As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Skouphy Large 3D Printer Enclosure Tent Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Skouphy Large Enclosure is a foldable tent, 750x700x900mm (29.5x27.5x35.4in), with an iron pipe frame, a flame retardant outer fabric and a pure aluminum film lining. Its job is to hold heat around the printer so cold drafts do not warp ABS, ASA or large PLA parts, and to keep dust off and cut noise a little. Skouphy lists the Ender 3 V2, Ender 5, 5 Pro and 5 Plus, CR-10, CR-10 V2, 10S, 10S Pro, 10 Mini, CR-X and CR-20, and states it is not for the CR-10 Max, S4 or S5. The listing title uses the Creality name, but the product comes from Skouphy. We compiled this from the listing and published specs, without hands-on testing.

What stands out

  • 750 x 700 x 900mm interior size
  • Aluminum film lining, flame retardant outer
  • Folds for storage

Who it fits

Good fit for

Owners of Ender 3 V2, Ender 5 or CR-10 size printers who print ABS/ASA, work in a cold room or garage, or want less dust on the machine.

Who should skip it

CR-10 Max, S4 or S5 owners, anyone needing a vented or filtered enclosure for fumes, or resin printer users.

Verdict: A roomy, low-cost tent for Creality bed slingers; measure your printer first.

Skouphy enclosure specs

750 x 700 x 900mm

29.5 x 27.5 x 35.4in.

Iron pipe frame

Holds the tent shape.

Aluminum film lining

Reflects heat back in.

Flame retardant outer

Listed to melt rather than burn.

Front zip access

Plus tool pockets.

Not for CR-10 Max/S4/S5

Too large.

Fire safety and build

Skouphy says the inner aluminum film and flame retardant outer will melt rather than catch fire and should not spread flames. That is a material claim from the seller, with no certification named, so keep a smoke alarm nearby and never leave a printer unattended for long. The tent has no fan, filter or pass-through listed.

Living with a printer tent

Leave room behind the printer for the spool and the bed's travel; bed slingers like the Ender 3 V2 move the bed front to back. A closed tent warms up during long prints, which helps ABS but can soften PLA near the extruder, so unzip the front a little for PLA in a warm room. Pick this tent for warmth and dust control; pick a hard enclosure with a filter if fumes are the concern.

Before you order

Checks for the Skouphy Large enclosure.

Check before you buy

  • Your printer is on the fit list and not a CR-10 Max, S4 or S5
  • You have about 750 x 700mm of floor or bench space
  • You will route power and spool inside
  • You do not need fume filtering

The product at a glance

Skouphy Large Fireproof 3D Printer Enclosure

Best for: ABS on Ender and CR-10

Dimensions
750x700x900mm
Color
Black

View on Amazon: Skouphy Large Fireproof 3D Printer Enclosure Affiliate link

Skouphy Large foldable enclosure tent, 750x700x900mm, iron frame, aluminum film lining, flame retardant outer; Ender 3 V2/5, CR-10, CR-20 fit.

Pros

  • Roomy interior
  • Heat-reflecting lining
  • Folds away

Cons

  • No fan or filter
  • Not for CR-10 Max/S4/S5

Good fit if

  • You print ABS or ASA
  • Your room is cold or dusty

Skip if

  • You need fume extraction

Verdict: A warm, simple tent for Creality bed slingers.

Specifications side by side

Spec Skouphy Large Fireproof 3D Printer Enclosure
Dimensions 750x700x900mm
Color Black
Size Large(27.6*29.5*35.4")
Model Creality Large Enclosure Tent

Frequently asked questions

Which printers fit the Skouphy Large enclosure?

Ender 3 V2, Ender 5/5 Pro/5 Plus, CR-10/10 V2/10S/10S Pro/10 Mini, CR-X and CR-20, per the listing.

How big is the Skouphy enclosure?

750 x 700 x 900mm (29.5 x 27.5 x 35.4in).

Is the Skouphy enclosure fireproof?

It uses flame retardant fabric and an aluminum film lining that the seller says melts without burning; no certification is listed.

Does it have a fan or filter?

None is listed.

Can it be folded away?

Yes, it folds for storage.

See also