As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SIMAX3D BMG Dual Drive Bowden Extruder Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The SIMAX3D BMG Extruder is a black, BMG-style dual drive Bowden feeder with an internal 3:1 gear reduction, and that gearing is what sets it apart from plain dual gear blocks: the motor turns three times for each turn of the drive gears, giving more push and finer control. SIMAX3D aims it at soft filament like TPU, lists PLA, ABS, PETG, nylon, carbon fiber and wood as suitable too, and gives a starting E-step value of 385. Named fits include the Ender 3 series, Ender 5 Pro, CR-10/CR-10S Pro, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8/E10, Geeetech A10 and Prusa i3 kits. The facts below are taken from the listing and published specs.

What stands out

  • 3:1 geared dual drive
  • E-steps 385 suggested
  • Pitched at TPU and soft filament

Who it fits

Good fit for

Bowden printer owners (Ender 3, CR-10, Anet A8, Mega S, i3 kits) who want to print TPU or get steadier feeding than a stock single-gear extruder.

Who should skip it

Direct drive printers, or anyone who wants a no-firmware-change upgrade: the 3:1 ratio needs new E-steps.

Verdict: The geared choice among budget Bowden feeders; plan on a firmware E-step change.

SIMAX3D BMG specs

Dual drive, 3:1 ratio

More torque at the gears.

E-steps: 385

Maker's starting value.

Black, 3.99oz

Listed color and weight.

4.74 x 3.2 x 2.2in package

Boxed size.

Tension by hand screw

Loosen for soft filament.

One extruder in the box

No extra parts listed.

What the 3:1 gearing changes

A geared BMG design spreads each filament step over more motor steps, so the stepper can push stiffer or softer filament without skipping. The listing warns not to over-tighten the hand screw with soft filament, or the filament wraps around the drive wheel. The box holds the extruder only; motor, tube and fittings are yours.

Fitting and calibrating

Set the firmware or printer menu to 385 steps per mm as a start, then measure 100mm of extrusion and correct. Reduce tension for TPU, raise it for rigid filament. Choose the SIMAX3D BMG over an ungeared aluminum dual gear block if you plan to run flexible filament through a Bowden; choose the ungeared type if you never want to touch E-steps.

Before you order

Checks for the SIMAX3D BMG extruder.

Check before you buy

  • Your printer runs a Bowden setup
  • You can change E-steps to about 385
  • Your stepper mount matches the Ender/i3 pattern
  • You keep tension light for TPU

The product at a glance

SIMAX3D Dual Drive BMG Bowden Extruder

Best for: TPU on Bowden printers

Extruder Type
Bowden Extruder, Dual Drive Extruder
Color
Black
Dimensions
4.74 × 3.2 × 2.2 inches
Weight
3.99 ounces

View on Amazon: SIMAX3D Dual Drive BMG Bowden Extruder Affiliate link

SIMAX3D black BMG-style Bowden extruder with 3:1 geared dual drive; E-steps 385; fits Ender, CR-10, Anet, Mega S, i3 kits.

Pros

  • Geared 3:1 drive
  • Starting E-steps given
  • Targets TPU feeding

Cons

  • Needs firmware E-step change
  • Extruder only in box

Good fit if

  • You want TPU on a Bowden printer
  • You can edit E-steps

Skip if

  • You run a direct drive head

Verdict: A geared budget feeder for soft filament.

Specifications side by side

Spec SIMAX3D Dual Drive BMG Bowden Extruder
Extruder Type Bowden Extruder, Dual Drive Extruder
Color Black
Dimensions 4.74 × 3.2 × 2.2 inches
Weight 3.99 ounces
Size 1PCS

Frequently asked questions

What gear ratio does the SIMAX3D BMG use?

3:1, per the listing.

What E-steps does SIMAX3D recommend?

385 as a starting value.

Can the SIMAX3D BMG print TPU?

SIMAX3D aims it at soft filament like TPU, with light tension on the hand screw.

Which printers does it fit?

Ender 3 series, Ender 5 Pro, CR-10/CR-10S Pro, Mega S, Tornado, Wanhao D9, Anet A8/E10, Geeetech A10 and Prusa i3 kits, per the listing.

What is included with the SIMAX3D BMG?

One dual drive extruder.

See also