Haldis Blue Dual Gear Bowden Extruder Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Haldis 3D Dual Gear Extruder (model CR10S-EX, sold under the Xirbbo brand) is a blue aluminum Bowden feeder for 1.75mm filament, and the detail that sets it apart from look-alike kits is the box contents: all screws and parts are included, plus two extra stainless steel gears. It fits the CR-10, CR-10S, CR-10S Pro, Ender 3 and Tornado per the listing. The dual gear drive pinches filament from two sides for firmer feeding and snappy retractions, and the aluminum body replaces the stock plastic arm. It arrives as a kit you put together; the listing calls that easy but gives no gear ratio or E-step value. Specs and fit come from the Haldis listing.
What stands out
- Two spare stainless gears included
- All screws and parts in the box
- Blue aluminum, 1.75mm
Who it fits
Good fit for
CR-10, CR-10S Pro and Ender 3 owners replacing a cracked plastic feeder who want spare drive gears for later wear.
Who should skip it
Direct drive users, anyone needing geared reduction for TPU, or buyers who want it pre-assembled.
Verdict: A complete aluminum dual gear kit with spare gears for Creality Bowden printers.
Haldis extruder specs
Dual gear drive
Two-sided grip.
Aluminum alloy block, blue
Replaces plastic arm.
1.75mm Bowden
Standard Creality setup.
Model CR10S-EX
Listing code.
+2 stainless steel gears
Spares included.
All screws and parts
DIY assembly.
What comes in the kit
Haldis packs the extruder block, its screws and fittings, and two extra stainless steel gears. Drive gears wear or clog with filament dust over time, so a spare pair extends the kit's life. Gear ratio, spring and weight are not listed; the design follows the common CR-10S Pro style aluminum feeder.
Fitting the Haldis feeder
Mount the block to the extruder stepper in the stock position, reuse the Bowden coupler, set the spring so filament is held firmly, then check E-steps with a 100mm extrusion test. Choose the Haldis kit for the included screws and spare gears; choose a geared BMG-style feeder if flexible filament matters more.
Before you order
Checks for the Haldis dual gear extruder.
Check before you buy
- Your printer is a CR-10, CR-10S, CR-10S Pro, Ender 3 or Tornado
- It runs 1.75mm filament through a Bowden tube
- You are happy to build the Haldis block yourself
- You keep the spare gears for later wear
The product at a glance
Xirbbo Aluminum Dual Gear Bowden Extruder
Best for: CR-10 and Ender 3 feeders
- Primary Material
- Aluminum Alloy
- Extruder Type
- Bowden Extruder
- Color
- Blue
View on Amazon: Xirbbo Aluminum Dual Gear Bowden Extruder Affiliate link
Haldis 3D (Xirbbo) blue aluminum dual gear Bowden extruder CR10S-EX for 1.75mm; CR-10/10S/10S Pro, Ender 3, Tornado; screws plus 2 spare stainless gears.
Pros
- Spare gears included
- Complete screw set
- Metal block
Cons
- Assembly required
- No ratio or E-steps listed
Good fit if
- Your plastic feeder cracked
- You want spare gears
Skip if
- You print a lot of TPU
Verdict: A complete dual gear kit with spares.
Specifications side by side
| Spec | Xirbbo Aluminum Dual Gear Bowden Extruder |
|---|---|
| Primary Material | Aluminum Alloy |
| Extruder Type | Bowden Extruder |
| Color | Blue |
| Model | CR10S-EX |
Frequently asked questions
Which printers does the Haldis extruder fit?
CR-10, CR-10S, CR-10S Pro, Ender 3 and Tornado, per the listing.
What extra parts come with the Haldis extruder?
Two stainless steel gears, plus all needed screws and parts.
Is the Haldis extruder assembled?
No, you assemble it; the listing calls it easy.
What filament size does the Haldis kit take?
1.75mm.
Who sells the Haldis extruder?
It is listed under the Xirbbo brand with Haldis 3D in the title.
See also
- elegoo mars 4 5 fep film 5 pack review
- elegoo smart mini heater resin printer review
- elegoo mars 4 5 fep liner film 3 pack review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- snapmaker artisan dual extrusion 3d printer review
- tesmert dual monitor review
