ELEGOO Mars 4 Metal Resin Tank Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO sells the original resin tank of the Mars 4 LCD printer as a spare, with the FEP release film already tensioned in place. The body is aluminum alloy, it bolts down with screws that hold it level during printing, and small feet underneath keep the film from touching the bench when the vat is out of the machine. It is the part to buy when a vat frame is bent or damaged, or when you want a second vat so one resin can stay loaded while you print another. Fit is the Mars 4 only. Our information comes from ELEGOO's listing.
What stands out
- FEP film pre-installed
- Aluminum alloy body
- Feet protect the film
Who it fits
Good fit for
Mars 4 owners who want a spare vat for a second resin, or a replacement for a damaged tank.
Who should skip it
Owners of the Mars 4 Ultra, Mars 5 or other printers, and anyone who only needs fresh FEP film.
Verdict: An easy way to keep two resins ready on a Mars 4.
Mars 4 vat specs
Mars 4 LCD fit
Original tank for that printer.
FEP film installed
Ready to fill.
Aluminum alloy
Sturdy frame.
Feet on the base
Film stays off the bench.
Allen wrench
Included for fitting.
Capacity
Not listed.
Two-vat workflow
With the film already fitted, the Mars 4 vat can go straight into service. Many resin users keep one tank for grey model resin and another for a clear or tough resin, covering the spare with its lid or foil between jobs. The feet are a small but useful detail, since a scratched FEP leaks resin onto the screen. ELEGOO does not list the fill volume or the film thickness.
Changing tanks on the Mars 4
Lift the build plate, undo the vat screws, swap tanks and tighten them evenly so the vat sits flat. Check the FEP for dents before the first print. Pick this tank if the frame itself is damaged or you want a second resin ready; buy FEP sheets alone if only the film is worn.
Before you order
Checks for the ELEGOO Mars 4 resin tank.
Check before you buy
- Your printer is the Mars 4 LCD model
- You need a whole vat, not just film
- You have a place to store a filled spare vat
- You can tighten it evenly with the Allen key
The product at a glance
ELEGOO Mars 4 Metal Resin Tank with FEP
Best for: Mars 4 spare or second resin
- Primary Material
- aluminum alloy
- Release Film Type
- FEP
- Printing Technology
- LCD
- Dimensions
- 10 × 6.93 × 2.8 inches
View on Amazon: ELEGOO Mars 4 Metal Resin Tank with FEP Affiliate link
Original ELEGOO Mars 4 vat: aluminum body, FEP fitted, feet under the base, Allen wrench in the box.
Pros
- Ready to use out of the box
- Lets you keep a second resin loaded
- Feet guard the film
Cons
- Mars 4 only
- Capacity not listed
Good fit if
- You own a Mars 4
- Your vat frame is damaged
Skip if
- You only need replacement FEP
Verdict: A factory vat for Mars 4 owners.
Specifications side by side
| Spec | ELEGOO Mars 4 Metal Resin Tank with FEP |
|---|---|
| Primary Material | aluminum alloy |
| Release Film Type | FEP |
| Printing Technology | LCD |
| Dimensions | 10 × 6.93 × 2.8 inches |
| Size | Mars 4 Resin Tank |
Frequently asked questions
Does the ELEGOO tank fit the Mars 4 Ultra or Mars 5?
The listing names the Mars 4 LCD only.
Is FEP film already on the Mars 4 tank?
Yes, the film comes pre-installed.
What is the Mars 4 resin tank made of?
Aluminum alloy.
What do the feet under the Mars 4 vat do?
They keep the FEP film off the bench.
How much resin does the Mars 4 vat hold?
ELEGOO does not state a capacity.
See also
- elegoo mars 5 ultra 9k mono LCD review
- elegoo saturn 4 12k LCD screen review
- elegoo mars 4 dlp build plate review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- elegoo mars 5 msla resin 3d printer review
- bykski durable metal 4 channel review
