SUNLU Nylon-Like Resin (Grey, 2kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU's nylon-like resin is its answer to brittle prints: a 395-405nm photopolymer that SUNLU says is stronger and tougher than both its ABS-like and standard resins, so supports come off without snapping the part and thin features survive handling. This is the 2kg grey bottle, double the 1kg size, which makes sense once you have settled on the resin for functional parts such as clips, brackets, jigs and housings and print them in batches. SUNLU recommends printing at 25°C and reports an aging trial in which parts kept in a 55°C dry box for three months did not crack. Low shrinkage and a patented leak-proof bottle round out the claims. There are no exposure times, tensile or elongation figures. This review relies on SUNLU's listing and spec fields; we have not printed with this bottle.
What stands out
- 2kg grey nylon-like resin
- 395-405nm LCD, DLP, SLA
- Print at 25°C
- Tougher than ABS-like (SUNLU claim)
- 3 months at 55°C without cracking (SUNLU trial)
Who it fits
Good fit for
Makers who already like SUNLU nylon-like resin and print functional parts often enough to use 2kg, with a warm enough room to hold 25°C.
Who should skip it
First-time buyers who should try the 1kg size, anyone needing published strength numbers, and miniature painters who only need standard resin.
Verdict: A bulk bottle of SUNLU's tough resin for repeat functional prints.
SUNLU nylon-like 2kg specs
2000g
Twice the 1kg bottle for batch printing.
395-405nm
Fits common LCD, DLP and SLA printers.
25°C print temperature
SUNLU's recommended room and resin temperature.
Nylon-like toughness
Bends rather than snaps, per SUNLU.
55°C, 3 months
SUNLU's own aging trial, no cracking.
Where SUNLU nylon-like resin fits
Nylon-like resins sit at the tough end of the photopolymer range: they flex a little under load instead of shattering. SUNLU positions this one above its ABS-like resin for strength and says it holds up to support removal and long-term heat aging. That suits working parts more than display pieces. The listing does not give tensile strength, elongation or heat deflection, so for load-bearing parts test a sample before relying on it.
Printing a 2kg bottle of SUNLU nylon-like
Keep the room, vat and resin near the 25°C SUNLU recommends; tough resins thicken when cold and peel forces rise. Run a calibration print first, as no exposure times are given. With a 2kg bottle, shake well before each pour and keep it sealed and dark between sessions so the last half prints like the first. Wash in IPA and post-cure; tough resins can turn brittle if over-cured, so cure in short steps.
Before buying SUNLU nylon-like 2kg
Checks.
Check before you buy
- You have printed SUNLU nylon-like before or will use 2kg
- Your print room can stay near 25°C for SUNLU nylon-like
- You can calibrate SUNLU nylon-like exposure yourself
- Your SUNLU nylon-like parts do not need certified strength data
The product at a glance
SUNLU 2000g Nylon-Like 3D Resin
Best for: Functional resin parts
- Resin Type
- Nylon-Like
- Curing Wavelength
- 395-405nm
- Compatible Technology
- LCD, DLP, SLA
- Net Weight
- 2000g
- Application
- Functional parts
- Printing Technology
- Resin
View on Amazon: SUNLU 2000g Nylon-Like 3D Resin Affiliate link
SUNLU nylon-like resin, grey, 2kg: 395-405nm, print at 25°C, stronger and tougher than ABS-like per SUNLU, 55°C/3-month aging claim, leak-proof bottle.
Pros
- Tough for clips and brackets
- Bulk 2kg bottle
- Leak-proof bottle
Cons
- No strength figures
- No exposure settings
Good fit if
- You batch-print SUNLU nylon-like brackets and jigs
Skip if
- You want to trial SUNLU nylon-like in a 1kg bottle first
Verdict: A bulk tough resin for working parts.
Specifications side by side
| Spec | SUNLU 2000g Nylon-Like 3D Resin |
|---|---|
| Resin Type | Nylon-Like |
| Curing Wavelength | 395-405nm |
| Compatible Technology | LCD, DLP, SLA |
| Net Weight | 2000g |
| Application | Functional parts |
| Printing Technology | Resin |
| Compatible Material | Nylon |
| Weight | 4.41 pounds |
| Color | 2000g Grey |
| Model | Strong 3D Printer Resin Nylon Like |
Frequently asked questions
Is SUNLU nylon-like resin stronger than ABS-like?
SUNLU says it is stronger and tougher than its ABS-like and standard resins; no test numbers are listed.
How warm should the room be for the 2kg SUNLU nylon-like bottle?
Around 25°C, the print temperature SUNLU recommends.
How much SUNLU nylon-like resin is in this bottle?
2000g of grey resin.
Does SUNLU list exposure settings for nylon-like resin?
No, run a calibration print on your printer.
How durable are SUNLU nylon-like parts over time?
SUNLU reports parts showed no aging or cracking after three months in a 55°C dry box.
Featured in
See also
- phrozen rpg rapid resin smoke 1kg review
- creality pla plus filament review
- creality silk pla filament review
- sunlu 2000g abs like grey resin review
- sunlu high clear resin review
- SUNLU Standard Resin Plus Dark Grey 1kg Review (2026): A Spec-Based Look
- SUNLU 3kg Water Washable Resin Review: Specs, Pros and Cons
- SUNLU 1kg Nylon-Like Resin Review: Who It Fits and Who Should Skip It
- anycubic resin 3d printer review
- muiryn 51 stone resin review
