As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ELEGOO Neptune 3 Pro 235mm PEI Magnetic Plate Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This is ELEGOO's original spare build plate for the Neptune 3 Pro: a 235x235mm (9.25in) flexible spring steel sheet with powder-coated PEI on one side, plus a magnetic base sheet that sticks onto the heated bed. Because the base is included, it also works as a full upgrade for any printer with a 235x235mm bed that still uses bare aluminum or glass, which ELEGOO says it fits. Powder-coated PEI grips prints while the bed is warm and resists warping; once cool, you bend the steel to pop parts off. Only one side is coated, so it does not offer a second surface to flip to. This review draws on ELEGOO's listing and published specs.

What stands out

  • Original Neptune 3 Pro part
  • Magnetic base with adhesive included
  • Powder-coated PEI, one side

Who it fits

Good fit for

Neptune 3 Pro owners replacing a worn sheet, and owners of other 235x235mm-bed printers who want a magnetic flexible system in one box.

Who should skip it

Owners who want two usable sides, a smooth PEI finish, or a bed of a different size.

Verdict: A dependable factory spare that doubles as a complete 235mm magnetic upgrade.

ELEGOO PEI plate specs

235 x 235mm (9.25in)

Neptune 3 Pro bed size.

Spring steel, flexible

Bend to release parts.

Powder-coated PEI, one side

Textured, heat resistant.

Magnetic base, adhesive

Sticks to the heated bed.

Fits most 235mm beds

Per ELEGOO.

Thickness

Not stated.

Base sheet plus steel top

The kit has two layers: an adhesive magnetic sheet that stays on the heater and the PEI-coated steel that sits on top. On a Neptune 3 Pro that already has a base you can reuse it and keep the new one as a spare. On another printer, peel off any old surface, clean the bed and stick the magnet down flat, without bubbles.

Day-to-day with textured PEI

Wipe the surface with isopropyl alcohol between prints and re-level after fitting. Wait for the bed to cool before flexing the sheet, and avoid bending it sharply. Pick this ELEGOO plate for a guaranteed Neptune 3 Pro fit with the base included; pick a double-sided sheet if you want a spare surface on the back.

Before you order

Checks for the ELEGOO 235mm PEI plate.

Check before you buy

  • Your bed is 235 x 235mm
  • You are fine with one coated side
  • You can stick down a magnetic base flat if needed
  • You will re-level after fitting

The product at a glance

ELEGOO 235x235mm PEI Magnetic Build Plate

Best for: Neptune 3 Pro and 235mm beds

Primary Material
Spring Steel
Dimensions
235x235mm
Build Surface Type
PEI
Build Plate Material
PEI, Spring Steel

View on Amazon: ELEGOO 235x235mm PEI Magnetic Build Plate Affiliate link

ELEGOO original Neptune 3 Pro build plate: 235x235mm spring steel, one-sided powder-coated PEI, adhesive magnetic base included.

Pros

  • Factory Neptune fit
  • Magnetic base in the box
  • Flex release

Cons

  • One coated side only
  • Thickness not listed

Good fit if

  • You own a Neptune 3 Pro
  • Your 235mm bed lacks a magnetic system

Skip if

  • You want a double-sided sheet

Verdict: A factory spare and 235mm upgrade in one.

Specifications side by side

Spec ELEGOO 235x235mm PEI Magnetic Build Plate
Primary Material Spring Steel
Dimensions 235x235mm
Build Surface Type PEI
Build Plate Material PEI, Spring Steel
Build Plate Size 235x235mm

Frequently asked questions

Does the ELEGOO PEI plate fit the Neptune 3 Pro?

Yes, it is ELEGOO's original spare part for that printer.

Is a magnetic base included with the ELEGOO plate?

Yes, a magnetic bottom sheet that sticks onto the heated bed.

Is the plate double-sided?

No, the PEI coating is on one side.

Will it fit other printers?

ELEGOO says it fits most printers with a 235 x 235mm bed.

How are prints removed from the ELEGOO plate?

Bend the spring steel sheet once the bed has cooled.

See also