6 Best 235x235mm Build Plates for 3D Printers, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
235x235mm is the bed size of the Ender 3 family, the K1 and K1C, the Neptune 3 Pro and 4, and the Adventurer 5M, so one plate here can fit several machines. Our top pick is the BIQU CryoGrip Pro Glacier: a 7-layer coating for grip, a strong magnet and a handle that stays cool at a 100℃ bed. Comgrow's textured PEI sheet with magnetic base is the cheapest pick. You also get ELEGOO's original Neptune 3 Pro PEI, an IdeaFormer-3D PEO and PET plate, Creality's carborundum glass and a 2-pack of Creality PC surfaces for PLA. All 6 were chosen from the sellers' published specs.
Our top pick: BIQU CryoGrip Pro Glacier 235x235mm Plate.
Quick picks
The best fit for you
- You want the best grip on a K1C or Ender 3 BIQU CryoGrip Pro Glacier 235x235mm Plate BIQU Glacier, 7-layer coating.
- You want the cheapest textured PEI Comgrow Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet | Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/V2 Neo Comgrow with magnet.
- You own a Neptune 3 Pro ELEGOO 235x235mm PEI Magnetic Build Plate Original ELEGOO PEI.
- You want patterned bottoms IdeaFormer-3D Smooth PEO PET Build Plate 235x235mm, PEO PET Spring Steel Bed Plate for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/for Elegoo Neptune 3/Neptune 4 Pro 3D Printer Platform PEO and PET faces.
- Your Ender 3 Pro bed is warped Creality Official Ender 3 Glass Bed 3D Printer Platform, 235x235MM Tempered Glass Plate Build Surface for Ender 3 PRO/Ender 5 PRO/Ender 3 S1/Ender 3 Neo/Ender 3 V2 Neo, Good Adhesion Remove Easily Flat carborundum glass.
- You print only PLA Creality 235x235mm Flexible Magnetic PC Bed 2-Pack Two PC magnetic sheets.
Our 6 picks
BIQU CryoGrip Pro Glacier 235x235mm Plate
Best for: Best overall
- Build Plate Size
- ✓ 235x235mm
- Primary Material
- Spring Steel
- Dimensions
- 235x235mm
- Build Surface Type
- Fine Textured
View on Amazon: BIQU CryoGrip Pro Glacier 235x235mm Plate Affiliate link
BIQU CryoGrip Pro Glacier 235x235mm double-sided plate: a 7-layer cobalt oxide coating for strong first-layer grip, a strong magnetic substrate and a hollow handle that stays cool at a 100℃ bed; listed for Ender-3, Ender-5, K1, K1C, Adventurer 5M, Kobra and Neptune 3 Pro and 4.
Pros
- Grippy multi-layer coating
- Cool-touch handle
- Very wide 235mm fit list
Cons
- Priciest 235mm pick
- No per-filament temperatures
Good fit if
- You print PETG and want parts to stay put on a K1C
- You own several 235mm printers
Skip if
- You want a glossy underside
Verdict: The premium 235mm plate for most brands.
Comgrow Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet | Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/V2 Neo
Best for: Best budget
- Build Plate Size
- ✓ 235x235mm
- Build Plate Material
- PEI, Spring Steel
Comgrow 235x235mm textured PEI spring steel sheet with a strong magnetic base, two handles and positioning holes, for Ender 3 V3 KE and SE, K1, K1C, Neptune 3 Pro, 4 and 4 Pro.
Pros
- Cheapest pick here
- Magnetic base included
- Handles and locating holes
Cons
- One textured side
- Bullets also mention a PEO side, the title does not
Good fit if
- Your Ender 3 V3 SE PEI is worn
- You want a cheap K1C spare
Skip if
- You need a smooth face
Verdict: Low-cost textured PEI for 235mm beds.
ELEGOO 235x235mm PEI Magnetic Build Plate
Best for: Best for Neptune
- Build Plate Size
- ✓ 235x235mm
- Primary Material
- Spring Steel
- Dimensions
- 235x235mm
- Build Surface Type
- PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: ELEGOO 235x235mm PEI Magnetic Build Plate Affiliate link
ELEGOO's original 235x235mm PEI plate for the Neptune 3 Pro: one powder-coated PEI side on flexible spring steel, a magnetic base sheet, and a fit for most 235mm beds.
Pros
- Official ELEGOO part
- Magnetic base included
Cons
- Single PEI side
Good fit if
- Your Neptune 3 Pro plate is scratched
- You want the stock surface back
Skip if
- You want two faces
Verdict: ELEGOO's factory 235mm PEI.
IdeaFormer-3D Smooth PEO PET Build Plate 235x235mm, PEO PET Spring Steel Bed Plate for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/for Elegoo Neptune 3/Neptune 4 Pro 3D Printer Platform
Best for: Best patterned finish
- Build Plate Size
- ✓ 235x235mm
- Build Plate Material
- Spring Steel, PEO
- Surface Finish
- Smooth
IdeaFormer-3D 235x235mm PEO and PET plate: diamond-look PEO on one side and carbon fiber PET on the other, rated to 150℃, for Ender 3, Ender 3 V2, Ender 5 and Neptune 2, 3, 3 Pro and 4 Pro; no magnetic base in this version.
Pros
- Two decorative faces
- 150℃ rating stated
Cons
- No magnet included
- Low stock
Good fit if
- You print PLA signs and gifts on an Ender 3 V2
- Your bed already has a magnetic sticker
Skip if
- You print ABS
Verdict: Diamond and carbon patterns for 235mm beds.
