transmission
- Fits 7.1-9.25 inch resin vats
Who it fits
Good fit for
Owners of the listed mid-size MSLA printers who replace FEP after punctures, clouding or failed prints stuck to the film.
Who should skip it
Owners of small 6-inch printers (they need 200x140mm) or 10-inch-plus machines, and anyone wanting nFEP or PFA for lower peel force.
Verdict: A plentiful supply of standard FEP for mid-size resin vats.
KOYOFEI FEP specs
6 sheets
Several replacements.
260 x 200mm
Cut-to-fit for 7-9 inch vats.
0.15mm thick
Standard FEP gauge.
95% light transmission
Listed UV pass-through.
-240°C to 205°C
Listed heat range.
Model KYF-3D-031
Listing code.
Why FEP wears out
FEP is the clear film at the bottom of a resin vat that each layer cures against and peels from. Scratches, cloudy patches or holes stop UV light evenly reaching the resin or leak resin onto the screen, so it is a regular spare. Standard FEP like this peels with more force than nFEP or PFA, but it is cheaper per sheet.
Replacing the film
Drain and clean the vat, remove the frame screws, then stretch a new sheet flat and tension it until it gives a drum-like tap. Trim the excess, refit and check the vat for leaks with a little alcohol before adding resin. Pick this 6-pack if your printer is on the list and you go through film often; pick a 3-sheet pack if you rarely replace it.
Before you order
Checks for the KOYOFEI 260x200mm FEP pack.
Check before you buy
- Your vat takes a 260 x 200mm sheet
- Your printer is on the 7.1-9.25 inch fit list
- You have the vat frame tools to re-tension film
- You are fine with standard FEP rather than PFA
The product at a glance
KOYOFEI 6-Pack FEP Film 260x200mm
Best for: Mars 4, Saturn, Mono X vats
- Dimensions
- 260x200mm
- Maximum Temperature
- 205 ° C
- Release Film Type
- FEP
- Film Thickness
- 0.15mm
- Printing Technology
- Resin
- Resolution
- 8K
View on Amazon: KOYOFEI 6-Pack FEP Film 260x200mm Affiliate link
KOYOFEI 6-pack FEP film, 260x200x0.15mm, 95% transmission, -240 to 205°C, for 7.1-9.25 inch resin printers.
Pros
- Six sheets per pack
- Long fit list
- Instructions on box
Cons
- Standard FEP, higher peel force
- Too small for 10-inch vats
Good fit if
- You run a mid-size MSLA printer
- You replace film often
Skip if
- You want nFEP or PFA
Verdict: A bulk FEP pack for mid-size vats.
Specifications side by side
| Spec | KOYOFEI 6-Pack FEP Film 260x200mm |
|---|---|
| Dimensions | 260x200mm |
| Maximum Temperature | 205 ° C |
| Release Film Type | FEP |
| Film Thickness | 0.15mm |
| Printing Technology | Resin |
| Resolution | 8K |
| Weight | 5.29 ounces |
| Size | 260x200mm |
| Color | Clear |
| Model | KYF-3D-031 |
Frequently asked questions
Which printers fit KOYOFEI 260x200mm FEP?
Mars 4, Mars 4 Ultra/Max, Saturn, Saturn S, Photon Mono 2, Mono X/X 6K/6KS/X2, M3, M3 Plus, Sonic Mini 8K, Mighty 4K, Halot Lite, Halot Ray and LD-006, per the listing.
How many sheets come in the 260x200mm KOYOFEI box?
Six.
How thick is the KOYOFEI FEP?
0.15mm.
What light transmission does KOYOFEI list?
95%.
Are instructions included?
Yes, printed on the packaging.
See also
- haldis blue dual gear bowden extruder review
- elegoo mars 4 5 fep film 5 pack review
- elegoo smart mini heater resin printer review
- koyofei bambu p1 x1 silicone socks review
- koyofei 5pcs screen protector LCD resin 3d printers review
- KOYOFEI 200x140mm FEP Release Film Review: Who It Fits and Who Should Skip It
- KOYOFEI CR-10 SE Belt Kit Review (2026): A Spec-Based Look
- KOYOFEI Ender 3 V3 KE Belt Kit Review (2026)
- anycubic resin 3d printer review
- imarku 6 PCs non stick review
