Comgrow 235x235mm Magnetic Build Surface Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is a printer accessory: a 235x235mm magnetic bed cover sold under the Comgrow brand, though the listing title calls it the Creality Original Ultra Removable surface. It has two layers, a soft magnetic sticker that goes on the heated bed and a top sheet that clings to it and lifts off with your print. Priced at $9.99, it lets you replace a worn or scratched cover on an Ender 3 family printer or an Ender 5 Pro. The listing is short and gives no material or temperature limits; this review sticks to what it states.
What stands out
- $9.99 for a replacement cover
- Two-part magnetic design
- Sized 235x235mm
- Fits Ender 3 series and Ender 5 Pro
Who it fits
Good fit for
Owners of Ender 3 machines (the base model plus Pro, V2, V2 Neo, S1 and S1 Pro) or an Ender 5 Pro whose original magnetic sheet is worn, peeling or damaged.
Who should skip it
Look elsewhere for beds other than 235x235mm, or if you want a spring steel PEI sheet; this listing does not describe one.
Verdict: An inexpensive like-for-like replacement for Ender-style magnetic beds, with little detail beyond fit and fitting steps.
Build surface specs in plain terms
235x235mm (9.25 x 9.25 in)
Matches the bed size of the listed Ender models.
0.08 in thick, 8.82 oz
Thin and light; adds little height, though you should re-level after fitting.
Magnetic sticker + top layer
The base sticks to the bed for good; the top layer comes off to release prints.
1-pack, black, model NEW-RCTT-FBA-1
One full set per order.
How it is put together
The bottom part is a soft magnetic sticker with adhesive, and the upper layer is attracted to it. The listing does not name the top surface material, its temperature rating or the filaments it suits, so check those with the seller if you print ABS or high-temperature materials.
Fitting it correctly
Before peeling the backing, place the top layer on the magnetic sticker and confirm they hold together. If they push apart, turn one piece 90 degrees and try again until they lock firmly. Only then stick the bottom part onto the clean heated bed, keeping that orientation. Re-level the bed afterwards, then lift the top sheet off to free finished prints.
Before you buy this magnetic surface
Fit is simple to confirm; materials are not.
Check before you buy
- Your bed is 235x235mm
- Your Ender model appears in the fit list
- You can re-level after installing
- You will ask about temperature limits if printing ABS
The product at a glance
Comgrow 235x235mm Magnetic Build Surface
Best for: Replacing a worn Ender bed cover
- Dimensions
- 235X235mm
- Color
- Black
- Weight
- 8.82 ounces
View on Amazon: Comgrow 235x235mm Magnetic Build Surface Affiliate link
A $9.99, 235x235mm two-layer magnetic bed cover for Ender 3 series and Ender 5 Pro printers, sold by Comgrow under a Creality Original listing title.
Pros
- Very low price
- Clear fit list for Ender models
- Top layer lifts off to free prints
Cons
- No surface material named
- No temperature rating
- Magnet orientation must be checked first
Good fit if
- Your Ender's magnetic cover is worn
- You want a cheap like-for-like swap
Skip if
- You want a PEI spring steel upgrade
- You own a non-235mm bed
Verdict: A cheap replacement magnetic cover for 235mm Ender beds.
Specifications side by side
| Spec | Comgrow 235x235mm Magnetic Build Surface |
|---|---|
| Dimensions | 235X235mm |
| Color | Black |
| Build Plate Size | 235x235mm |
| Weight | 8.82 ounces |
| Size | 1-Pack |
| Model | NEW-RCTT-FBA-1 |
Frequently asked questions
Is it Comgrow or Creality?
It is sold under the Comgrow brand, while the listing title names it Creality Original.
Which printers does it fit?
The Ender 5 Pro and the Ender 3 line: original, Pro, V2, V2 Neo, S1 and S1 Pro.
What if the two layers repel each other?
Rotate one by 90 degrees until they attract fully, then stick the base down.
What is the maximum temperature?
The listing does not state one.
See also
- comgrow silk tri color pla filament review
- comgrow 235mm peo pei build plate review
- comgrow petg filament review
- comgrow 25pcs mk8 ender 3 review
- Creality CR Touch Auto Bed Leveling Kit Review: Who It Fits and Who Should Skip It
- Comgrow 235x235mm Textured PEI Spring Steel Sheet Review (2026)
- Comgrow 24-Piece MK8 Brass Nozzle Kit Review (2026)
- Comgrow Creality Hi Double-Sided PEI Plate Review (2026)
- comgrow creality k1 max 3d printer review
- sandisk ultra 3d nand 1tb review