Creality Official Ender 3 Glass Bed 3D Printer Platform, 235x235MM Tempered Glass Plate Build Surface for Ender 3 PRO/Ender 5 PRO/Ender 3 S1/Ender 3 Neo/Ender 3 V2 Neo, Good Adhesion Remove Easily
Best for: Best glass bed
- Build Plate Size
- ✓ 235x235mm
Creality's official 235x235mm carborundum glass bed for Ender-3, Ender-3 Pro, V2 and S1, Ender-5 and CR-20: an 8 Mohs scratch-resistant coating, 0.15mm flatness, and prints that release as the glass cools.
Pros
- Very flat 0.15mm surface
- Scratch-resistant coating
Cons
- Glass cannot flex to release parts
- Low stock
Good fit if
- Your Ender 3 Pro bed is warped
- You want a flat, glossy bottom
Skip if
- You want bend-to-release removal
Verdict: A flat glass top for older Enders.
Creality 235x235mm Flexible Magnetic PC Bed 2-Pack
Best for: Best soft magnetic
- Build Plate Size
- ✓ 235x235mm
- Dimensions
- 235 x 235mm
- Maximum Temperature
- 70 ° C
View on Amazon: Creality 235x235mm Flexible Magnetic PC Bed 2-Pack Affiliate link
Creality 2-pack of 235x235mm PC frosted magnetic build surfaces with peel-and-stick magnetic bases, for Ender 3, Ender 3 V2, Neo and S1; Creality lists PLA and PLA blends.
Pros
- Two surfaces in the box
- Peel-and-stick install
Cons
- PLA-type filaments only
- Softer than spring steel
Good fit if
- You print PLA on an Ender 3 Neo and want spares
- You want a cheap flexible surface
Skip if
- You print PETG or ABS
Verdict: Two soft PLA surfaces for Enders.
Specifications side by side
| Spec | BIQU CryoGrip Pro Glacier 235x235mm Plate | Comgrow Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet | Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/V2 Neo | ELEGOO 235x235mm PEI Magnetic Build Plate | IdeaFormer-3D Smooth PEO PET Build Plate 235x235mm, PEO PET Spring Steel Bed Plate for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/for Elegoo Neptune 3/Neptune 4 Pro 3D Printer Platform | Creality Official Ender 3 Glass Bed 3D Printer Platform, 235x235MM Tempered Glass Plate Build Surface for Ender 3 PRO/Ender 5 PRO/Ender 3 S1/Ender 3 Neo/Ender 3 V2 Neo, Good Adhesion Remove Easily | Creality 235x235mm Flexible Magnetic PC Bed 2-Pack |
|---|---|---|---|---|---|---|
| Primary Material | Spring Steel | not stated | Spring Steel | not stated | not stated | not stated |
| Dimensions | 235x235mm | not stated | 235x235mm | not stated | not stated | 235 x 235mm |
| Maximum Temperature | not stated | not stated | not stated | not stated | not stated | 70 ° C |
| Build Surface Type | Fine Textured | not stated | PEI | not stated | not stated | not stated |
| Build Plate Material | Spring Steel | PEI, Spring Steel | PEI, Spring Steel | Spring Steel, PEO | not stated | not stated |
| Build Plate Size | 235x235mm | 235x235mm | 235x235mm | 235x235mm | 235x235mm | 235x235mm |
| Surface Finish | Textured | not stated | not stated | Smooth | not stated | not stated |
| Size | Ender3 (235×235mm) | 235*235 for Ender 3 V3 SE | not stated | 235x235mm | Ender 3/3 V2 | Ender 3/3 V2 |
| Color | Glacier-Original | not stated | not stated | PEO PET (No Magnetic Plate) | Carborundum Glass Black | PC Frosted Black*2 |
| Model | not stated | E3V3PEI | not stated | not stated | not stated | 3D-magnetic bed 2pcs |
How to choose a 235x235mm build plate
-
Check what comes with it
Comgrow, ELEGOO and Creality's PC surfaces include a magnetic base; the IdeaFormer-3D PEO and PET plate does not.
-
Respect the PLA-only surfaces
Creality lists PLA and PLA blends for its PC sheets; IdeaFormer-3D caps its plate at 150℃.
-
Clean glass with water
Creality recommends warm water for its glass bed and no metal scrapers.
-
One plate, several printers
BIQU lists Ender-3, Ender-5, K1, K1C, Adventurer 5M, Kobra and Neptune printers for its 235mm Glacier.
Frequently asked questions
Which printers use a 235x235mm bed?
Listings here name the Ender 3 and Ender 5 families, K1 and K1C, Neptune 3 Pro and 4, Adventurer 5M and Kobra.
How hot does the BIQU Glacier handle get?
BIQU says it only warms slightly with the bed at 100℃.
Can the Creality PC magnetic surface print PETG?
Creality lists PLA and PLA blends only.
How flat is the Creality carborundum glass bed?
Creality lists 0.15mm flatness.
Does the IdeaFormer-3D 235mm PEO plate include a magnet?
No, this version comes without the magnetic plate.
See also
- best ACF films for resin 3d printers
- best 257x257mm build plates for bambu lab
- best direct drive upgrades for 3d printers
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best infrared sauna accessories
- best laser printers with scan





