ELEGOO ABS-Like 3.0 Pro Clear Green Resin Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO ABS-Like 3.0 Pro is the upgraded version of the brand's popular ABS-Like 3.0 resin, sold here as a 1kg bottle in translucent clear green. ELEGOO claims three gains: better scratch resistance for parts that get handled, a heat deflection temperature about 10% above standard ABS-Like 3.0, and a tough, bendable cure that resists snapping. It is a standard photopolymer for MSLA, DLP and LCD printers and costs under $20. The clear green tint shows internal detail and suits display pieces; a black version is reviewed separately. Our source is ELEGOO's listing; we have not printed with this bottle.
What stands out
- Higher scratch resistance than 3.0
- About 10% higher heat deflection
- Flexes before breaking
- Translucent clear green
Who it fits
Good fit for
Resin printers making figures, miniatures, test fits and light functional parts that should survive handling, and anyone who wants a see-through green finish without painting.
Who should skip it
Engineers who need a published heat deflection figure, tensile data or exposure times: the listing gives a percentage, not a number. For opaque, paint-ready parts the grey or black versions show detail more clearly.
Verdict: A sensible upgrade over ABS-Like 3.0 for parts that get touched, if you accept vague specs.
What the claims mean
Scratch resistance
Surfaces scuff less with daily handling; ELEGOO gives no hardness value.
Heat deflection about 10% higher
Relative to ABS-Like 3.0, with no absolute temperature stated.
Bends rather than snaps
Thin parts and snap-fits are less brittle than standard resin, per ELEGOO.
405nm photopolymer, 1kg
Works on MSLA, DLP and LCD printers.
Listing gaps
There is no exposure table, viscosity, Shore hardness or tensile strength on the page, and the spec field lists the model as 'liquid-3d-printing-materials'. ELEGOO mentions good fluidity, high accuracy and minimal shrinkage in general terms only. Expect to dial in exposure with a calibration print.
Printing and finishing
Shake the bottle well, start from your printer's ELEGOO ABS-Like profile and adjust with a test matrix. ELEGOO gives no post-cure time, so cure in short steps and check the surface between them. Wear gloves and ventilate as with any resin.
Before you buy
Quick checks.
Check before you buy
- Your printer cures at 405nm
- You want translucent green parts
- You can calibrate exposure yourself
- You do not need datasheet numbers
The product at a glance
ELEGOO ABS-Like 3.0 Pro Resin 1000g
Best for: Translucent tough resin parts
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Precision, Non-Brittle
- Resin Type
- ABS-Like
- Dimensions
- 9.37 × 3.86 × 3.86 inches
View on Amazon: ELEGOO ABS-Like 3.0 Pro Resin 1000g Affiliate link
ELEGOO ABS-Like 3.0 Pro, 1kg clear green: more scratch-resistant and about 10% more heat-resistant than ABS-Like 3.0, tough and bendable, for MSLA/DLP/LCD printers.
Pros
- Tougher than standard resin
- Better scuff resistance
- Low price per kilo
Cons
- No exposure or datasheet numbers
- Heat gain stated only as a percentage
Good fit if
- You print handled figures or fixtures
- You like translucent green parts
Skip if
- You need published heat data
- You want opaque, paint-ready parts
Verdict: A tougher everyday resin with a see-through green look.
Specifications side by side
| Spec | ELEGOO ABS-Like 3.0 Pro Resin 1000g |
|---|---|
| Printing Technology | Resin |
| Compatible Material | ABS |
| Features | High Precision, Non-Brittle |
| Resin Type | ABS-Like |
| Dimensions | 9.37 × 3.86 × 3.86 inches |
| Size | M-1000g |
| Color | Clear Green |
| Model | liquid-3d-printing-materials |
Frequently asked questions
How much heat can ELEGOO ABS-Like 3.0 Pro take?
ELEGOO only says its heat deflection is about 10% higher than ABS-Like 3.0, without a number.
Is ELEGOO ABS-Like 3.0 Pro clear green see-through?
It is translucent green, so internal detail shows through.
What printers can use ELEGOO ABS-Like 3.0 Pro?
MSLA, DLP and LCD resin printers.
What is the difference between ELEGOO ABS-Like 3.0 and 3.0 Pro?
The Pro version is listed as more scratch resistant and about 10% more heat resistant.
Featured in
- 6 Best Black 3D Printer Resins, Compared
- Best Bulk SLA 3D Printer Resins, 2kg and Up: 7 Spec-Based Picks
- 5 Best Yellow 3D Printer Resins in 2026, Compared
- Best Abs-Like 3d Printer Accessories: 2 Spec-Based Picks
- Best 3D Printer Resins Under $50: 8 Spec-Based Picks
- Best 3D Printer Resins for ABS-Like Parts: 9 Spec-Based Picks
See also
- elegoo metal resin tank saturn review
- elegoo 3 PCs pfa release review
- elegoo 3d printer adhesive glue review
- elegoo 5pcs pfa film saturn review
- ELEGOO Mars 4/5 FEP Film 5-Pack Review (2026)
- ELEGOO Smart Mini Heater for Resin Printers Review (2026)
- ELEGOO Mars 4/5 FEP Liner Film 3-Pack Review (2026)
- ELEGOO Neptune 3 Pro 235mm PEI Magnetic Plate Review (2026)
- elegoo saturn 3 12k resin 3d printer review
- eero like new amazon eero pro review
