ELEGOO Neptune 4 Plus/Max Hotend Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's own replacement hot end for the Neptune 4 Plus and Neptune 4 Max arrives fully assembled, all-metal, with a nozzle already threaded in. That makes it the simplest fix when the large-format Neptune 4 machines clog beyond cleaning or a heater or thermistor fails: you swap the whole unit instead of rebuilding it. ELEGOO limits the fit to those two printers only, so the standard Neptune 4 and Neptune 4 Pro need a different part. The listing is short: it gives no nozzle size, no maximum temperature and no parts breakdown, and it notes that leftover filament from a factory check may sit inside. Our notes rely on ELEGOO's product page alone.
What stands out
- Fully assembled, nozzle fitted
- All-metal construction
- Factory part for Neptune 4 Plus and 4 Max
Who it fits
Good fit for
Neptune 4 Plus or 4 Max owners with a jammed, leaking or failed hot end who want the factory part in one piece.
Who should skip it
Owners of the standard Neptune 4 or 4 Pro, and anyone who wants a stated nozzle size or a high-temperature rating before buying.
Verdict: The quickest like-for-like hot end repair for the big Neptune 4 models, with thin listing details.
Neptune 4 Plus/Max hotend: what the listing states
Fits Neptune 4 Plus, 4 Max
ELEGOO says these two only.
Fully assembled
Heater, sensor and nozzle in place.
All-metal hot end
No PTFE liner mentioned.
Nozzle included
Diameter not listed.
Max temperature
Not stated.
Factory filament check
Some filament may remain inside.
A complete unit, not a parts bag
Because the heater block, nozzle and wiring come as one assembly, the job is unplugging the old head and fitting this one rather than threading a throat and torquing a nozzle hot. The trade-off is that the listing does not say which sensor or heater type is inside, so you cannot buy matching spares from it alone. If you only need nozzles, a separate Neptune 4 Plus/Max nozzle set costs far less than a whole hot end.
After fitting the Neptune 4 Plus/Max hot end
Expect a short purge before the first print, since a little filament from ELEGOO's factory run can still be in the melt zone. Run the printer's PID or auto-calibration routine and re-check the Z offset, as a new nozzle tip rarely sits at exactly the old height. Choose this kit if the heater or sensor side has failed; choose loose nozzles if only the tip is worn or clogged.
Check before ordering
Points for the ELEGOO Neptune 4 Plus/Max hot end.
Check before you buy
- Your printer is a Neptune 4 Plus or Neptune 4 Max
- You do not need a stated nozzle diameter
- You can redo the Z offset after the swap
- A whole hot end, not just a nozzle, has failed
The product at a glance
ELEGOO Neptune 4 Plus and Max Assembled Hotend Kit
Best for: Neptune 4 Plus and 4 Max repairs
- Features
- Fully Assembled
View on Amazon: ELEGOO Neptune 4 Plus and Max Assembled Hotend Kit Affiliate link
Assembled ELEGOO all-metal hot end with nozzle for the Neptune 4 Plus and 4 Max; nozzle size and temperature limit not listed.
Pros
- Drop-in factory assembly
- Covers both large Neptune 4 models
- Nozzle already fitted
Cons
- No nozzle size given
- No temperature rating listed
Good fit if
- You run a Neptune 4 Plus or 4 Max
- The heater or sensor side failed
Skip if
- Your machine is a standard Neptune 4 or 4 Pro
Verdict: A plug-in fix for the large Neptune 4 printers.
Specifications side by side
| Spec | ELEGOO Neptune 4 Plus and Max Assembled Hotend Kit |
|---|---|
| Features | Fully Assembled |
Frequently asked questions
Does the ELEGOO kit fit the standard Neptune 4 or 4 Pro?
No. ELEGOO lists the Neptune 4 Plus and Neptune 4 Max only.
Is the Neptune 4 Plus/Max hot end pre-built?
Yes, it ships fully assembled with a nozzle installed.
Why is there filament inside a new ELEGOO hot end?
ELEGOO runs each kit with filament before shipping, so a little may remain.
What nozzle size comes on the Neptune 4 Max hot end?
ELEGOO leaves the Neptune 4 Max nozzle size off the page.
Is the ELEGOO Neptune 4 Plus hot end all-metal?
Yes, ELEGOO describes it as an all-metal hot end.
Featured in
See also
- elegoo saturn 3 ultra build plate review
- elegoo mars 4 metal resin tank review
- elegoo mars 5 ultra 9k mono LCD review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- elegoo saturn 4 12k resin 3d printer review
- sabrent 1tb rocket 4 plus review
