Comgrow 24-Piece MK8 Brass Nozzle Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Comgrow 24-piece kit is mainly a stock of sixteen 0.4mm MK8 brass nozzles, plus two each of 0.2mm, 0.6mm, 0.8mm and 1mm for trying fine detail or fast, thick layers. It also includes nozzle cleaning needles, a hex wrench, stainless tweezers and a storage box. Comgrow lists it for the Ender 3, Ender 3 Pro, V2, Max, Neo, S1 and S1 Pro, the Ender 5 Pro and the CR-10 series, all running 1.75mm filament. Brass is right for PLA, PETG and ABS, but it wears quickly with carbon fiber, glow-in-the-dark or other abrasive filament. Nozzle sizes and claims here come straight from the Comgrow listing.
What stands out
- 24 brass MK8 nozzles
- Sixteen 0.4mm + four other sizes
- Needles, wrench, tweezers, box
Who it fits
Good fit for
Creality Ender and CR-10 owners who change nozzles after clogs, or who want to try 0.2mm detail and 0.6-1mm fast printing without buying sizes one at a time.
Who should skip it
Anyone printing carbon fiber or glow filament (brass wears), or printers that do not take MK8 nozzles, such as Bambu Lab or Prusa.
Verdict: A cheap, well-stocked MK8 spares box for Creality owners.
Comgrow nozzle kit contents
0.4mm x16
The stock size, most spares.
0.2mm x2
Fine detail, slow.
0.6mm x2, 0.8mm x2
Faster, stronger lines.
1.0mm x2
Very thick layers.
Diameter error under 0.02mm
Listed precision.
Needles, hex wrench, tweezers
Basic upkeep tools.
Brass MK8 nozzles explained
MK8 is the M6-threaded nozzle used on most Creality hotends. Brass conducts heat well and is cheap, which is why it ships as stock, but it is soft. The listing claims a smooth inner bore and diameter error under 0.02mm; it gives no thread length, so compare against your current nozzle if you use an all-metal hotend.
Changing an MK8 nozzle
Heat the hotend to printing temperature, hold the heater block with the wrench and unscrew the nozzle, then tighten the new one while hot so it seals against the heat break. Change the slicer's line width when you move off 0.4mm. Pick this kit if you mostly need 0.4mm spares and want to test other sizes; pick a hardened steel nozzle instead for abrasive filament.
Before you order
Checks for the Comgrow MK8 nozzle kit.
Check before you buy
- Your hotend takes MK8 (M6) nozzles
- You print 1.75mm non-abrasive filament
- You have a wrench to hold the heater block
- You will adjust line width for new sizes
The product at a glance
Comgrow 24PCS MK8 Brass Nozzles
Best for: Creality nozzle spares
- Primary Material
- Brass
- Nozzle Diameter
- 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm
View on Amazon: Comgrow 24PCS MK8 Brass Nozzles Affiliate link
Comgrow 24-piece MK8 brass nozzle kit: 16x 0.4mm plus 0.2/0.6/0.8/1mm pairs, needles, wrench, tweezers, box; Ender and CR-10 fit.
Pros
- Many 0.4mm spares
- Five sizes to experiment
- Tools and box included
Cons
- Brass, not for abrasives
- Only MK8 hotends
Good fit if
- You own an Ender or CR-10
- You clog nozzles now and then
Skip if
- You print carbon fiber filament
Verdict: A well-stocked MK8 spares box.
Specifications side by side
| Spec | Comgrow 24PCS MK8 Brass Nozzles |
|---|---|
| Primary Material | Brass |
| Nozzle Diameter | 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm |
Frequently asked questions
What sizes are in the Comgrow MK8 kit?
Sixteen 0.4mm, and two each of 0.2mm, 0.6mm, 0.8mm and 1mm.
Which printers fit these Comgrow nozzles?
Ender 3 models including V2, Max, Neo, S1 and S1 Pro, Ender 5 Pro and CR-10 series, per the listing.
Are the Comgrow nozzles good for carbon fiber filament?
No; brass wears quickly with abrasive filament.
What tools come with the nozzles?
Cleaning needles, a hex wrench, stainless tweezers and a storage box.
What filament diameter do they take?
1.75mm.
Featured in
See also
- comgrow creality hi double sided pei plate review
- simax3d bmg dual drive bowden extruder review
- skouphy large 3d printer enclosure tent review
- comgrow 235mm magnetic build surface review
- comgrow 235mm peo pei build plate review
- Comgrow 25-Piece MK8 0.4mm Brass Nozzle Kit Review: Specs, Pros and Cons
- Creality CR Touch Auto Bed Leveling Kit Review: Who It Fits and Who Should Skip It
- Comgrow 235x235mm Textured PEI Spring Steel Sheet Review (2026)
- best comgrow 3d printers
- easycargo 30pcs 3d printer heatsink review
