ELEGOO Mars 4/5 FEP Liner Film 3-Pack Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ELEGOO 3-pack FEP Release Liner Film gives you three 206x146mm sheets, 0.15mm thick, for the Mars 4, Mars 5 and Mars 5 Ultra, and it is the smaller, cheaper way to keep spare film from the printer's own maker. If you print a few times a month, three sheets will likely last a long while; FEP is only replaced when it tears, clouds or gets scratched. ELEGOO lists 95% UV transmittance, a non-stick surface that resists resin and UV aging, and quick installation. Size, thickness and fit match ELEGOO's 5-sheet pack, so the choice is just how many you need. Figures here are ELEGOO's own, taken from the listing.
What stands out
- 3 sheets, 206 x 146mm
- 0.15mm, 95% UV transmittance
- Fits Mars 4 / 5 / 5 Ultra
Who it fits
Good fit for
Mars 4, Mars 5 or Mars 5 Ultra owners who print occasionally and want one or two spares ready for a torn film.
Who should skip it
Heavy users who would be better served by a bigger pack, owners of other printers, or anyone moving to PFA film.
Verdict: A small, low-cost spare pack for occasional Mars printers.
ELEGOO 3-pack FEP details
3 sheets
For occasional changes.
206 x 146mm
Matches Mars 4/5 vats.
0.15mm
Standard FEP thickness.
95% UV transmittance
As listed.
Resin and UV resistant
Per listing.
Fit list
Mars 4, Mars 5, Mars 5 Ultra.
Liner film basics
Each resin layer cures against this film and peels away as the plate lifts, so the film must stay clear, flat and tight. ELEGOO describes its sheets as wrinkle-free and bubble-free. Only the three Mars models are named; other printers with the same vat size are not mentioned.
Keeping a Mars vat healthy
Filter resin after a failed print so cured flakes do not press holes in the film, and clean the underside with isopropyl alcohol and a soft cloth. When fitting a new sheet, tension it evenly before trimming. Pick this 3-pack if you print a few times a month; pick the 5-sheet version if you run your Mars most days.
Before you order
Checks for the ELEGOO 3-pack FEP film.
Check before you buy
- Your printer is a Mars 4 or one of the Mars 5 models
- Three spares fit how often you print
- You have the vat screws and a driver to change film
- You want ELEGOO's own FEP, not PFA
The product at a glance
ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack)
Best for: Occasional Mars printing
- Dimensions
- 206mm*146mm
- Release Film Type
- FEP
- Film Thickness
- 0.15mm
- Printing Technology
- Resin
View on Amazon: ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack) Affiliate link
ELEGOO 3-pack FEP liner film, 206x146x0.15mm, 95% UV transmittance, for Mars 4, Mars 5 and Mars 5 Ultra.
Pros
- Exact Mars vat size
- Low entry price
- Maker's own film
Cons
- Only three sheets
- Mars models only
Good fit if
- You print occasionally
- You own a Mars 4 or 5
Skip if
- You print daily
Verdict: A small spare pack for Mars vats.
Specifications side by side
| Spec | ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack) |
|---|---|
| Dimensions | 206mm*146mm |
| Release Film Type | FEP |
| Film Thickness | 0.15mm |
| Printing Technology | Resin |
| Size | 3PCS-Mars 4/5/5 Ultra FEP |
| Color | Mars 4/5/5 Ultra FEP |
Frequently asked questions
Which ELEGOO printers does the 3-pack FEP fit?
The ELEGOO Mars 4, Mars 5 and Mars 5 Ultra, per the listing.
How many sheets are in the 3-pack?
Three FEP sheets.
What is the film size and thickness?
206 x 146mm, 0.15mm.
Is the 3-pack the same film as the 5-pack?
Size, thickness, transmittance and fit match; only the sheet count differs.
How often should Mars FEP be changed?
When it tears, clouds or scratches; there is no set schedule.
See also
- elegoo neptune 3 pro 235mm pei magnetic plate review
- elegoo neptune 4 plus max hotend kit review
- elegoo saturn 3 ultra build plate review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- xebec tri screen 3 PCs review
- zhiyun 3 PCs colorful knivies review
