As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ELEGOO Mars 4/5 FEP Film 5-Pack Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

ELEGOO's 5-pack holds five FEP release sheets cut to 206x146mm at 0.15mm thick, made for the vats of its own Mars 4, Mars 5 and Mars 5 Ultra printers. Buying from the printer maker removes the guesswork about size, and five sheets suit anyone who prints most days or has had film punctured by a failed support. ELEGOO lists 95% UV transmittance, a non-stick, chemical-resistant surface that does not degrade under UV, and sheets free of wrinkles and bubbles. The listing names no other printers, so owners of other brands should measure their vat first. We based this on ELEGOO's listing, not on our own prints.

What stands out

  • 5 sheets, 206 x 146mm
  • 0.15mm, 95% UV transmittance
  • Made for Mars 4 / 5 / 5 Ultra

Who it fits

Good fit for

Mars 4, Mars 5 and Mars 5 Ultra owners who print often and want spare film on hand for punctures or clouding.

Who should skip it

Owners of Saturn or other larger printers, occasional printers who will not use five sheets, or anyone wanting PFA for lower peel force.

Verdict: The safe-fit FEP supply for ELEGOO Mars 4 and 5 owners who print a lot.

ELEGOO Mars FEP specs

5 sheets

For frequent replacements.

206 x 146mm

Mars 4/5/5 Ultra vat size.

0.15mm thickness

Standard FEP.

95% UV transmittance

Listed figure.

Non-stick, UV-stable surface

Per listing.

Other printers

Not listed.

Factory-size film for Mars vats

The Mars 4 and Mars 5 series share one vat film size, so one pack covers any of the three. A standard FEP sheet needs re-tensioning in the vat frame when fitted. ELEGOO describes the sheets as smooth and free of scratches, which matters because any mark in the film shows up as a flaw on the bottom layers.

When to change Mars FEP

Replace a sheet when you see a hole, a cloudy patch where layers keep failing, or deep scratches from scraping. Always remove cured bits with a plastic spatula, never metal. Choose the 5-pack if you print daily or run more than one Mars printer; ELEGOO's 3-sheet pack of the same film costs less if you replace film a couple of times a year.

Before you order

Checks for the ELEGOO Mars FEP 5-pack.

Check before you buy

  • You own a Mars 4, Mars 5 or Mars 5 Ultra
  • You can re-tension film in the vat frame
  • Five Mars sheets match how often you print
  • Standard FEP suits you rather than PFA

The product at a glance

ELEGOO Mars 4/5 FEP Release Film 5-Pack

Best for: Busy Mars 4 and 5 owners

Dimensions
206*146mm
Release Film Type
FEP
Film Thickness
0.15mm

View on Amazon: ELEGOO Mars 4/5 FEP Release Film 5-Pack Affiliate link

ELEGOO 5-pack FEP release film, 206x146x0.15mm, 95% UV transmittance, for Mars 4, Mars 5 and Mars 5 Ultra.

Pros

  • Exact Mars 4/5 size
  • Five sheets
  • Maker's own film

Cons

  • Mars models only
  • Standard FEP peel force

Good fit if

  • You print on a Mars 4 or 5 often
  • You run more than one Mars

Skip if

  • You print a few times a year

Verdict: Bulk factory FEP for Mars printers.

Specifications side by side

Spec ELEGOO Mars 4/5 FEP Release Film 5-Pack
Dimensions 206*146mm
Release Film Type FEP
Film Thickness 0.15mm
Size S-5PCS for Mars 4/5/5 Ultra
Color Clear

Frequently asked questions

Which printers does the ELEGOO 5-pack FEP fit?

Mars 4, Mars 5 and Mars 5 Ultra.

What size is the ELEGOO Mars FEP sheet?

206 x 146mm, 0.15mm thick.

How many sheets are in this ELEGOO pack?

Five.

What UV transmittance does ELEGOO list?

95%.

Does it fit the Saturn?

No, the listing covers Mars 4 and Mars 5 models only.

See also